Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Belmont, CA | San Mateo Construction
We provide independent Mr-Glass service across Belmont, CA, from replacement windows and sliding patio doors to frameless shower enclosures and custom glass. The one thing that makes our Mr-Glass work here different is the hillside reality: most of the glass failures we see in Belmont trace back to slope-driven water runoff and out-of-square openings in older homes, not ordinary wear and tear. We’re San Mateo Construction, led by Noel Carrington, and we’ve been working Mr-Glass products into Belmont homes long enough to know exactly how the terrain stresses them. We also offer General Contractor in Belmont services for projects beyond glass. Call (855) 901-7266 for a free estimate.
Why Belmont Residents Choose Us for Mr-Glass Service
We know Mr-Glass product lines the way a mechanic knows an engine. We’ve installed their vinyl replacement series in mid-century Belmont ranch homes, serviced their aluminum sliding doors on foggy lower-slope lots, and rebuilt their frameless shower enclosures in bathrooms where the walls haven’t been square since the Eisenhower administration. We’re an independent Mr-Glass service provider, not authorized, sponsored, or warranty-endorsed by the manufacturer, so when we tell you a frame is worth saving or a sealed unit needs replacing, that’s based on what we’re seeing in the opening, not a brand directive.
Noel grew up a few blocks from Coyote Point in San Mateo and spent his youth pouring concrete footings with his father. He studied construction technology at Skyline College and has worked residential and light commercial jobs across San Mateo County for the better part of three decades. His framing is tight, his permit packages are clean, and his job sites run on schedule. When it comes to Mr-Glass windows, doors, and shower enclosures in Belmont, he’s the one who decides whether we repair and reglaze or replace. You’ll find the full scope of our Mr-Glass sales & service experience there, and it’s built on the same principle: tell us what you actually need, and we’ll figure out the right way to build it.
We also carry the practical side of the equation. We stock common Mr-Glass sealed units, rollers, weatherstripping, and hardware locally, which keeps turnaround tight for Belmont jobs. If a component isn’t available for your series, we’ll tell you upfront and spec a quality equivalent, then give you the choice. No vague reassurances, no parts you didn’t agree to.
Styles & brands we work with







Common Mr-Glass Construction Problems We Solve in Belmont
- Fogged dual-pane sealed units. South- and west-facing windows on exposed Belmont slopes take direct afternoon sun for years. The perimeter seal on older Mr-Glass dual-pane units cooks, the desiccant fails, and you get that permanent haze between the panes. We replace the sealed unit and reseal the opening, and on slope-exposed walls we’ll often recommend a glazing option with better UV handling.
- Water intrusion at window and door sills. Winter storms push heavy runoff down Belmont’s hillsides, and on homes where drainage wasn’t regraded since the original build, that water finds the sill. We replace rotted sill framing, reseal the rough opening, and set new Mr-Glass units so the next storm doesn’t repeat the damage.
- Sticking, corroded patio door tracks. Grit and moisture from foggy lower-slope lots in Belmont work their way into aluminum sliding door tracks. Rollers grind, tracks corrode, and the door starts sticking or failing to seal. We replace rollers and track hardware, usually the same visit, and realign the panel so it closes tight.
- Glass stress cracks from out-of-square openings. Older Belmont hillside homes settle. Walls drift. Door and window rough openings go slightly parallelogram. The glass gets stressed along the frame line and eventually cracks. We don’t just swap the glass; we shim and plumb the frame before setting the new Mr-Glass unit so the stress point doesn’t come back.
- Shower enclosure panels that bind or leak. Frameless Mr-Glass shower enclosures are precise pieces of glass. In a bathroom where the walls have moved even a quarter inch over forty years, the panel binds at the hinges or leaves a gap at the jamb. We reset the enclosure with proper shimming and watertight seals, which is a far better fix than forcing the panel into a bad opening.
Mr-Glass Service in Belmont: What Local Conditions Mean for Your Equipment
Belmont sits on hillsides and canyons along the lower Peninsula. Homes on the Belmont Hills, along the Belmont Creek watershed, and up the steeper lots off Ralston Avenue routinely shed storm runoff against window and door openings after winter rains. Many of those homes are mid-century ranch and Eichler-era builds from the 1950s and 60s, and we frequently find original single-pane or early dual-pane glazing with frames that have absorbed decades of that moisture. The result isn’t gradual wear; it’s concentrated failure: rotted sills on the downslope side, fogged units on the sun-exposed side, and shower enclosures that bind because the wall framing moved years before anyone noticed. This slope-driven water exposure is what drives most of our Mr-Glass calls in Belmont, and it’s the reason our repair approach here differs from what we’d do on a flat lot in San Carlos Mr-Glass service or Redwood City. On a steep Belmont Hills lot off a tight sloped street where staging the truck was half the job, we replaced a bank of fogged dual-pane windows and a binding aluminum slider on a mid-century ranch home, cutting out rotted sill framing the winter runoff had soaked and resealing the openings before setting new Mr-Glass units. We also reset a frameless shower enclosure whose panel had cracked from an out-of-square opening, shimming the wall to plumb before rehanging the glass. That’s Belmont work.
Mr-Glass Models & Products We Service in Belmont
We service the Mr-Glass vinyl replacement window series common to Belmont’s tract and ranch homes, the aluminum sliding window and patio door lines many of the older hillside houses still carry, framed and frameless shower enclosure glass, and custom-cut mirror and interior glass products. For any of them, we use genuine Mr-Glass replacement components when they’re available for the series: sealed units, rollers, weatherstripping, hardware. When a series has been discontinued or the part isn’t stocked, we spec an equivalent-quality aftermarket component and tell you exactly which is which. If the frame is sound, we repair and reglaze. If slope movement or rot has compromised the frame or the rough opening, we’ll say so plainly and recommend replacement as the better money. On Belmont hillside homes, that’s often the more honest answer, and we’d rather tell you the truth than sell you a repair that fails in two winters.
Mr-Glass Service Pricing in Belmont
What you’ll pay for Mr-Glass window, door, or shower enclosure work in Belmont depends on the condition of the openings, the number of units, and whether slope or water damage has reached the framing. On a ranch home with clean openings, a window replacement often falls toward the lower end of the range. On a hillside house where we’re cutting out rotted sills and resealing slope-exposed walls, the labor goes up because we’re rebuilding the opening, not just swapping glass. Here’s how the current pricing tends to land on Belmont jobs:
| Service | Typical Belmont Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Roof Repair (where glass work ties into flashing) | $400 – $1,800 |
Every free estimate includes a written line-item price and a straight answer on whether we’re repairing or replacing. Call (855) 901-7266 and we’ll schedule a time to walk the openings with you.
See the difference
Before
After
Before
After
Before
AfterKey Takeaways
- We’re an independent Mr-Glass provider in Belmont, CA, not manufacturer-authorized, so our repair-versus-replace advice is based on the actual condition of your openings.
- Belmont’s hillside runoff and out-of-square mid-century framing are the leading local causes of window, door, and shower-glass failures we address.
- We use genuine Mr-Glass components when available and tell you when we’re using equivalent aftermarket parts.
- Free estimates include written line-item pricing and no obligation.
Serving Belmont, CA — Our Local Coverage Area
We’re based in the Belmont area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Belmont
Fogged dual-pane windows happen when the perimeter seal fails and moisture gets between the panes. On Belmont’s exposed south- and west-facing slopes, direct afternoon sun accelerates that seal failure far faster than on shaded flat lots. The desiccant inside the unit saturates, and the haze becomes permanent. We replace the sealed unit and reseal the opening, and on particularly exposed walls we’ll recommend a glazing spec better suited to full sun. Call (855) 901-7266 if you’re seeing fog between your panes.
Yes, and it’s the most common issue we see here. Winter storms drop heavy rain on Belmont’s steep hillsides, and runoff drains against downslope window and door openings. Over years, the sills and rough framing absorb water, rot, and shift. Shower enclosures in those same homes bind because the wall framing has moved. Working on a slope-affected Belmont opening is different from a dry flat-lot repair; we account for drainage and sill condition before setting any new glass.
Usually, yes. We shim and plumb the wall surface before rehanging the glass, which keeps the panel from binding at the hinges or leaking at the jamb. The key is correcting the mounting plane first, not forcing the enclosure into a bad opening. On a steep Belmont Hills lot we recently reset a frameless panel whose crack came from exactly that. If the existing wall is too far gone, we’ll tell you, and we’ll build the corrected wall before the enclosure goes in.
For many Belmont hillside homes the answer is yes, and not just for storm protection. Impact-rated windows also reduce noise from nearby traffic on the peninsula, and they hold up better to the wind and rain exposure that comes with being up on a slope. The tradeoff is cost: impacting windows typically run from $8,000 to $25,000 depending on the number of openings and the condition of the existing frames. We’ll give you a precise number before any work starts. Call (855) 901-7266 for a free estimate.
No. We’re an independent Mr-Glass service provider, not authorized, sponsored, or warranty-endorsed by Mr-Glass. That’s intentional. It means when we recommend a repair over a replacement, or vice versa, the recommendation is coming from what the building actually needs, not from a manufacturer program.
Service Areas Near Belmont
We serve all of the Belmont service area, including the hillside neighborhoods along the Belmont Hills and the lower slopes near the Belmont Creek watershed. Our crews also cover nearby San Mateo, Burlingame, Highlands-Baywood Park, Foster City, and Hillsborough. For Mr-Glass work in adjacent cities, see Mr-Glass service in Millbrae and Mr-Glass service in Redwood Shores.
Book Your Mr-Glass Service in Belmont Today
If you’re in Belmont and your Mr-Glass windows are fogged, your slider is binding, or your shower enclosure is leaking, call (855) 901-7266. We’ll schedule a free estimate, walk the openings with you, and give you a straight answer on repair versus replacement.
Written by Noel Carrington, Owner at San Mateo Construction, serving Belmont and our San Mateo Mr-Glass service area since the company’s founding.