Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Temecula, CA | San Mateo Construction
We provide independent KraftMaid cabinetry installation, refacing, and repair across Temecula – and the thing that sets our KraftMaid work here apart is that we know exactly how Temecula’s dry valley heat and HOA rules shape a cabinet job before it even starts. We’re a licensed general contractor led by Noel Carrington, and we’ve pulled apart enough 1990s KraftMaid kitchens in Redhawk and Harveston to know when a cabinet box is worth saving and when it’s done. Call (855) 901-7266 for a free estimate, and we’ll tell you straight what your kitchen actually needs.
Why Temecula Residents Choose Us for KraftMaid Service
KraftMaid cabinetry shows up in a lot of Temecula tract homes built between 1985 and 2005 – the Vantage all-plywood line ordered through Home Depot, Traditional raised-panel oak and maple fronts, and the Prelude bath vanities that went into every secondary bathroom in the planned communities. We know these boxes inside and out because we’ve been refacing, re-fronting, and replacing them across ZIPs 92590, 92591, 92592, and 92593, plus Murrieta Hot Springs KraftMaid service, for years.
Noel grew up a few blocks from Coyote Point in San Mateo, pouring concrete footings with his father on weekends, and he spent three decades on residential and light commercial jobs before building San Mateo Construction into a whole-home general contractor. He brings that same material-level thinking to every KraftMaid job in Temecula – which means we check the carcass, the face frames, and the hardware before we quote anything.
We’re an KraftMaid sales & service provider in the independent sense: we install and repair the cabinetry, but we’re not authorized, sponsored, or warranty-backed by the manufacturer. That independence means we’ll recommend OEM KraftMaid hinges and glides when they’re available and worth the wait, and quality aftermarket soft-close hardware when OEM parts are back-ordered or discontinued. We won’t sell you a full tear-out when refacing gets the same result for less.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Temecula
Here’s what we see most often in Temecula kitchens and baths, and what we do about it.
- Thermofoil and laminate-wrapped drawer fronts peeling along the bottom edges. This is the classic KraftMaid failure mode, and Temecula’s 95°F-plus summers make it worse. The dry heat cycles against kitchen moisture from dishwashers and sinks, and the thermofoil layer separates. We strip the old wrap, assess the substrate, and either re-front or reface depending on how far the peeling goes.
- Soft-close hinges and undermount glides failing after 15 – 25 years. Original KraftMaid soft-close hardware on 1990s and 2000s production kitchens simply wears out. We replace hinge cups, slide rails, and drawer glides with OEM KraftMaid parts where available, or spec Blum and similar aftermarket hardware that fits the existing 35mm bore holes.
- Sun-faded door fronts on west-facing kitchens. In Temecula homes where low-E window upgrades weren’t paired with cabinet updates, the afternoon sun bleaches and yellows KraftMaid oak and maple fronts that face the window wall. We match the existing finish where we can, and when we can’t, we re-front the whole run so it doesn’t look patched.
- Kick plates and toe-kick faces swelling near dishwashers and under-sink cabinets. Slow leaks plus Temecula’s seasonal slab movement push moisture into the particleboard-core toe-kick panels. We cut in new panels, seal the edges, and fix the underlying leak before we rebuild the base.
- Pass-through and exterior-adjacent cabinet changes caught in HOA review. When a KraftMaid kitchen refresh includes a new window, a patio pass-through, or exterior trim, the HOA in Redhawk or Paseo del Sol needs drawings and color samples first. We build that packet alongside the county permit so the cabinet job doesn’t stall waiting on design-review sign-off.
KraftMaid Service in Temecula: What Local Conditions Mean for Your Equipment
Here’s the thing about Temecula that doesn’t show up in a catalog: this is a master-planned city where almost everything was built after 1980, and most of the housing stock is production-built tract homes from the 1980s through 2000s. Mediterranean-style stucco exteriors, concrete tile roofs, and KraftMaid repair in Murrieta and Temecula kitchens that went in on day one. Those original kitchens are now 20 to 40 years old – old enough that the cabinet boxes are often still structurally sound, but the doors, drawer fronts, and hardware are showing their age from two decades of Temecula valley heat.
In Redhawk specifically, we routinely see kitchens where the thermofoil has peeled back from the bottom edges of the upper cabinets right above the dishwasher. That’s not a coincidence – it’s the heat-and-steam cycling that’s built into a Redhawk kitchen’s layout. And because Redhawk sits in the wildland-urban interface, Riverside County’s fire-safe building codes and HOA design-review rules shape every exterior-adjacent change. We schedule around that. When a homeowner wants a KraftMaid refresh plus a window swap or patio pass-through, we submit the HOA packet first, then order the cabinets so delivery lands after design review clears.
KraftMaid Models & Products We Service in Temecula
We install, reface, and repair the full KraftMaid range you find in Temecula’s tract homes: Vantage all-plywood door-and-box kitchens ordered through Home Depot, Traditional and Transitional raised-panel and shaker styles in maple and oak, Deluxe full-access and drawer-base cabinets with soft-close hardware, and Prelude recessed-panel bath vanities. We stock common KraftMaid hinge cups, mounting plates, drawer glides, and touch-up kits locally for faster turnaround on repair work. When we reface, we match the existing door profile and finish – and if the match isn’t close enough, we’ll tell you before we cut anything.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Temecula
What you’ll pay depends on whether we’re repairing a few doors, refacing the whole kitchen, or tearing out to the studs. Here are the ranges we quote for KraftMaid work in Temecula:
| Service | Typical Range |
|---|---|
| Kitchen Remodel (full, with KraftMaid cabinets) | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Every estimate is free and written as a line-item quote. We don’t do change-order games. If a box is water-damaged or out of square, we’ll show you before you spend a dollar more. Call (855) 901-7266 and we’ll price your exact kitchen.
Serving Temecula, CA — Our Local Coverage Area
We’re based in the Temecula area and know this community well. Use the map below to see our service coverage — if you’re nearby — including KraftMaid repair in Wildomar — we can almost certainly help.
FAQs – KraftMaid Construction in Temecula
Yes, we can match most KraftMaid door profiles and finishes on cabinets from the 1990s through 2000s, but the match depends on sun exposure and age. West-facing Temecula kitchens fade, so a brand-new door may not match a sun-bleached neighbor. We’ll show you the physical sample against your existing cabinet before ordering. If the match isn’t acceptable, we re-front the full run instead.
No. If the box and face frame are solid, we strip the failing thermofoil and re-front the doors and drawer fronts – often with OEM KraftMaid replacements or a matched aftermarket door. Full replacement only makes sense when the carcass is water-damaged or the boxes are out of square. Call (855) 901-7266 and we’ll tell you which side of that line your kitchen is on.
Yes. We build the HOA architectural-review packet – drawings, material specs, color samples – alongside the Riverside County permit package, and we submit both before ordering cabinets. That scheduling matters in Redhawk and Paseo del Sol, where the design-review committee meets on its own calendar.
We use OEM KraftMaid hinges, glides, and mounting hardware where they’re available and quick to source. When OEM parts are discontinued or back-ordered, we spec aftermarket soft-close hardware – usually Blum – that fits the existing 35mm bores and works the same. We’ll tell you which we’re putting in and why.
They can be either. We write cabinet, countertop, and backsplash as separate line items so you see exactly what each piece costs, but we can bundle them into one contract with one schedule. Since we’re a general contractor – not just a cabinet installer – we can also fold in the window swap, patio cover, or pass-through cut that your kitchen refresh needs. Call (855) 901-7266 for a free line-item estimate.
Service Areas Near Temecula
We handle KraftMaid service across Temecula’s 92590, 92591, 92592, and 92593 ZIPs – Redhawk, Harveston, Wolf Creek, Paseo del Sol, and the surrounding planned communities. For projects further out, we also cover KraftMaid service in Fallbrook to the south and KraftMaid service in Yucca Valley to the northeast. We’ll come to Temecula service area neighborhoods across the valley.
Book Your KraftMaid Service in Temecula Today
Tell me what you actually need, and we’ll figure out the right way to build it. Whether it’s refacing a Redhawk kitchen or full replacement in Harveston, we’ll give you a straight answer and a free written estimate. Call (855) 901-7266 to book.
Written by Noel Carrington, Owner at San Mateo Construction, serving Temecula since day one with independent KraftMaid installation, refacing, and repair.