Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Felton, CA | San Mateo Construction
We provide independent CWS construction service across Felton, from door framing and hardware to full kitchen remodels and roof replacements that tie into CWS service in Ben Lomond and surrounding areas. What makes our CWS work here different is simple: we plan every job around Felton’s Chapter 7A wildland-urban interface code, the redwood root and moisture problems that come with building under a dense canopy, and the slope-and-pier foundations that older mountain cottages sit on. Noel Carrington leads our team, and we’ve spent years working CWS systems in the San Lorenzo Valley, so we know what actually holds up here. Call (855) 901-7266 for a free estimate.
Why Felton Residents Choose Us for CWS Service
Most contractors in Felton know CWS doors as one line item on a spec sheet. We know how a CWS hinged door behaves when the jamb framing behind it has been sitting in damp shade for twenty years, because we’ve opened enough walls in this valley to see what the redwoods do to framing. That’s the difference. We’re not a manufacturer-authorized service center, and we won’t pretend to be. We’re an independent CWS service in Lompico and Felton provider, which means we make repair decisions based on what’s actually wrong with your door and your wall, not on what a warranty department will approve.
Noel grew up in San Mateo County helping his father pour concrete footings, studied construction technology at Skyline College, and has spent nearly three decades on residential and light commercial jobs across the region. He runs our Felton projects the same way he runs everything else: figure out what the building actually needs, then do the work in the right order. For CWS doors, that often means fixing the drainage or the framing first, then rehanging the door so it won’t rack again in two years.
Styles & brands we work with
Common CWS Construction Problems We Solve in Felton
- Moss and moisture infiltration under the redwood canopy. Felton’s dense coast redwoods keep the ground shaded and damp much of the year. We regularly open walls around CWS door openings on shaded slopes and find threshold framing that’s been quietly rotting for years. The door still swings, but the wood behind the hinges is gone.
- Pier-and-post foundation movement causing doors to bind. Older mountain cottages in Felton often sit on piers or slopes, and the ground shifts seasonally with rain and dry spells. When a foundation settles, the rough opening racks, and a CWS door that closed perfectly last summer suddenly binds at the top corner or won’t latch.
- Ember and smoke damage to CWS finishes and seals. The dry late summer and fall in the San Lorenzo Valley bring Cal Fire red-flag restrictions and real wildfire risk. Unprotected exterior doors take smoke, ember, and heat exposure, which hardens gaskets, dulls finishes, and compromises weatherstripping over repeated fire seasons.
- Hidden decay in redwood-era cabins. Many Felton homes were built decades ago with true redwood framing, which resists rot better than fir but still fails eventually. When we pull trim around an old CWS door on one of these cabins, we often find decay in the jambs and sill that wasn’t visible from either side of the wall.
- Hardware and hinge failure from racking walls. A CWS door is only as good as the wall it’s hung in. When the framing behind a door has shifted even a quarter inch, the hinges take load they weren’t designed for, and eventually the hardware wears unevenly or the hinge screws strip out.
CWS Service in Felton: What Local Conditions Mean for Your Equipment
Felton sits in the San Lorenzo Valley among redwoods and steep, fire-prone slopes, and that changes how we work in ways that don’t apply over the hill in Scotts Valley or down in Santa Cruz proper. The county enforces Chapter 7A wildland-urban interface rules here for exterior work and rebuilds, and every project we do with a CWS door or opening gets framed around shaded fuel breaks, ember-resistant vents, and the WUI review process. That means a simple exterior door replacement can trigger requirements for the surrounding wall assembly, the vents, and the roof edge. On a shaded slope cabin off Felton’s redwood corridor, our crew opened a wall around a CWS door and found root-driven moisture had rotted the threshold framing and jambs. We replaced the decayed framing, reset the CWS door with new seals and hardware, and added a root barrier and drainage detailing so the opening drains away from the house. That’s what building under redwoods actually requires here.
Tell me what you actually need, and we’ll figure out the right way to build it.
CWS Models & Products We Service in Felton
We service the full CWS door line: hinged doors, hydraulic doors, wood doors, and custom doors. When a CWS door needs new hardware, seals, or gaskets, we use OEM or equivalent quality parts so warranty-eligible components stay in good order. We also make honest repair-vs-replace calls based on what the surrounding framing and slope conditions look like, because in Felton the door itself is rarely the whole story. If a door is racked because the foundation shifted, replacing the door without addressing the piers just means doing the job twice. We stock common CWS hardware and seal components for fast turnaround on Felton jobs, and we can order less common parts quickly when needed. Browse our full CWS sales & service page for more detail on what we cover.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Felton
What you’ll pay depends on whether we’re fixing a door, rebuilding the opening, or doing our Home Remodeling in Felton that happens to include CWS work. Here’s a straight set of ranges for the work we most often do around Felton:
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
Site conditions drive the number. A kitchen remodel in a Felton cabin on piers with root intrusion and WUI requirements will land on the higher end, and that’s honest. A free estimate from us includes a look at the actual conditions on your property, not a phone quote. Call (855) 901-7266 and we’ll come out.
Serving Felton, CA — Our Local Coverage Area
We’re based in the Felton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Felton
Yes. Chapter 7A requires ember-resistant vents, ignition-resistant materials, and specific clearance and detailing around exterior openings in Felton’s wildland-urban interface zones. That means we can’t just swap a CWS door and walk away. We have to verify the surrounding wall assembly, vents, and thresholds meet current WUI standards, and we coordinate with the county’s review process on any job that touches the building envelope. Call (855) 901-7266 for an exact quote on your project, and we’ll check your specific parcel’s requirements.
Because the ground stays damp under redwood canopy and the roots find their way into everything. Moisture gets into the threshold and jamb framing, the wood swells and eventually rots, and the door starts binding or sagging. On older cabins with pier foundations, seasonal ground movement racks the rough opening and makes the problem worse. We fix the cause, not just the symptom: repair or replace the framing, improve drainage, reset the door with new seals and hardware, and add root barriers where the site calls for it.
Usually, yes. CWS hardware and seal components are available as OEM or equivalent quality parts, and we can match most existing finishes and configurations on their hinged, hydraulic, wood, and custom door lines. The bigger question is whether the framing behind the door is sound enough to hang a new door on. We’ll give you that answer straight before you spend money on the door itself.
We check the foundation and the floor plane first, because our General Contractor in Felton knows a kitchen remodel on a Felton slope cabin on piers is a different job than a kitchen remodel on a flat lot in Santa Cruz. If the piers have shifted, we correct or reinforce them before framing cabinets, and we design around the movement the site actually has. Drainage and root barriers get built into the plan so water moves away from the new work. A kitchen remodel in Felton typically runs $14,000 to $45,000 depending on these conditions. Call (855) 901-7266 for a free estimate based on your actual site.
The dry late summer and fall bring Cal Fire red-flag restrictions in the San Lorenzo Valley, and that dictates when and how crews can work. Hot work like roofing may be shut down entirely on high-fire-danger days, and material deliveries can slow. We plan Felton projects around that reality from the start, scheduling exterior and roof work in the safer windows and keeping interior work moving during fire season. If you’re planning a CWS-involved remodel or rebuild, call (855) 901-7266 now so we can map the schedule around the county’s seasonal restrictions.
Service Areas Near Felton
We serve Felton and the surrounding San Lorenzo Valley communities. If you’re near Mount Hermon, we can run up the road for CWS service in Mount Hermon. Over the hill, we also cover CWS service in Scotts Valley, where the Chapter 7A requirements are less intense but the same CWS door problems still apply. See our full Felton service area page for coverage details.
Book Your CWS Service in Felton Today
We know CWS doors, and we know Felton construction. If your CWS door is binding, leaking, or sitting in a rotted opening, or if you’re planning a remodel that involves CWS work, call (855) 901-7266 to schedule your free estimate. We’ll come out, look at the actual conditions, and tell you what the job really needs.
Written by Noel Carrington, Owner at San Mateo Construction, serving Felton and the San Lorenzo Valley.