Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Abodu Construction in Daly City, CA | San Mateo Construction
San Mateo Construction provides independent Abodu construction service across Daly City and Brisbane Abodu service, and the thing that sets our work apart here is simple: we’ve set these factory-built units on cut-and-fill hillside pads, not flat suburban lots. Abodu’s Studio, One-Bedroom, and Two-Bedroom lines are well-built, but the site work, foundation interfacing, and utility connections decide whether a unit stays dry and square through years of coastal fog. Daly City’s slopes, damp air, and 1940s – 60s tract housing stock make that site work the real project. We’re a licensed general contractor, not an Abodu dealer or affiliate. Call (855) 901-7266 to talk through your site.
Why Daly City Residents Choose Us for Abodu Service
We’ve built and set Abodus on Daly City’s cut-and-fill hillside lots, so we understand how the units are assembled and what fails when a factory-built box meets coastal fog. Our crews handle the site work, foundation interfacing, and utility connections that an Abodu install actually requires – independently, with no manufacturer affiliation. Noel Carrington, our owner, studied construction technology at Skyline College and has spent the better part of three decades working residential jobs across San Mateo County. He knows what original galvanized plumbing looks like in a 1950s stucco tract home and why that matters when you’re tying in a new ADU. We stock OEM-compatible Abodu components for structural interfaces and proprietary connections, and we spec marine-grade and stainless hardware for everything the fog touches. If you’re weighing an Abodu against a stick-built ADU or garage conversion, we’ll walk you through what each option means for your specific lot. That’s the whole job, really: Abodu sales & service knowledge applied to real Daly City conditions.
Styles & brands we work with







Common Abodu Construction Problems We Solve in Daly City
- Condensation and moisture intrusion at panel seams and window penetrations. On the west-side slopes near the coast, fog is so persistent that end grain never dries. Seam sealants and standard flashing fail from the bottom up if they weren’t spec’d for marine-layer damp. We reflash the seams, open up the affected area, and replace rotted substrate with marine-grade material before buttoning it back up.
- Settlement and racking where the hillside pad wasn’t engineered for the fill. A lot of Daly City pads are cut-and-fill, and an Abodu set on under-compacted fill will rack over time – doors stop latching, panel joints open up. We grade and compact, install proper drainage, and tie the unit’s anchor system to a pad that actually holds the slope.
- Utility stub-out and tie-in conflicts at the host home. Daly City’s 1940s – 60s tract homes nearly always have original galvanized plumbing and minimal shear detailing. The Abodu’s stub-outs are straightforward; the old house’s plumbing usually isn’t. We plan the tie-in route before the unit lands, then upgrade the host-side connection so you aren’t patching leaks later.
- Wind-driven rain infiltration at roof-to-wall junctions. Inland-oriented flashing details don’t account for the way Daly City’s damp wind pushes water sideways, not just down. We reflash the roof-to-wall junction with stainless fasteners and a properly lapped membrane so the water goes where it’s supposed to.
- Deck and stair finish failure at the unit entry. This is the first thing to rot on a fog-side install. Pressure-treated lumber and box-store fasteners won’t hold up. We rebuild entry decks with marine-grade materials and stainless hardware, and we set anything that can’t shed water on a vented rain screen.
Abodu Service in Daly City: What Local Conditions Mean for Your Equipment
Daly City’s signature post-WWII tract lots often carry garages at street level with living space on the grade below. That single fact changes the tie-in plan on nearly every Abodu job here. The unit may sit in the backyard, but the sewer, water, and electrical paths from the city main have to thread past an existing under-street-level floor – through retaining walls, across old fill, around the original foundation. In the Westmoor area and similar west-side slopes, we regularly see pads that were cut into the hillside without engineered drainage, and the fog does the rest — the same conditions we address with Abodu service in Broadmoor. On a steep lot off Westmoor, our crew set an Abodu One-Bedroom on a hillside pad above a 1950s stucco tract home where the existing garage-level plumbing was original galvanized. We engineered the pad for the slope, ran stainless and marine-grade hardware on the fog-exposed entry deck, and reflashed the roof-to-wall junction, and the unit has stayed dry through two winter fog seasons. That’s the difference between an Abodu that holds up in Daly City and one that doesn’t. The unit is factory-built; the site isn’t.
Abodu Models & Products We Service in Daly City
We service all three current Abodu lines: the Studio, the One-Bedroom unit, and the Two-Bedroom unit. Our parts approach is split. For structural interfaces and proprietary connections, we source OEM Abodu components – those are the joints and brackets that keep the factory tolerances intact. For everything the fog and salt air touch, we spec in marine-grade and stainless hardware rather than whatever was originally shipped. That means replacement fasteners, flashing, and rain-screen materials hold up where the 94014, 94015, 94016, and 94017 zip codes punish standard galvanized. We keep common Abodu-compatible hardware and sealants in local stock so a small repair doesn’t turn into a long parts wait.
See the difference
Before
After
Before
After
Before
AfterAbodu Service Pricing in Daly City
What a project costs depends on what’s already on the ground: the slope, the fill, the drainage, and the condition of the host home’s utility lines. A flat-lot Abodu in better shape is a very different number than a hillside pad with retaining walls and a galvanized sewer stub. Here’s what you’re looking at:
| Project | Price Range |
|---|---|
| ADU Construction (Abodu included) | $90,000 – $220,000 |
| Home Addition | $45,000 – $130,000 |
| Roof Repair | $400 – $1,800 |
Your free estimate includes an on-site look at grade, drainage, access, and host-home tie-ins. We give you a written line-item quote before you decide anything. Call (855) 901-7266 to schedule it.
Serving Daly City, CA — Our Local Coverage Area
We’re based in the Daly City area and know this community well, including nearby Abodu in Colma. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Abodu Construction in Daly City
Yes, but only if the pad is engineered for the slope and the fill. We routinely grade, compact, and install retaining and drainage measures before the unit lands. A unit set on under-compacted fill will rack, and the panel joints will open up within a few fog seasons. Call (855) 901-7266 and we’ll look at your specific grade.
We plan the tie-in route before the unit arrives, because the original galvanized plumbing and minimal shear detailing in those homes usually need upgrading at the host side — a process similar to our Abodu service in Visitacion Valley. Sewer, water, and electrical paths through street-level garages and below-grade living space are the norm here. We handle the full connection scope under one contract.
Because the marine fog keeps end grain and standard fasteners perpetually damp, so finishes fail from the bottom up. On west-side slopes the deck and stair entry are almost always the first components to rot. We rebuild them with marine-grade materials, stainless fasteners, and vented rain screens where the conditions call for it. For an exact fix, call (855) 901-7266.
ADU construction with an Abodu unit typically runs $90,000 – $220,000 depending on site conditions, slope work, and utility upgrades. Hillside pads, retaining walls, and galvanized pipe replacement all move the number. We give a free, line-item written estimate before you commit – call (855) 901-7266.
Yes. Daly City’s wind-driven rain hits roof-to-wall junctions sideways, not just from above, and standard inland flashing details don’t hold up. We reflash those junctions with properly lapped membrane and stainless hardware, and we check the roof-to-wall seals as part of regular maintenance on fog-side units.
Service Areas Near Daly City
We serve Daly City proper plus the surrounding peninsula communities: San Mateo, Burlingame, Highlands-Baywood Park, Foster City, Hillsborough, and Belmont. If you’re looking for Abodu service in Stanford or Abodu service in Palo Alto, we handle those areas too. For a full look at where we work, see the Daly City service area page.
Book Your Abodu Service in Daly City Today
Tell me what you actually need, and we’ll figure out the right way to build it. Call (855) 901-7266 for a free on-site estimate. We’ll look at your grade, your utilities, and your fog exposure, and give you a written number before you agree to anything.
Written by Noel Carrington, Owner at San Mateo Construction, serving Daly City and the surrounding peninsula.