Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in San Juan Bautista, CA | San Mateo Construction
Mr-Glass shower enclosures, custom mirrors, and glass panels serve San Juan Bautista homes well, but they’re only as good as the framing, sealing, and hardware behind them. That’s where we come in. San Mateo Construction provides independent Mr-Glass sales & service across San Juan Bautista, from the historic corridor to rural ranch properties. We’re not a Mr-Glass dealer or authorized agent, so we spec what the building needs, not what a manufacturer program rewards. Call (855) 901-7266 for a free estimate.
Why San Juan Bautista Residents Choose Us for Mr-Glass Service
We’ve spent years installing and repairing Mr-Glass shower enclosures, mirrors, and glass panels across San Benito County, enough to know which framing, sealing, and hardware choices actually hold up in this climate. San Juan Bautista is a small, historic mission town, not a tract-home subdivision, and the housing stock reflects that. Older adobe and wood-frame buildings near the Mission move differently than modern construction. The openings shift. The walls aren’t always plumb. None of that fazes us, because we’ve worked enough old San Juan Bautista homes to expect it. Noel Carrington, our owner, grew up helping his father pour concrete footings and has spent decades on residential jobs across San Mateo County, so when we see an out-of-square opening, we know how to fix it properly rather than force the glass to fit. Tell me what you actually need, and we’ll figure out the right way to build it.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in San Juan Bautista
- Condensation, hard-water etching, and mildew along the bottom sweep. Fog-influenced winters in the San Juan Valley push moisture behind semi-frameless seals, which is why we see so many Mr-Glass doors with cloudy glass and black gasket lines near the sill. We pull the glass, clean or replace the seals, and reset the enclosure.
- Binding pivots and chipped strike edges. Settling and seismic movement in older downtown adobe and wood-frame homes rack door openings out of square. Mr-Glass pivots and sliders bind, the glass chips along the edge, and eventually the panel won’t close. We re-square the surround and re-hang the door rather than just swapping hardware.
- Corroded rollers and shrunk gaskets on sliding enclosures. Coastal-fog moisture and warm summers stress lower-grade hardware. In San Juan Bautista we regularly replace corroded Mr-Glass rollers and hardened bottom sweeps that make the door grind instead of glide.
- Loosened panels at fastener points. DIY installs or prior contractor work anchored into unreinforced masonry or thin historic-wall framing without proper backing. The panel loosens, then cracks at the screw holes. We add solid blocking and re-anchor to structure that can actually hold.
- Leaking walk-in enclosures. When an old tub surround is converted to a walk-in and the waterproofing wasn’t done right, water finds the floor outside the glass. We pull the pan or threshold, redo the waterproofing, and set the Mr-Glass enclosure so it drains correctly.
Mr-Glass Service in San Juan Bautista: What Local Conditions Mean for Your Equipment
Because much of San Juan Bautista’s housing sits within or next to the State Historic Park and historic downtown corridor, glass and shower work here often has to respect historic-character review and be fitted to out-of-square openings in 1800s adobe and wood-frame walls rather than the plumb, code-era framing common in Hollister and Gilroy subdivisions. That changes how we approach a Mr-Glass install. A standard enclosure sized off rough-in measurements won’t just drop in, we take templates at multiple points, account for racking, and build the opening true before the glass goes up. On a Victorian-influenced wood-frame home near the Mission downtown corridor, our crew replaced a failing semi-frameless Mr-Glass slider whose rollers had corroded and whose opening had racked out of square over the decades. We re-squared the surround, anchored new backing into solid framing instead of the old lath, and set a frameless enclosure with fresh seals. The door now glides clean and the fog-season condensation no longer pools along the sweep.
Mr-Glass Models & Products We Service in San Juan Bautista
We install and repair the full Mr-Glass line: frameless sliding shower door systems, semi-frameless pivot shower enclosures, custom-cut mirrored wall panels and medicine-cabinet glass, and clear and low-iron tempered glass panels. We source genuine Mr-Glass replacement hardware and seals where they’re available, and we spec quality aftermarket rollers, pivots, and gaskets when OEM parts are discontinued or overpriced. Either way, we tell you plainly whether a re-seal and hardware swap makes sense or whether the glass itself needs replacing. For San Juan Bautista jobs we keep common Mr-Glass roller sets, gaskets, and pivot hardware stocked locally, so most repairs don’t stall waiting on a parts shipment.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in San Juan Bautista
What you’ll pay depends on the enclosure type, the condition of the opening, and whether we’re repairing glass in place or replacing it entirely. Here’s where our San Juan Bautista Mr-Glass work typically lands:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Remodel | $9,000 – $28,000 |
Every free estimate includes a written line-item quote, not a verbal ballpark. We measure the opening, assess the framing, and tell you what the job will cost before we start. Call (855) 901-7266 to schedule yours.
Serving San Juan Bautista, CA — Our Local Coverage Area
We’re based in the San Juan Bautista area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in San Juan Bautista
Yes, it can, provided we anchor to solid framing or add proper blocking behind the wall surface first. We never sink fasteners into unreinforced adobe or historic plaster without knowing what’s behind it. In San Juan Bautista’s older homes we typically open the wall just enough to add structural backing, re-square the opening, and then set the enclosure so the historic fabric stays intact. Call (855) 901-7266 for an exact quote, estimates are free.
In most San Juan Bautista homes it’s the framing, not the glass. Older adobe and wood-frame buildings settle, and seismic movement from the San Andreas Fault zone racks openings out of square over decades. The Mr-Glass pivot or slider binds on the strike edge and eventually chips. We re-square the surround and re-hang the door before replacing the glass, otherwise the new panel will bind the same way.
Usually repair. We replace the rollers and bottom sweep, clean the track, and adjust the alignment. If the glass itself is etched or the frame is twisted beyond adjustment, replacement makes more sense, and we’ll tell you that plainly either way. Call (855) 901-7266 and we’ll assess the door before recommending any purchase.
Yes. Fog-influenced winters push condensation behind semi-frameless seals, and warm summers bake caulk lines and gaskets. Over time you get hard-water etching, mildew along the bottom sweep, corroded rollers, and shrunk seals. The fix is usually re-sealing and a hardware swap, plus better ventilation in the shower area if the bathroom traps moisture.
Walk-in shower installation runs $4,500 – $12,000 here. A tub-to-shower conversion runs $3,500 – $10,000. Older homes near the Mission may run toward the higher end because the opening often needs re-framing and supplemental waterproofing. Call (855) 901-7266 for a written quote, estimates are free.
Service Areas Near San Juan Bautista
We also work in Hollister, Gilroy, Aromas, and Prunedale, plus the surrounding unincorporated parts of San Benito County. For projects farther out, see our Mr-Glass service in Piñon Hills and Mr-Glass service in Silver Lakes pages, or our San Juan Bautista service area overview for full coverage details.
Book Your Mr-Glass Service in San Juan Bautista Today
We’re a licensed general contractor with one accountable team, not a patchwork of subs. If you need Mr-Glass work in San Juan Bautista, call (855) 901-7266 to schedule your free estimate. We’ll measure, quote, and tell you exactly what your project needs.
Written by Noel Carrington, Owner at San Mateo Construction, serving San Juan Bautista since 2009.