Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Mateo Homeowners Choose Tremron Construction
We’re an independent Tremron in San Mateo construction service provider, and we install, repair, and replace Tremron hardscapes across the Peninsula. Most of the Tremron work we take on isn’t new construction. It’s fixing what San Mateo’s clay soils and winter rain cycles have done to existing paver driveways and patios. We know which Tremron series hold up on the hillsides west of El Camino Real and which ones need serious base correction in the flatlands near the Bay.
Tremron makes a genuinely good paver, but no paver survives a bad base. That’s the honest starting point for every Tremron job we quote in San Mateo. We’re not a Tremron dealer and we don’t have a sales quota tied to any product line. We’re a San Mateo general contractor that installs and services Tremron because their Plaza Series, Kingston Collection, Mega Olde Towne, and Ledgestone lines cover most of what local driveways, patios, and retaining walls actually need. If a different brand fits your project better, we’ll tell you that too. Call (855) 901-7266 for a free estimate.
Why Trust San Mateo Construction for Your Tremron Construction?
Noel Carrington, our owner, grew up in Highlands-Baywood Park near Coyote Point. He spent weekends as a kid helping his father pour concrete footings for a backyard workshop. That’s where he learned that the part you can’t see is the part that fails first. That principle drives how we handle Tremron work: the paver is only as good as what’s under it.
Our crews have re-laid, re-compacted, and re-sanded Tremron surfaces across San Mateo County for years. We can identify whether a Kingston Collection driveway is settling because of base failure or because the original installer skipped edge restraint on a sloped lot. We know that Plaza Series efflorescence is usually a drainage symptom, not a material defect. We saw that firsthand on a Laurelwood project where a ten-year-old Tremron Kingston driveway had settled into ruts and lost its joint sand after every storm. We pulled the affected field, re-compacted the base with additional aggregate to address the clay movement, re-laid the original pavers with new edge restraints, and re-sanded with polymeric sand. That driveway has stayed tight through two rainy seasons since.
OEM-compatible parts matter on Tremron repairs, but so does knowing when to upgrade. We use genuine Tremron pavers for replacement units so color and texture blend, and we use quality aftermarket polymeric sand and edge restraints where they outperform the factory options. Warranty-safe practice means documenting the base work, not just the surface.
Styles & brands we work with







Common Tremron Construction Problems We Fix in San Mateo
- Plaza Series efflorescence after winter rains. The white chalky bloom homeowners see on Plaza Series pavers in San Mateo is usually misinterpreted as fading or a manufacturing flaw. It’s salt migration driven by moisture moving through the paver and evaporating at the surface. If water isn’t draining away from the surface, the efflorescence returns no matter how many times you wash it. We correct the drainage and slope first, then seal.
- Kingston Collection settling and lippage on driveways. San Mateo’s expansive clay soils expand when wet and shrink when dry. If a Kingston driveway was installed with a thin aggregate base or no geotextile separation layer, the pavers move. You see it as uneven edges and low spots that puddle after rain. The fix is base reconstruction to spec, not just re-sanding the joints.
- Mega Olde Towne joint sand washout and edge restraint failure. Mega Olde Towne is a larger-format paver with a rugged look, and it’s popular for patios in San Mateo’s hillside neighborhoods. But on a sloped lot without proper grade away from the house, stormwater channels through the joints and strips the sand out. Edge restraints that weren’t pinned properly let the field creep outward. We re-grade, re-sand with polymeric sand, and pin new restraints where the old ones failed.
- Color fading and surface wear on west-facing driveways. Full afternoon sun on San Mateo’s west side beats on Tremron pavers hard. Over a decade or more, the surface color dulls and the paver texture wears noticeably. This isn’t a warranty issue; it’s UV and abrasion. We can replace heavily worn units with current-production Tremron pavers, but the new ones won’t match sun-faded originals perfectly. Honest answer: if the whole field is faded, sometimes a full replacement is the cleaner long-term move.
- Ledgestone retaining wall blocks shifting on hillside lots. Ledgestone blocks are heavy and they hold a lot of soil. On San Mateo hillsides with slope creep, we see walls leaning or separating at the joints. This is almost always a drainage and geogrid issue behind the wall, not a block failure. We rebuild the wall with proper gravel backfill and weep holes so hydrostatic pressure doesn’t push it apart again.
Tremron Parts & Our Repair-vs-Replace Approach
For damaged Tremron units, we source genuine Tremron pavers and matching accessories so color and texture blend with the existing field. Tremron runs vary slightly from year to year, so we’ll pull a sample from your current installation and match it against current inventory before we order replacements. For joint sand and edge restraints, we use quality aftermarket polymeric sand and engineered edge restraints that outperform what many original installations used.
How we decide repair versus replace comes down to base integrity. If the base is sound but the surface has cracked or stained units, loose joints, or a failed restraint, we repair. Pull the bad pavers, re-set them, re-sand, re-pin. If the base has failed, meaning the pavers are sinking, rutt
ing, or the field has shifted significantly, re-laying the surface alone buys you maybe a year. We’ll tell you that straight. No tear-out unless it’s actually necessary. Call (855) 901-7266 and we’ll walk your site and give you a straight answer.
Our Tremron Service Process – Step by Step
- 1
Site assessment and diagnosis. We walk the entire Tremron surface, check the grade, probe the base in several spots, and look at the drainage patterns around the patio or driveway. We identify whether the failure is surface-level or structural before we quote anything.
- 2
Base correction or surface repair. For structural issues, we excavate to the required depth, install geotextile fabric, compact the aggregate base in lifts to spec, and set the screed layer. For surface repairs, we pull the damaged Tremron units and prep the setting bed.
- 3
Paving, re-sanding, and edge restraint installation. Re-laid Tremron pavers get fresh polymeric joint sand, compacted, and activated with water. Edge restraints are pinned to grade so the field holds its shape through San Mateo’s wet winters.
- 4
Drainage verification and final test. We run water across the surface to confirm slope and drainage, check for ponding, and verify the joints are holding. If something’s off, we fix it before we call the job done.
- 5
Workmanship warranty. We stand behind our base work and paver installation. If the surface fails because of our workmanship, we come back.
See the difference
Before
After
Before
After
Before
AfterTremron Products We Service & Install in San Mateo
We install and service the Tremron Plaza Series, Kingston Collection, Mega Olde Towne, and Ledgestone retaining wall blocks. That covers the bulk of what Tremron produces for residential driveways, walkways, patios, and seat-height walls. For most San Mateo driveways, we recommend the Kingston Collection or Plaza Series, depending on your lot and drainage. Mega Olde Towne works well for patios
where you want a larger paver with an old-world texture. We stock polymeric joint sand, edge restraints, and replacement Tremron units for the most common lines, which means most repairs don’t wait on a special order.
We Also Service These Brands
Tremron is one brand in a much larger portfolio. We also install and service KraftMaid and other cabinet lines, Cambria and Silestone countertops, and Kohler plumbing fixtures. If your Tremron patio is part of a larger exterior-to-interior project, one contract covers the whole scope. No coordinating three separate contractors.
FAQs – Tremron Construction Service in San Mateo
We generally don’t recommend it. An overlay installation over concrete in Foster City or San Mateo is only viable if the
existing slab is perfectly stable, with no cracks, no settling, and proper slope. Most driveways in San Mateo’s older housing stock have some degree of slab movement, and laying pavers over a moving slab just transfers the failure upward. We’ll assess your specific slab and tell you honestly whether an overlay will last or whether a tear-out and proper base installation is the only way to get a Tremron driveway that won’t fail in five years. Call (855) 901-7266 for a site evaluation.
The Kingston Collection and Plaza Series are both workable on Belmont and San Mateo clay, but the paver choice matters less than the base design. Expansive clay needs a deeper aggregate base, geotextile separation fabric, proper compaction in lifts, and edge restraints that are engineered for driveway loads. We typically recommend Kingston for driveways because its modular sizing handles vehicular traffic well, but we spec the base for clay movement regardless of which Tremron line you choose. For an exact quote on your lot, call (855) 901-7266.
Yes, it’s efflorescence, and it’s common on Plaza Series pavers in San Mateo after winter rains. It’s not a manufacturing defect. Moisture moves through the paver, dissolves salts in the concrete or the base material,
and deposits them on the surface as the water evaporates. The long-term fix is correcting drainage so water sheds away from the surface, then sealing. Washing alone won’t stop it from returning.
We can usually source genuine Tremron units from current production runs that blend closely, but we won’t promise a perfect match on a ten-year-old sun-faded surface. Color and texture shift over time. We’ll pull a sample from your installation and match against Tremron’s current inventory before ordering, and we’ll tell you honestly whether the match will be acceptable or whether replacing the whole field is the better aesthetic call. For a free assessment, call (855) 901-7266.
Once the polymeric joint sand is activated and cured, which typically takes 24 to 48 hours depending on San Mateo’s marine air moisture, the patio is ready for foot traffic. Vehicle traffic on a new driveway needs a bit longer, usually about a week for the sand to fully set. We’ll give you a specific timeline for your installation after we see your site. Scheduling a new patio or driveway project this season? Call (855) 901-7266 for a free estimate.
Tremron paver work in San Mateo typically runs from $3,500 for a smaller patio to $18,000 for a full driveway installation with proper clay-soil base preparation. Here’s the breakdown:
| Service | Typical Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Base preparation, drainage correction, and access to your lot all move the final number. The only way to get an exact quote is to
have us walk the site. Estimates are free. Call (855) 901-7266.
Book Your Tremron Service in San Mateo, CA
Tell me what you actually need, and we’ll figure out the right way to build it. That’s how Noel runs every Tremron job, from a cracked paver replacement to a full driveway reconstruction on a sloped San Mateo lot. Call (855) 901-7266 to schedule your free estimate.
Written by Noel Carrington, Owner at San Mateo Construction, serving San Mateo and the Peninsula.