Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Redwood City, CA | San Mateo Construction
We provide independent CGI cabinet and countertop installation, refacing, and repair across Redwood City, from the flatland bungalows of 94063 to the Redwood Shores waterfront. What makes CGI work different here is the ground under the house: in 94061 and 94063 you’re often dealing with a pre-1960 raised foundation that may need seismic work before a permit will clear, while in 94065 the bayfill settles and shifts, and cabinets rack out of square if you ignore it. We plan CGI work around those realities, not in spite of them. CGI sales & service through our shop covers the full model range, and we’re one contractor from roofline to foundation, so the seismic retrofit, the reframe, and the new cabinet run all come through the same accountable team. Call (855) 901-7266 for a free estimate.
Why Redwood City Residents Choose Us for CGI Service
Most Redwood City General Contractors will hang your cabinets. Fewer will tell you, before they order anything, that your 1948 sill plates are still unbolted and the permit desk won’t sign off on the kitchen until the cripple wall is braced. We will, because we’ve worked both ends of this city’s housing stock long enough to know what the inspector is going to flag. Noel Carrington grew up in Baywood in San Mateo, poured concrete footings with his father as a kid, and has spent decades running residential jobs across San Mateo County. That background means we read the house before we spec the finish, not after. We carry OEM-compatible CGI hinges, slides, and door fronts for fast turnarounds, and we’re honest about when a repair makes sense versus when a box is too far gone to save. We’re an independent CGI service provider, not authorized, sponsored, or warranty-endorsed by CGI. Tell me what you actually need, and we’ll figure out the right way to build it.
Styles & brands we work with
Common CGI Construction Problems We Solve in Redwood City
- Thermofoil and painted door faces blistering along the bottom rail. In the pier-and-beam crawlspace homes of 94061 and 94063, there’s no hard freeze to dry out the subfloor. Humidity sits in that crawlspace year-round, wicks up through the box, and lifts the finish right off the bottom rail. We see this constantly in the older flatland stock.
- Frameless CGI boxes racking out of square in Redwood Shores. The 94065 homes sit on imported bayfill and engineered fill. Differential settlement is a fact of life out there. The floor moves a quarter inch over three seasons, and frameless full-overlay cabinets have no face frame to hide the rack. Doors drag, drawer fronts gap, and the reveals go uneven.
- Moisture wicking at the slab edge in hillside homes. In 94062 and 94064, a failed retaining-wall drain or a hillside runoff problem pushes water against the slab edge. CGI particleboard-core boxes and quartz seams both absorb it. The box swells, the stone stains, and the corner cabinet starts binding.
- Seismic retrofits twisting existing cabinet runs. When a pre-1960 house in 94063 gets sill-plate bolting and cripple-wall bracing, the load path changes. The house moves slightly, and an original CGI cabinet run that was installed decades ago can pop seams and misalign doors once the foundation work settles in.
- Water intrusion behind Redwood Shores slab foundations. The high water table in 94065 means under-slab moisture is always pushing up. Without proper vapor barriers and dewatering during the original build, the lower cabinet boxes absorb that moisture over years, and by the time we’re called the particleboard is soft at the toe kick.
CGI Service in Redwood City: What Local Conditions Mean for Your Equipment
Redwood City’s permit desk sees both ends of the same week: a 1940s raised-foundation house in 94063 usually needs sill-plate bolting and cripple-wall bracing permitted before a kitchen remodel will be signed off, while a Redwood Shores 94065 addition on bayfill needs engineered piers or under-slab dewatering first. This is the sharp split that defines construction here, and it shapes every Woodside CGI service project we take. A kitchen remodel off Middlefield Road in 94063 isn’t just cabinets and counters. It’s a seismic retrofit that has to happen first, and then the finish work gets sequenced behind it. Across town in Redwood Shores, a CGI cabinet run on a settling slab has to be leveled and shimmed carefully, because the floor won’t ever be truly flat, and the install has to accommodate the movement. That dual reality, flatland retrofit and bayfill settlement, is something you simply don’t get in San Mateo or Burlingame the same way you get it here.
CGI Models & Products We Service in Redwood City
We install and service the CGI Euro-style frameless full-overlay cabinet lines, the shaker and slab-door lines in painted and thermofoil finishes, and the CGI quartz and granite countertop surfacing. Vanity and linen cabinet lines come through us too. On parts, we use CGI OEM hinges, drawer slides, and door or drawer fronts on anything recent, which keeps the warranty path clean. Where OEM is discontinued or priced out of reason, we stock quality aftermarket hardware like Blum-style slides and soft-close hinges, and we’ll tell you upfront which way we’re going. Our honest stance on repair versus replace: if the CGI boxes are solid and only the doors, hardware, or finish are failing, we repair or reface. If the particleboard core has swollen or the box is racked, we replace the run rather than chase it with shims and hope.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Redwood City
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the spread on CGI work in Redwood City? The condition of the floor and the foundation, mostly. A flat, modern slab in Redwood Shores is a straightforward install. A 1940s raised floor in 94063 with 3/4-inch of sag means leveling, shimming, and often a retrofit before the cabinets even arrive. Countertop pricing shifts with the stone selection and the number of seams. Our estimates are free, written, and line-itemed. Call (855) 901-7266 and we’ll walk the job with you.
Serving Redwood City, CA — Our Local Coverage Area
We’re based in the Redwood City area and know this community well, including CGI service in San Carlos. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Redwood City
Yes, in most pre-1960 raised-foundation homes, the city will require sill-plate bolting and cripple-wall bracing as part of the permit package before they sign off on a kitchen remodel. The sequence matters: retrofit gets permitted and inspected first, then the CGI cabinet and countertop install happens. We handle both pieces under the same contract, so you’re not juggling a seismic contractor and a cabinet crew. Call (855) 901-7266 and we’ll explain what your specific address triggers.
Redwood Shores sits on imported bayfill and engineered fill, and that ground moves. Differential settlement racks CGI in West Menlo Park frameless boxes out of square, so full-overlay doors and drawer fronts shift and drag within a few seasons. It’s not a defect in the cabinet. It’s the floor underneath it. We level and shim the run to the actual floor condition, and we’ll tell you if slab movement is still active enough that you should wait before replacing anything.
If the boxes are solid and square, yes. We reface with CGI OEM or equivalent doors and drawer fronts, and replace the hinges and slides at the same time. If the particleboard core has swollen from crawlspace humidity or slab moisture, or the box is already racked, refacing won’t hold. We’ll pull a single drawer and show you what’s actually happening before you spend a dollar. Call (855) 901-7266 for a straight read on your existing run.
They hold up fine as long as the drainage at the slab edge is working. The failure pattern we see in the hills is almost always water-driven: a retaining wall drain clogs, slope runoff finds the slab, and the moisture wicks into the bottom of the particleboard boxes and the quartz seams. Fix the drainage first, then the cabinets stay dry. We inspect the slab edge and the retaining wall condition as part of any hillside CGI estimate.
Cabinet installation typically runs $4,000 to $13,000, countertop installation $2,000 to $6,500, and a full kitchen remodel $14,000 to $45,000 depending on scope, stone, and what the foundation needs. A small kitchen remodel lands between $9,000 and $20,000. Redwood City’s seismic and geotech requirements can add to the base number, but we line-item all of it so you see exactly what you’re paying for. Call (855) 901-7266 for a free written estimate.
Service Areas Near Redwood City
We serve all of Redwood City plus the surrounding Peninsula: Redwood City service area covers 94061, 94063, 94064, and 94065. We also run CGI jobs in CGI service in Emerald Lake Hills, CGI service in South San Francisco, San Mateo, Burlingame, Foster City, Hillsborough, and Belmont. Same crew, same warranty, same accountability.
Book Your CGI Service in Redwood City Today
Get a written, line-itemed estimate on your Redwood City CGI cabinet, countertop, or full kitchen project. We’ll walk the site, check the foundation and the floor, and give you a number you can plan around. Call (855) 901-7266 to schedule your free estimate.
Written by Noel Carrington, Owner at San Mateo Construction, serving Redwood City and the Peninsula since day one.