Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Silver Lakes, CA | San Mateo Construction
Unilock paver and wall work in Silver Lakes typically runs $3,500 to $18,000 depending on scope, and most driveway or patio jobs clear HOA review first, so plan a couple of extra weeks for the process. We are an independent Unilock service provider, not a manufacturer-authorized dealer, which means we can spec the right paver line for your specific lot without pressure to move certain inventory. Our track record in Silver Lakes service area comes from installs and repairs that have survived the high desert’s monsoon runoff and dust, and we handle everything from a small paver patio to a full driveway replacement. Call (855) 901-7266 for a straight answer and a free estimate.
Why Silver Lakes Residents Choose Us for Unilock Service
Most Silver Lakes General Contractor work on Unilock fails for one of three reasons: a base that wasn’t compacted for desert soil, edge restraint that wasn’t anchored for wind and sheet-flow, or joint sand that washed out during the first hard monsoon. We’ve been fixing all three long enough to know exactly what happens to these pavers in unincorporated San Bernardino County. Noel Carrington, our owner, learned the trade at Skyline College and has spent decades on residential jobs across California; he’s particular about base material and drainage detail because he’s seen what happens when a contractor skips them. We’re familiar with Unilock’s product lines and dimensions, and we carry genuine Unilock units and matching edge restraint for repair jobs so the color and profile blend with your existing field. No dealer allegiance, no upsell to a product line you don’t need.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Silver Lakes
- Polymeric joint sand washing out after monsoon sheet-flow: On graded lake-lot slopes and fairway-facing lots, a hard August storm sends water across the paver surface in sheets. If the joint sand wasn’t installed to the right depth and moisture conditions, it liquefies and runs off, leaving pavers loose and weeds sprouting. We re-sweep with quality polymeric sand and then check the slope so water stops pooling where it shouldn’t.
- Efflorescence and salt bloom on Brussels Block and Beacon Hill pavers: Silver Lakes irrigation water is hard, and the rapid wet-dry cycle through summer draws minerals to the surface of Unilock pavers as a chalky white haze. It’s not structural damage, but it’s ugly. We clean it with the right approach and can advise on sealing if you want longer protection from the next bloom.
- Edge restraint failure and paver creep from thin bases: A lot of Silver Lakes homes were built spec, slab-on-grade, with the surrounding soil compacted just enough to pass. When a paver installer runs a thin base over that soil, the edges push out over time, especially where a driveway meets the street. We re-set edge restraint into properly compacted aggregate rather than just pinning it back down.
- Segmental Estate Wall and Pisa2 units settling or bowing: These walls fail in Silver Lakes when drainage behind the wall wasn’t designed for flash-flood saturation. Water builds up behind the block, then the whole wall leans during the next storm. We excavate, add proper drainage aggregate and a drain line where needed, and re-set the Unilock units.
- Heaved paver aprons on fairway-facing driveways: We see this a lot in Silver Lakes: a driveway apron laid over a too-thin base on graded desert soil. Monsoon runoff undermines the edge, and the pavers sink or separate. The fix is not a new top layer; it’s pulling the section, re-compacting the base, and re-laying with restraint that actually holds.
Unilock Service in Silver Lakes: What Local Conditions Mean for Your Equipment
Here’s the part that an out-of-area Unilock service in Victorville or elsewhere usually misses: Silver Lakes is unincorporated, which means your new paver driveway or patio apron doesn’t just need a county permit; it often has to clear HOA architectural review before San Bernardino County will even look at grading and drainage. The paver plan and the slope-and-drainage detail have to be drawn together from the start. If you file a plan that changes your visible frontage without accounting for where monsoon water goes, review will stall or reject it. On a fairway-facing lot, for example, we tore out a heaved Unilock Brussels Block driveway apron where the original base had been laid too thin over graded desert soil and the monsoon runoff had undermined the edge. We re-compacted a proper aggregate base, set new edge restraint with a drainage swale toward the street, re-laid Brussels Block to match the existing field, and finished with polymeric sand. The driveway now sheds water instead of trapping it. That’s the difference between drawing paver work as a hardscape job and drawing it as desert site work.
Unilock Models & Products We Service in Silver Lakes
We work with the Unilock lines that actually get installed across the Silver Lakes housing stock: Brussels Block for tumbled driveways and walkways, Beacon Hill Flagstone for patios, and the Estate Wall and Pisa2 systems for segmented retaining walls. We use genuine Unilock units and matching restraint when replacing a run so color and profile blend with what’s already in place. For base and joint material, we use quality aggregate and polymeric sand where OEM sand adds nothing; where a wall or patio is only locally settled, we lift and re-set rather than tear out the whole field. Replacing the entire field only makes sense when the base has failed structurally, and we’ll tell you which one your situation is before any work begins. Our Unilock sales & service depth covers the full range, not just one or two model lines.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Silver Lakes
Pricing for Unilock work in Silver Lakes depends on square footage, base condition, and whether you’re repairing or starting fresh. Here’s where the numbers sit for our market:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
What drives the cost in Silver Lakes specifically is base excavation and re-compaction on graded desert soil, plus any drainage work the county requires. A free estimate covers the line items and the permit path. Call (855) 901-7266 for an exact quote, and tell me what you actually need, and we’ll figure out the right way to build it.
Serving Silver Lakes, CA — Our Local Coverage Area
We’re based in the Silver Lakes area and know this community well, and we also handle Unilock in Mountain View Acres. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Silver Lakes
Yes, in almost every case. Silver Lakes is an unincorporated HOA community, and any visible exterior change, including a paver driveway, patio apron, or wall, typically has to clear architectural review before San Bernardino County will accept the grading and drainage application. We draw the paver plan and the drainage detail together so your submission isn’t bounced back on a technicality. Call (855) 901-7266 and we’ll walk you through what your specific street requires.
No, and that’s deliberate. We’re an independent contractor that works with Unilock products because we know they hold up in the high desert, but we’re not tied to a distributor quota or a single product line. That independence means we spec the Unilock series that actually suits your lot’s slope, sun exposure, and drainage profile, not the one a dealer wants to move this quarter.
Yes. When we replace a run of pavers or a section of wall, we use genuine Unilock units and matching edge restraint so the color and profile blend with the existing field. For base and joint material we use quality aggregate and polymeric sand; that’s where performance comes from, not the manufacturer’s label. If a patio or wall has settled only locally, we lift and re-set rather than sell you a full replacement.
Most paver patios run three to five days on site, driveways run a week to ten days, and wall repairs depend on how much drainage work has to be redone behind the block. The HOA and county review can add two to four weeks before we can start, so the smart move is to get the design in early. Call (855) 901-7266 and we’ll give you an honest timeline for your specific lot.
We install and repair Brussels Block, Beacon Hill Flagstone, Estate Wall, and Pisa2 systems, which covers most of what’s already installed around the lake and fairways, and we also do Unilock repair in Spring Valley Lake. If you have an older or discontinued Unilock line, we can usually match it or find a close profile. Call (855) 901-7266 with a photo and we’ll tell you what’s possible.
Service Areas Near Silver Lakes
Our Unilock work extends across the high desert and into the Inland Empire. We serve Unilock service in Phelan, where we see similar wind and drought conditions, and Unilock service in Adelanto, where us lot grading presents its own drainage quirks. We also work with homeowners in Helendale, Oro Grande, and Victorville.
Book Your Unilock Service in Silver Lakes Today
If your Unilock driveway, patio, or wall needs a repair, a re-set, or a full replacement, call (855) 901-7266. We’ll schedule a free estimate, draw the permit and HOA path, and build it right for this desert.
Written by Noel Carrington, Owner at San Mateo Construction, serving Silver Lakes and the high desert since day one of our hardscaping practice.