Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Felton, CA | San Mateo Construction
We’re an independent Felton General Contractor crew that installs, repairs, and remodels with CGI cabinetry, countertops, vanities, and bath fixtures across Felton and the San Lorenzo Valley. We’re not authorized or sponsored by CGI, but we work with their lines every week, which means we know how the products hold up under redwood shade, slope drainage, and Chapter 7A wildfire code pressure. If you’re planning a kitchen, bath, or roof job in the 95018 and want someone who understands CGI materials and Felton’s building conditions, call (855) 901-7266 for a free estimate.
Why Felton Residents Choose Us for CGI Service
Noel Carrington, our owner, grew up pouring concrete footings with his father in San Mateo and has spent the better part of three decades working residential jobs across the county. What that means for your Felton project is simple: we plan framing, moisture control, and drainage before the first CGI cabinet box gets hung. We’re not a showroom crew. We handle the full scope, from roof repair and exterior detailing to Felton Home Remodeling and bath projects, which matters when a CGI cabinet run depends on a level subfloor and a dry crawlspace.
Tell me what you actually need, and we’ll figure out the right way to build it. That’s how Noel approaches every job regardless of brand. For you, that means an honest conversation about whether a CGI cabinet line or countertop is the right fit for a shaded, damp site, and what preparation the house needs before installation.
Styles & brands we work with
Common CGI Construction Problems We Solve in Felton
- Swollen toe-kicks and delaminating door cores. CGI cabinet boxes and MDF door cores absorb moisture from deck or pier framing that never dries under the redwood canopy. The finish fails on shaded north walls first. We correct the moisture source, then repair or replace the affected components.
- Racked doors and binding drawer glides. Pier-and-post cabins settle and twist. Out-of-level floors torque CGI frameless cabinet runs within a season, so doors rack and glides bind. We shim and sister the subfloor before reinstalling or retrofitting the cabinets.
- Moldy back panels and peeling edge banding. CGI vanities set against damp crawlspace walls wick moisture through the back panel. You get mold on the box and edge banding that lifts. We add ventilation and sealed back panels, then address the crawlspace so it doesn’t return.
- Early trim and fascia rot around CGI-supplied exterior details. Redwood debris and moss trap water at roof penetrations and gutter lines. When trim and fascia are bolted on without integrated flashing, they fail fast. We tie ember-resistant vents and flashing into the roofing system, not on top of it.
- Countertop seams opening on sloped floors. CGI quartz and granite tops need a flat, stable base. On Felton slopes where framing has settled, seams open and edges crack. We level the substrate and re-set the top with proper support.
CGI Service in Felton: What Local Conditions Mean for Your Equipment
Felton’s dense coast redwood canopy keeps framing and deck lumber damp most of the year. That means CGI cabinet and vanity installs here have to be planned around moisture control and root-driven drainage before a single box is hung. On a redwood-era cottage off Graham Hill Road, our crew opened a CGI service in Lompico-style kitchen remodel and found the pier-and-post floor out of level and the CGI cabinet bases wicking moisture from an unvented crawlspace. We sistered and shimmed the framing, added a root-barrier and drainage correction on the downhill side, then reset the CGI cabinet run with sealed back panels and ember-resistant venting to match the county’s WUI rules. The doors now swing true and the finish has held through two wet seasons. A coastal-plain contractor rarely deals with wet wood and root pressure like this; we plan for it from the first site visit.
CGI Models & Products We Service in Felton
We work with CGI Kitchen & Bath semi-custom cabinetry lines, CGI quartz and granite countertop surfaces, and CGI shower enclosures and bath fixtures. On the parts side, we source genuine CGI components where fit, finish, and warranty depend on them. For hardware, glides, and hinges, we use quality aftermarket parts when they outperform OEM at the same price. We’re honest about when a CGI cabinet run or surface can be repaired and re-sealed versus when rot or racking means replacement is the smarter spend. Local stock for fast Felton turnaround includes common hinge and glide replacements, edge banding, and sealants matched to CGI finishes.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Felton
Here’s what we quote for the most common CGI-related scopes in Felton. These are market-calibrated ranges for the San Lorenzo Valley, not national averages.
| Service | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
What drives the total: how much framing correction the floors need, whether the crawlspace requires ventilation or drainage work, and how much WUI detailing the exterior demands. A free estimate includes a site walk, a written line-item quote, and an honest recommendation on repair versus replace. Call (855) 901-7266 to schedule yours.
Serving Felton, CA — Our Local Coverage Area
We’re based in the Felton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Felton
Yes. Felton sits in the wildland-urban interface, so any exterior work tied to your kitchen or bath, like vents, flashing, and trim, must meet Chapter 7A ember-resistant standards. That often means integrating ember-resistant vents and metal flashing with the cabinet run’s exterior wall rather than installing standard building-paper details. Call (855) 901-7266 for an exact assessment of your site.
Usually, yes. Racking doors on a pier-and-post home almost always mean the subfloor has settled out of level. We shim and sister the framing to correct the plane, then re-hang the CGI cabinet run. If the cabinet boxes themselves have twisted or split at the joints, we’ll tell you straight and quote the repair or replacement honestly. Call (855) 901-7266 and we’ll take a look.
Redwood shade keeps the air and framing damp for most of the year, and the soil stays wet from root-driven drainage patterns. CGI cabinet boxes and MDF door cores absorb that moisture at the toe-kick, bottom rails, and back panels, causing swelling, mold, and delamination. Homes on the coastal plain simply dry out faster. The fix is controlling the moisture before installation, not after.
Yes, with planning. During late summer and fall, Cal Fire red-flag restrictions limit certain exterior work and hot-work operations. Interior work like a CGI vanity install and walk-in shower can proceed, but we schedule exterior-facing elements like venting and flashing around the county’s current restriction level. Call (855) 901-7266 and we’ll map out a schedule that works within the rules.
Yes. Felton’s WUI requirements mean roof repairs and replacements need ember-resistant vents and proper flashing at every penetration, including where CGI trim and fascia meet the roof plane. Debris from redwoods and oaks accumulates fast, so we detail gutters and roof edges to shed moss and needles rather than trap them. Call (855) 901-7266 for a free roof assessment.
Service Areas Near Felton
We serve Felton and the surrounding San Lorenzo Valley, including Mount Hermon, Ben Lomond, and Scotts Valley, plus the wider San Mateo area for larger remodels. For full coverage details, see our Felton service area page, or check CGI service in Mount Hermon and CGI service in Scotts Valley.
Book Your CGI Service in Felton Today
Whether it’s a full kitchen, a bathroom with a CGI vanity and walk-in shower, or a roof repair tied into your CGI service in Ben Lomond area remodel, call (855) 901-7266 to schedule your free estimate. We’re familiar with every wrinkle Felton throws at construction, and we’ll quote it straight.
Written by Noel Carrington, Owner at San Mateo Construction, serving Felton and the San Lorenzo Valley. For CGI product expertise and whole-home remodeling, see our CGI sales & service overview.