Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Elkhorn, CA | San Mateo Construction
We provide Mr-Glass service in Watsonville and independent Mr-Glass shower enclosure service across Elkhorn, from frameless slider systems to semi-frameless pivot doors and neo-angle corner units. The thing that separates our Mr-Glass work here from anywhere else: we know how Elkhorn’s salt air, damp winters, and unincorporated coastal-zone permitting shape every repair and install decision. Call (855) 901-7266 for a free estimate on Mr-Glass service in Elkhorn.
San Mateo Construction is an independent contractor – not authorized, sponsored, or endorsed by Mr-Glass. We work on their enclosures because we’ve seen how they hold up (and where they don’t) in North Monterey County’s coastal environment. You can read more about our full Mr-Glass sales & service capabilities, or keep going for what matters specifically in Elkhorn.
Why Elkhorn Residents Choose Us for Mr-Glass Service
We carry OEM Mr-Glass rollers, hinges, seals, and sweeps so your enclosure keeps its factory fit and finish. When a part’s discontinued, we’ll tell you before we hand you an aftermarket substitute, and we’ll explain the tradeoff in plain terms. That’s the kind of straight answer Noel Carrington, our owner, has given homeowners for three decades.
Noel grew up in the Baywood neighborhood of San Mateo, helping his father pour concrete footings on weekends. He studied construction technology at Skyline College and has spent the years since running residential and light commercial jobs across San Mateo County. His rule on Mr-Glass work hasn’t changed: “Tell me what you actually need, and we’ll figure out the right way to build it.”
For Elkhorn owners, that means we don’t push a full replacement when new rollers and a marine-grade re-seal will hold. And we don’t patch a corroded frame and call it good when the coast will eat it again in a year. You get a recommendation tuned to where you live.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Elkhorn
- Corroded aluminum channels and pivot hardware. Mr-Glass frames take a beating in Elkhorn’s salt-laden air. The aluminum channel develops chalky oxidation, and pivot rollers seize up until the door won’t swing without force. We replace the hardware and treat the channel so it moves clean again.
- Failed silicone seals and bottom sweeps. Constant fog and damp winters break down Mr-Glass seals faster here than ten miles inland. When the sweep fails or the silicone separates, water wicks behind the enclosure and quietly rots the shower curb. We strip the old seal, re-bed the frame, and use marine-grade silicone that holds through a full fog season.
- Etched and cloudy glass from Elkhorn’s water and air. Rural ranch parcels in Elkhorn often run on well water with high mineral content. Combined with damp coastal air, that etches Mr-Glass panels and clouds the frameless look faster than most owners expect. If the glass is pitted, we’ll say so and recommend replacement; if it’s surface-level, we’ll explain your options honestly.
- Out-of-plumb jambs and curbs on older farmhouses. Elkhorn’s housing stock includes a lot of 1940s and 1950s farmhouses where door openings and curbs have settled out of square over the decades. A factory-sized Mr-Glass pivot door will gap and swing wrong if the unit was never shimmed to the real opening. We re-shim the frame and re-set the door so it actually closes.
- Leaks at glass-to-glass butt joints. Custom Mr-Glass butt-joint enclosures rely on precise alignment and clean silicone lines. On Elkhorn properties where foundations have shifted or framing flexes with seasonal moisture, those joints open up. We re-align panels and re-seal the joints to stop water from escaping the enclosure.
Mr-Glass Service in Elkhorn: What Local Conditions Mean for Your Equipment
Here’s what most glass companies miss: because Elkhorn is unincorporated and borders the Elkhorn Slough coastal zone, even a shower-enclosure swap that touches framing or drainage can pull in Monterey County and coastal-development review. In Mr-Glass in Las Lomas or other incorporated cities, swapping a shower door is usually just a swap. In Elkhorn, if the existing curb is rotted and we’re re-framing the threshold or adjusting a drain rough-in, the county may want a permit and possibly a coastal overlay sign-off. A crew that only works inside city limits won’t know to check for that before they tear things apart. We do. Our Elkhorn clients avoid surprise stop-work orders and redo costs because we flag the permit question up front, every time.
At a 1940s farmhouse off Elkhorn Road, the owners’ Mr-Glass semi-frameless pivot enclosure had seized on corroded bottom rollers and the silicone sweep was leaking onto an out-of-plumb tile curb. We pulled the unit, replaced the OEM rollers and sweep, re-shimmed the frame to the real opening, and re-sealed the curb with marine-grade silicone so the door swung clean through a full fog season. That’s the difference between knowing Mr-Glass parts and knowing Elkhorn buildings. You need both.
Mr-Glass Models & Products We Service in Elkhorn
We service the Mr-Glass model lines most common in Elkhorn homes:
- Mr-Glass frameless sliding shower door systems
- Mr-Glass semi-frameless pivot shower enclosures
- Mr-Glass Neo-Angle corner shower units
- Mr-Glass custom glass-to-glass (butt-joint) enclosures
For each, we source OEM rollers, hinges, seals, and sweeps where the factory still supplies them. Our parts run keeps the common wear items in stock for fast Elkhorn turnaround: bottom sweeps for slider systems, pivot roller kits for semi-frameless doors, and the hinge sets that go into neo-angle units. When a factory part is discontinued, we use quality aftermarket hardware only after explaining what changed and why it’ll still hold up on the coast.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Elkhorn
The table below reflects what Mr-Glass enclosure work typically runs in the Elkhorn market. Your final number depends on glass size, frame condition, curb or jamb work, and whether the county wants a permit on top.
| Service | Typical Range |
|---|---|
| Frameless Glass Shower Enclosure Installation | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Walk-In Shower & Shower Remodeling (full bathroom context) | $9,000 – $28,000 |
Every estimate we write is a free, line-item quote. You’ll see exactly what’s labor, what’s parts, and what’s the Mr-Glass hardware before you sign anything. Call (855) 901-7266 and we’ll schedule a time to measure and price your enclosure properly.
Serving Elkhorn, CA — Our Local Coverage Area
We’re based in the Elkhorn area and know this community well, and we also serve customers looking for Mr-Glass in Pajaro. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Elkhorn
Yes, in most cases, when the corrosion is limited to the rollers, hinges, or channel surface and the glass itself is still clear and sound. We’ll replace OEM hardware, clean and treat the aluminum, and re-seal with marine-grade silicone. But if the frame is corroded through or the glass is etched from Elkhorn’s well water and salt air, a patch won’t hold on the coast, and we’ll recommend replacement. Call (855) 901-7266 and we’ll tell you which camp your enclosure falls into.
Only if the work touches framing, plumbing rough-ins, or drainage adjustments. A straight glass-and-hardware swap usually moves forward without a permit. But because Elkhorn is unincorporated and sits near the Elkhorn Slough coastal zone, any project that involves curb re-framing or drain changes can trigger Monterey County and coastal-development review. We check this before we start so you’re not surprised mid-project.
It’s the combination of Elkhorn’s damp coastal air and, on many rural parcels, mineral-heavy well water. The constant moisture keeps the glass surface reactive, and the minerals bake in. Over time that produces the cloudy, etched look you don’t see at an inland house with municipal water. If your enclosure has pitted badly, replacement glass may be the only real fix, and we’ll tell you that honestly.
Most straight installs take one to two days once materials are on site, but an older Elkhorn farmhouse adds time when jambs and curbs are out of plumb. We re-shim the frame to the real opening instead of forcing the factory dimensions, and if the curb needs re-framing or sealing, that adds another day. We’ll give you a realistic schedule before we start, not after.
Frameless Mr-Glass enclosure installation typically runs $4,500 to $12,000 in Elkhorn, with shower replacement work between $3,000 and $8,500. Full walk-in shower remodels that include tile, curb work, and plumbing fall in the $9,000 to $28,000 range. Call (855) 901-7266 for an exact quote – estimates are free.
Service Areas Near Elkhorn
We serve Elkhorn and the surrounding communities along the Monterey Bay’s northern shore. If you’re in the area, check our Elkhorn service area page for coverage details. We also run Mr-Glass service in Mr-Glass service in Castroville and Mr-Glass service in Prunedale for owners further inland.
Book Your Mr-Glass Service in Elkhorn Today
If your Mr-Glass enclosure needs attention, don’t wait for a small leak to become a rotted curb. Call (855) 901-7266 now to schedule your free, line-item estimate. We’ll measure, inspect, and tell you exactly what your enclosure needs – repair or replacement – with no push toward the more expensive option.
Written by Noel Carrington, Owner at San Mateo Construction, serving Elkhorn and the Monterey Bay area since starting in the trade three decades ago. We also work as a General Contractor in Elkhorn.