Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Alum Rock, CA | San Mateo Construction
We provide independent Mr-Glass shower enclosure installation, repair, and replacement across Alum Rock, with the same crew handling your glass, waterproofing, and tile work. What makes our Mr-Glass work here different comes down to one thing: most mid-century Alum Rock bathrooms are out of square, and square-cut enclosure kits don’t forgive that. Call (855) 901-7266 for a free estimate on Mr-Glass service in Alum Rock, or keep reading to understand what your shower actually needs.
As the owner of San Mateo Construction, I learned early that glass work is only as good as the opening it hangs from. We’re an independent contractor, not an authorized Mr-Glass dealer, so our only loyalty is to fitting the enclosure to your actual opening. For Alum Rock homes, that means measuring, shimming, and sometimes rebuilding the curb with a General Contractor in Alum Rock before the first panel ever leaves the truck.
Why Alum Rock Residents Choose Us for Mr-Glass Service
We’ve installed and repaired Mr-Glass repair in San Jose, including frameless hinged enclosures, semi-frameless sliders, and Neo-angle corner units in enough 95127 homes to know which models survive East San Jose hard water and which don’t. Noel Carrington, who runs our crew, spent nearly three decades on residential and light commercial jobs across San Mateo County, and the lesson carries over to Alum Rock: glass failures usually trace back to the substrate, not the glass itself.
When a Mr-Glass door sags or a sweep stops sealing in an Alum Rock bathroom, the cause is almost never the manufacturer. It’s the stucco-era wall that drifted half an inch out of plumb, or the cracked slab under the curb that let the whole unit settle. We diagnose the opening first, then the hardware. That’s why we stock Mr-Glass OEM seals, hinge bushings, and sweep gaskets, and keep aftermarket profiles on hand for discontinued parts, always measured against your actual opening before anything gets installed.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Alum Rock
- Door sag from out-of-square walls. Mid-century stucco-and-wood-frame Alum Rock homes rarely have perfectly plumb walls. A square-cut Mr-Glass enclosure installed without correcting the opening will sag at the hinge and lose seal contact at the strike side. We shim or rebuild the wall interface so the glass hangs true.
- Hard-water etching and white spotting. East San Jose water carries heavy mineral content, and Mr-Glass glass and anodized frames show it fast, especially around pivot hinges where water sits. We clean and reseal, and we can recommend coating routines that slow the buildup between service calls.
- Shifting curbs and cracked slabs. Older Alum Rock homes with settling foundations can shift a shower curb enough to throw panels out of plumb. When that happens, sweeps stop touching the threshold and water escapes. We rebuild the curb and re-level the base before resetting glass.
- Aftermarket seal failures at the pivot and glass-to-wall junctions. Cheap universal gaskets don’t match Mr-Glass profiles. Within months, they tear or pull away from the hinge side, leaking exactly where you don’t see it until the baseplate rusts. We use OEM profiles when available, and proven aftermarket matches when not.
- Leaking tub-to-shower conversions. When a tub alcove becomes a walk-in shower with a Mr-Glass semi-frameless slider, the waterproofing below the pan matters more than the glass above it. We address the pan, drain, and wall board before the enclosure goes in, because glass can’t fix a leaking substrate.
Mr-Glass Service in Alum Rock: What Local Conditions Mean for Your Equipment
Here’s the thing most glass companies won’t tell you about Alum Rock: the Santa Clara County boundary cuts right through the neighborhood, and it changes what you’re legally allowed to do in your own bathroom. A straightforward Mr-Glass enclosure swap, where the pan and valve stay put, is usually a fixture replacement and doesn’t trip a permit. But converting a tub alcove to a tiled walk-in shower with a Mr-Glass frameless unit is a structural change, and on county parcels, that often pulls a Santa Clara County permit rather than a City of San Jose one. We confirm jurisdiction before the first cut. On a compact mid-century stucco home near the Alum Rock Avenue corridor, we replaced a tired tub with Mr-Glass in Seven Trees as part of a full tub-to-shower conversion; the existing curb was out of level and the back wall wasn’t plumb, so we squared the base and adjusted the hinge side before dropping glass. We used OEM gaskets and a matched pivot kit, and the owner ended up with a sealed, spot-free shower instead of the leaking framed unit they’d had. That job happened because we checked which agency governed the parcel before we ordered materials.
Mr-Glass Models & Products We Service in Alum Rock
We install and service the full Mr-Glass enclosure range: 3/8-inch and 1/2-inch frameless hinged shower enclosures, semi-frameless sliders for tub-to-shower conversions, Neo-angle corner shower units, and custom-cut framed glass for tub surrounds. For Alum Rock work, we keep common Mr-Glass OEM seals, hinge bushings, and sweep gaskets stocked locally so turnaround doesn’t stall while parts ship from a distributor. When an OEM part has been discontinued, we reach for aftermarket profiles that match the original extrusion, measured against the actual glass thickness and hinge geometry. The goal is simple: if the glass is intact and only hardware has failed, we repair. If the opening is out of square or the glass is scratched or chipped, replacement is the honest call. Our Mr-Glass sales & service work treats the enclosure as part of a whole-bathroom system, not a bolt-on.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Alum Rock
Pricing for Mr-Glass in Buena Vista and Alum Rock depends on the scope, the enclosure model, and what’s hiding under the existing pan. Here’s what we typically see for the jobs we take on:
| Service | Typical Alum Rock Price Range |
|---|---|
| Frameless glass walk-in shower enclosure (part of walk-in install) | $4,500 – $12,000 |
| Tub-to-shower conversion with new glass | $3,500 – $10,000 |
| Shower replacement (glass and pan) | $3,000 – $8,500 |
| Full bathroom remodel including shower glass | $9,000 – $28,000 |
The spread comes down to tile work, waterproofing method, and whether we’re working around existing plumbing or moving the drain. A free estimate includes exact measurements of the opening, a plumbing and substrate check, and a line-item quote before any work starts. Call (855) 901-7266 for numbers specific to your Alum Rock bathroom.
Serving Alum Rock, CA — Our Local Coverage Area
We’re based in the Alum Rock area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Alum Rock
It depends on the parcel and the scope. A straight enclosure replacement, where the pan, drain, and valve stay in place, is generally a fixture swap and doesn’t need a permit. But removing a tub and converting the alcove to a tiled walk-in shower is a structural change, and on unincorporated Alum Rock parcels that can trigger county permitting. We check jurisdiction before starting. Call (855) 901-7266 if you want us to look up your property’s status.
Because the sweep usually isn’t the cause. In Alum Rock homes, the real culprit is almost always an out-of-level curb or a slab that settled just enough to drop the glass out of plane. A new sweep on a tilted panel still won’t seal. We measure the opening, re-level the base if needed, and only then address the gasket profile. Call for an inspection before you replace another sweep.
Yes, in many cases, but it has to be planned. Half-inch glass needs a solid, level curb and a wall stud layout that can carry the hinge load. On compact mid-century Alum Rock lots, the opening may need shimming or a reinforced curb before heavy glass goes in. We’ll measure and tell you honestly whether 1/2-inch or 3/8-inch is the safer spec for your space.
Squeegee after every shower, and apply a glass sealant or hydrophobic coating every few months. East San Jose water leaves mineral deposits quickly, especially where droplets sit on the lower panels and around hinges. For Alum Rock homes, we also recommend checking the frame drain holes so water doesn’t pool against the gaskets. We can seal your glass during installation or service.
If the glass is intact and the opening is square, a hardware repair with the right OEM or matched aftermarket parts is almost always the cheaper fix. If the glass is scratched, chipped, or the opening has drifted out of square to the point where shims won’t correct it, replacement is the honest call. For an exact price on either path in Alum Rock, call (855) 901-7266 and we’ll measure it.
Service Areas Near Alum Rock
Our Mr-Glass service covers Alum Rock service area and the surrounding East San Jose and South Peninsula communities. We routinely work in Mr-Glass service in East Foothills, Mr-Glass service in Communications Hill, San Mateo, Burlingame, Highlands-Baywood Park, Foster City, Hillsborough, and Belmont.
Book Your Mr-Glass Service in Alum Rock Today
If you’re ready for a shower enclosure that’s measured to your Alum Rock bathroom, not cut from a template, call us at (855) 901-7266. Estimates are free, and we’ll tell you what you actually need. As Noel puts it, “Tell me what you actually need, and we’ll figure out the right way to build it.”
Written by Noel Carrington, Owner at San Mateo Construction, serving Alum Rock and the greater East San Jose area.