Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Claremont, CA | San Mateo Construction
We provide independent Dvele construction service across Claremont, and the short version is this: we’re not a Dvele dealer, and we’re not authorized by Dvele. We’re a licensed general contractor who knows how these modular packages actually go together, which matters on Claremont lots where foothill wildfire codes, design review, and older housing stock collide. Call (855) 901-7266 for a straight answer on your Dvele roof, exterior, or interior remodel.
Dvele homes arrive as factory-built modules with precision tolerances, proprietary connection hardware, and specific roofing and glazing profiles. When something fails or you want to remodel, the fix is rarely a stock part. Our crew has worked through Dvele Signature and Panorama series homes enough to plan around module seams, MEP chases, and finish joints instead of discovering them mid-job. We’re independent, which means we tell you what’s actually needed.
Why Claremont Residents Choose Us for Dvele Service
Most contractors in Claremont will quote a Dvele job like it’s a standard stick-built remodel. It isn’t. A module seam leaking on the windward elevation is not a flashing patch you grab off the shelf. A Dvele low-slope roof isn’t shingle work. A kitchen remodel inside a modular package means working around load paths and chases that don’t exist in a conventional frame. We know the difference because we’ve done the work.
Noel Carrington, our owner, grew up learning concrete work from his father in San Mateo and spent nearly three decades on residential and light commercial jobs before building out our Dvele service capability. His approach hasn’t changed: figure out what the structure actually needs, then build it right. Tell me what you actually need, and we’ll figure out the right way to build it. That’s how we handle Dvele work in Claremont, from roof replacement to full kitchen remodeling.
We carry OEM Dvele components for module connection hardware, glazing frames, and the roofing and flashing profiles these packages were designed around. When a part is proprietary and back-ordered, we tell you whether a quality equivalent is safe or whether waiting is the better call. We don’t up-sell a full re-roof or re-clad when a targeted repair genuinely solves it.
Styles & brands we work with
Common Dvele Construction Problems We Solve in Claremont
- Module seam and chase penetration leaks: Factory joints that weren’t fully sealed at set translate into water intrusion and stucco staining on the windward elevation after the first wet season. North Claremont homes facing the Santa Ana wind corridor see this more than flat inland lots.
- Low-slope roof leaks over conditioned space: Dvele roof assemblies tend toward membrane or metal panel systems, so a leak trace isn’t a shingle patch. It’s locating a seam or penetration, which takes longer and needs real roofing detail work.
- Interior finish cracking along module seams: Claremont’s hot, dry summers make modular structures move. Drywall joints and seams open up, especially on homes where roof-mounted equipment was added without re-checking load paths.
- Glazing-heavy wall modules on foothill lots: Panorama series homes with large glazed walls need ember-resistant upgrades after a Santa Ana event or when wildfire code compliance gets triggered. The frame, flashing, and panel interface all re-detail to the module, not a generic wall assembly.
- Heat and sun exposure on exterior finishes and roofing: Claremont sits at the base of the San Gabriel Mountains. Intense sun and wind events accelerate wear on Dvele membranes, metal panels, and exterior coatings, especially on north Claremont parcels backing toward the foothills.
Dvele Service in Claremont: What Local Conditions Mean for Your Equipment
North Claremont parcels backing toward the San Gabriel foothills sit in a WUI/wildfire zone where a roof or exterior change can pull in defensible-space and ember-resistant venting requirements that an identical Dvele package on a flat inland lot in the same 91711 ZIP never triggers. And the two lots can be a few blocks apart. That split changes the scope of a Dvele repair or remodel before we even open the walls. Near the Village, the math flips another way. Claremont’s design-review and historic-preservation culture means even a straightforward panel or roofing change on a Dvele addition can be a submittal conversation, not a permit over the counter. The city wants Craftsman-era and mid-century character preserved, and a modular roofline or glazing change that reads as generic tract build will get pushback. We plan for both conditions from the first estimate, because guessing wrong costs time and money.
On a foothill lot above Foothill Blvd in north Claremont, we took on a Dvele modular home whose windward elevation was leaking at a module-to-module seam and staining the exterior finish every wet season. We re-detailed the seam and chase penetrations, replaced the compromised flashing, and re-roofed the low-slope section in standing seam metal with ember-resistant venting to bring the assembly into foothill ignition-resistance requirements. The homeowner got a dry, code-aligned envelope instead of a repeating patch-and-paint cycle.
Dvele Models & Products We Service in Claremont
We work on the full Dvele line: the Signature series modular home, Panorama series with large glazed wall modules, open-plan single-story modular packages, and two-story modular home packages. The parts approach is the same across all of them. We lean on OEM Dvele components for module connection hardware, glazing frames, and the specific roofing and flashing profiles the package was designed around. Aftermarket substitutions at those interfaces cause callback problems, and we’d rather tell you that up front than chase leaks later. For roofing, we handle standing seam metal, membrane systems, and low-slope assemblies. For interior work, we remodel Dvele kitchens and baths without disturbing module structure or load paths.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Claremont
Pricing for Dvele work in Claremont depends on whether we’re repairing a targeted failure or replacing a full system. The table below reflects what we see across 91711.
| Service | Price Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Metal Roof Installation (standing seam) | $15,000 – $40,000 |
| Roof Repair | $400 – $1,800 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
What drives cost? Low-slope Dvele roofs in the foothill corridor need more detail work than a flat-lot shingle roof. Ember-resistant venting and WUI compliance add scope. Module seam re-detailing is labor-intensive because the flashing has to match the original Dvele profile. A free estimate includes a written line-item breakdown so you see exactly what’s being done and why. Call (855) 901-7266 to schedule yours.
Serving Claremont, CA — Our Local Coverage Area
We’re based in the Claremont area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Claremont
Yes, we work on Dvele modular homes throughout Claremont. No, we are not Dvele-authorized. We’re an independent general contractor, not sponsored, authorized, or warranty-endorsed by Dvele. That independence is the point. We recommend repairs based on what the structure needs, not what a manufacturer program dictates. We’ll use OEM Dvele parts where they matter, and we’ll tell you honestly when a quality equivalent is safe or when waiting on a back-ordered proprietary component is the better call. Call (855) 901-7266 to discuss your specific Dvele issue.
Likely yes. North Claremont parcels backing toward the San Gabriel foothills sit in a WUI/wildfire zone, and a roof replacement on those lots can trigger defensible-space and ember-resistant venting requirements. A standing seam metal roof on a Dvele low-slope assembly is actually a good fit for compliance, but the venting and edge detailing have to be brought up to ignition-resistance standards. We handle the roofing detail work and the WUI code alignment together, because doing them separately costs more and delays final inspection. Call (855) 901-7266 for a free estimate on your foothill Dvele roof.
Claremont’s hot, dry summer cycles make modular structures move, and Dvele factory seams and drywall joints are the points where movement shows. The cracking is usually cosmetic, but we re-check load paths before re-taping and finishing the seams. If roof-mounted equipment was added after the original set, the structure may be moving more than it should. We’ll determine whether the fix is re-finishing or something structural, then give you a straight answer. Estimates are free.
Yes. The open-plan Dvele kitchen is one of the easier parts of a modular home to remodel, as long as we map the MEP chases and module load paths first. We handle full kitchen remodeling, cabinet installation, and countertop work while keeping the module structure intact. You choose from vetted material tiers: KraftMaid or Wellborn cabinetry, Cambria or Caesarstone countertops, and Kohler, Grohe, Toto, or Moen plumbing fixtures. Call (855) 901-7266 to walk through your Dvele kitchen remodel scope.
Yes. Claremont’s historic Village core and surrounding Craftsman-era neighborhoods have strong preservation culture, so exterior changes, roofline modifications, and panel or glazing swaps on a Dvele addition near the Village can require design review submittal rather than an over-the-counter permit. The city expects work to match the character of the existing stock. We prepare permit packages with that reality in mind and flag design-review risk early, because the last thing you want is a remodel stalled in submittal. Call (855) 901-7266 to discuss your Dvele project near the Village.
Service Areas Near Claremont
We serve Claremont and the surrounding foothill communities, including Pomona, La Verne, San Dimas, and Upland. If you’re looking for Dvele service in Pomona or Dvele service in Buena Park, we cover those areas too. Our broader reach spans the San Mateo County service region as well, where we first built our Dvele capability. See our Claremont service area page for full coverage details, or learn more about our broader Dvele sales & service work.
Book Your Dvele Service in Claremont Today
If your Dvele roof is leaking, your module seams are cracking, or you’re planning a kitchen remodel inside a modular package, we’ll give you a straight answer and a written estimate. Call (855) 901-7266 today to schedule your free Dvele service estimate in Claremont.
Written by Noel Carrington, Owner at San Mateo Construction, serving Claremont and the greater San Mateo County region.