Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Loyola, CA | San Mateo Construction
We install and repair Jerith aluminum and vinyl fencing throughout Loyola, and the work here has a specific rhythm: oak root zones, sloped lots, and Los Altos design review. Call (855) 901-7266 and we’ll come out, look at the grade and the trees, and tell you exactly what your Jerith fence needs. As an independent contractor, we work for you, not for Jerith. One contractor, every system, from fence line to driveway.
Why Loyola Residents Choose Us for Jerith Service
Noel Carrington, our owner, grew up in San Mateo County pouring concrete footings with his father, and he’s spent the decades since learning which systems hold up and which don’t. That matters in Loyola because a Jerith fence is only as good as its posts. Where the clay shifts and the winter rains soak the ground, a post base plate from the hardware store fails in two seasons. We’ve seen it enough times on Loyola properties to know you spec stainless hardware, dig footings deeper than the manufacturer’s minimum, and hand-dig around protected roots instead of sawing through them. Tell me what you actually need, and we’ll figure out the right way to build it.
Most of our Loyola customers have mid-century ranch homes on large lots. They’re not looking for a fence company. They’re looking for one accountable contractor who understands that the same crew installing their Jerith fence might also replace their driveway or build their ADU. We carry that breadth, and we don’t upsell. If a repair will hold, we say so.
Styles & brands we work with







Common Jerith Construction Problems We Solve in Loyola
- Post base plates loosening or rusting where fence lines meet shifting clay: Every wet winter in Loyola saturates the topsoil, the clay expands, and base plates on shallow posts start to lift or corrode. We re-set posts below the movement zone and spec stainless or galvanized hardware. Jerith panels are solid; the factory base plates are often not up to those soil conditions.
- Powder-coat chalking and fading on sun-exposed aluminum: A Jerith Traditional aluminum panel facing a southern exposure on a dry Loyola summer sits in UV all day. The powder coat gets chalky, and in the worst cases the aluminum scratches easily at latch points. We restore what can be restored, and we’ll tell you honestly when a recoat is throwing good money after bad.
- Racked or sagging aluminum panels and gate droop on sloped lots: A lot of properties in Loyola have a real grade change from street to house. When a Jerith Provence run gets installed level instead of racked to the slope, panels end up with ugly steps at the post. We rack the panels properly and shim the gates so they swing true. On the tree-lined streets of 94024, gate droop is the most common call we get after a new fence ages two or three years.
- Vinyl pickets cracking or panels bowing from UV and wind load: Jerith vinyl privacy fences on elevated, ridge-side lots in Loyola take wind directly against the full panel face. Over time, UV makes the vinyl brittle, and the wind load bows panels inward. We can replace individual pickets and reinforced posts; if every panel is bowing, replacement is usually cheaper than patching.
- Fence lines routed wrong around heritage oaks: We’ve taken calls from Loyola homeowners whose previous contractor set posts in a straight line right toward a protected oak. Then the tree report comes back, the arborist flags root zones, and the whole section has to be re-routed. We run the tree check before the auger goes in, not after.
Jerith Service in Loyola: What Local Conditions Mean for Your Equipment
On the tree-lined streets of 94024, a single protected heritage oak can stall or redesign an entire remodel. For a Jerith fence, that means post spacing and footing depths often have to be redesigned around preserved root zones, not just site lines and property pins. In a city like Sunnyvale, you’ll run a straight post line and be done by lunch. In Loyola, you hand-dig the post holes because an auger will tear through the root system a city arborist has already flagged. The arborist report is a standard line item, and on some lots the tree-protection plan forces a fence line to curve or dogleg around the root crown. That’s not a complication we work around; it’s the starting point. We set deeper footings than the Jerith spec calls for so the fence survives Loyola’s clay movement, and we use rackable Jerith Traditional panels to track the grade instead of leaving gaps or step panels. If you’re buying a Jerith fence in Loyola, get the tree report first. It changes the layout, and it changes the quote.
Jerith Models & Products We Service in Loyola
We install and repair the full Jerith residential line: Traditional aluminum ornamental panels (including the rackable panels we prefer on sloped lots), Provence and Versaille decorative aluminum styles, Jerith aluminum gates and arbor kits, and the Privacy vinyl and picket lines. For structural and finish-critical pieces, we source genuine Jerith posts, brackets, caps, and pickets. For hinges, latches, and fasteners, we use US-made aftermarket hardware where it outperforms proprietary parts, especially on gate hinges near salt-adjacent air and hillside moisture. We stock common Jerith post sizes and gate hardware so most Loyola service calls don’t wait on a distributor. Jerith sales & service across the Mid-Peninsula runs through our shop, and we carry what we’ve learned these fences actually need.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Loyola
Jerith work in Loyola costs more than it does on a flat, treeless lot in a newer subdivision, and the reason is simple: footings, trees, and grade. You’re paying for hand-digging around root zones, deeper posts to get below the clay movement, and racked panels that follow a slope. A straight vinyl privacy run might sit at the lower end of the range; an ornamental aluminum fence around the perimeter of a hillside lot with two heritage oaks sits higher.
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Driveway Replacement | $5,000 – $14,000 |
We give free written estimates that include the tree-zone constraints, the footing depths, and the fence material. No line item is invented, and the price we quote is the price we build to. Call (855) 901-7266 for an exact quote. Estimates are free, and we’ll tell you if a repair makes more sense than a full replacement.
Serving Loyola, CA — Our Local Coverage Area
We’re based in the Loyola area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Loyola
Yes. We order Jerith Traditional in the rackable panel configuration and set the posts to follow the grade, so the top rail tracks the slope cleanly. Stepped panels are what you get when a crew installs panels level on a sloped lot. We’ve corrected that on Loyola properties more times than we can count.
Yes, and it affects the footings too. The tree report tells us where the protected root zone stops, and in many cases we hand-dig post holes to that line. If the root zone crosses your intended fence line, the posts shift, the panels get racked, and the arborist signs off after the install. Call (855) 901-7266 and we’ll walk the property and talk through what the tree report will require.
Jerith’s aluminum will outlast most fences, but the two trouble points in Loyola are UV on southern exposures and moisture at the base plates. We recommend stainless base plate hardware and deeper footings, and we’ll note any southern-facing panels that may need a recoat earlier than the rest of the line. A good install with the right hardware will go over twenty years; a factory-spec install with zinc plates in Loyola clay will need attention inside five.
If one or two pickets are cracked and the posts are sound, we’ll swap the pickets and reinforce the rail. If nearly every panel is bowed, a full replacement is almost always the better value. Vinyl panels bow from UV brittleness and wind load, and fresh pickets on bowed rails will just crack again. Call (855) 901-7266 for a straight assessment and a written quote.
It’s almost never the gate panel; it’s the post and the hinges. See if the hinges are zinc. If so, the oldest post plate has started to rust, and the gate sags as the post leans. We re-set the post deeper, add stainless hinges, and square the gate to the latch. We do this regularly on older properties in 94024, and most gate repairs don’t require a new gate.
Service Areas Near Loyola
We work throughout the Mid-Peninsula. That includes Loyola service area and the surrounding communities: Los Altos, Mountain View, Palo Alto, and Cupertino. For homes further up the Peninsula, see Jerith service in Sunnyvale and Jerith service in Sausalito.
Book Your Jerith Service in Loyola Today
Call (855) 901-7266 and we’ll schedule a walk-through. We’ll look at the grade, check the tree zones, and give you a written line-item estimate for the fence and any related work, like a driveway replacement or a new gate. Loyola service area calls get the same crew and the same standard. Free estimate, no obligation.
Written by Noel Carrington, Owner at San Mateo Construction, serving Loyola since the company’s founding.