Mr-Glass Construction in Lexington Hills, CA

Mr-Glass Construction in Lexington Hills, CA | San Mateo Construction

We provide independent Mr-Glass sales, installation, and repair across Lexington Hills and the surrounding Santa Cruz Mountains, and we also offer Los Gatos Mr-Glass service. San Mateo Construction is not a Mr-Glass factory outlet or an authorized service arm. We’re a licensed general contractor that installs and services Mr-Glass shower enclosures, tub-to-shower conversions, and custom glass on homes where the floors are rarely level and the walls are almost never plumb. If you need a Mr-Glass frameless enclosure fitted to a pier-and-beam mountain cabin rather than a flatland tract house, call us at (855) 901-7266.

Call (855) 901-7266

Why Lexington Hills Residents Choose Us for Mr-Glass Service

Most glass crews around the Bay Area spend their days on slab foundations in San Jose or San Mateo, but we also handle Mr-Glass service in Monte Sereno. Lexington Hills is different. We’ve hung Mr-Glass enclosures in redwood cabins off Old Santa Cruz Highway where the existing subfloor ran 3/4-inch out of level and the studs leaned enough to rack a frameless door in its first season. Our owner, Noel Carrington, grew up in Baywood and spent years framing and finishing homes across San Mateo County before focusing on whole-home remodeling. That background matters when a Mr-Glass panel has to seal against a wall that hasn’t been square since the Eisenhower administration.

Because we’re independent, we’re not locked into any manufacturer’s playbook. We source the right Mr-Glass hardware and glass spec for your actual opening, not the opening the manufacturer assumes you have. That independence shows up in how we work: re-squaring openings with new blocking, shimming bases to level, and choosing OEM hinges, seals, and sweeps wherever the glass and drilling pattern allow. We stock common Mr-Glass hardware locally so a binding hinge or worn sweep in Lexington Hills doesn’t turn into a two-week parts wait from a distant distributor.

Common Mr-Glass Construction Problems We Solve in Lexington Hills

• Out-of-plumb walls and out-of-level floors racking frameless doors. Pier-and-beam foundations settle with the wet winters here, and a Mr-Glass frameless panel that swung clean at install can bind at the strike jamb six months later. We shim and re-square the opening instead of forcing the hardware to hold a bad angle.
• Loose pivot and hinge hardware chipping glass edges. Original Mr-Glass installs on mountain cabins often used hardware sized for drywall and plumb studs. When the house shifts seasonally, the hinges loosen, the glass edge chips at the strike jamb, and a small chip becomes a crack. We re-bed the hinges and replace worn OEM parts before the panel fails.
• Hard-water spotting and mineral etching from mountain well water. Lexington Hills homes pull from wells that leave calcium and mineral deposits on Mr-Glass tempered panels. Homeowners often mistake it for a coating failure. It’s not. It’s mineral buildup, and it can usually be removed or at least arrested with the right treatment and a properly sealed enclosure.
• Moisture wicking behind redwood or tile surrounds. Older wood-sided Lexington Hills cabins show this as efflorescence and soft frame edges where an improperly sealed Mr-Glass enclosure has been letting water behind the surround. On redwood walls, that moisture sits and rots. Fixing the seal and the flashing detail is a job for someone who understands both the glass system and the structure behind it.
• Storm movement shifting openings and breaking seals. Severe winter storms saturate the slopes and swell the soils around Lexington Hills foundations. A Mr-Glass enclosure sealed tight in October can be out of square by February. When we service a door that’s dragging after a storm, we check the opening, not just the hinge.

Mr-Glass Service in Lexington Hills: What Local Conditions Mean for Your Equipment

Here’s a detail you won’t find on a generic Mr-Glass page. Because Lexington Hills is unincorporated Santa Clara County and sits inside a high-fire-severity zone, glass and mirror deliveries to steep private roads off Old Santa Cruz Highway often need a smaller truck or hand-carry staging. A full-size delivery vehicle simply can’t make the final grade or the turnaround on many of those narrow roadways. That’s not a scheduling inconvenience. It changes how we order, stage, and protect glass for your project. On a pier-and-beam redwood cabin off Old Santa Cruz Highway, our crew tore out a leaking alcove tub and set a Mr-Glass frameless walk-in enclosure, but the existing floor was 3/4-inch out of level and the wall studs weren’t plumb. We re-squared the opening with new blocking, shimmed the base, and hung the OEM pivot and panel so the door swung clean and sealed. The truck stayed at the road and we hand-carried the glass up the drive. That’s what Mr-Glass service in Lexington Hills actually looks like.

Contractors in this area also know that a project can stall in county plan review if the site plan doesn’t show both the 100-foot defensible-space zone and the septic system’s approved expansion area. A shower enclosure itself doesn’t trigger that review, but a tub-to-shower conversion that touches drain lines and wet walls sometimes does. We handle the paperwork and the building details together, so the glass and the county requirements don’t fight each other.

Mr-Glass Models & Products We Service in Lexington Hills

We install and service the full Mr-Glass shower and glass line, including Semi-Frameless and Frameless door-and-panel enclosures, Neo-Angle and Neo-Round corner shower enclosures, and Sliding Bypass shower doors for alcove tub-to-shower conversions, plus Mr-Glass repair in Cambrian Park. We also handle custom-cut tempered glass panels and mirrors cut to opening, which matters when your Lexington Hills cabin has window openings or vanity walls that were never quite standard size. For parts, we use OEM Mr-Glass hinges, seals, sweeps, and handles wherever the original drilling pattern allows. When an OEM part is discontinued, we explain the tradeoff before we switch to a quality aftermarket replacement. If the glass itself is chipped or the opening is too far out of square for hardware to hold, we’ll tell you directly whether repair or replacement makes sense.

For a wider look at the brand and our Mr-Glass sales & service across the region, see that page.

Mr-Glass Service Pricing in Lexington Hills

FAQs – Mr-Glass Construction in Lexington Hills

Service Areas Near Lexington Hills

We serve Lexington Hills and the surrounding mountain communities. For reference, our Lexington Hills service area page covers the ZIP codes and roads we work most often. We also provide Mr-Glass service in Brookdale and Mr-Glass service in Lompico, and regularly take on projects in San Mateo, Burlingame, and Highlands-Baywood Park.

Book Your Mr-Glass Service in Lexington Hills Today

Tell me what you actually need, and we’ll figure out the right way to build it. Call (855) 901-7266 to schedule your free estimate. If it’s a genuine emergency with a failed Mr-Glass enclosure, we’ll tell you what the fastest real-world option is for your road and your site.

Written by Noel Carrington, Owner at San Mateo Construction, serving Lexington Hills and the Santa Cruz Mountains.