Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Lexington Hills, CA | San Mateo Construction
We provide independent Dvele construction service across Lexington Hills, CA (ZIP 95031), handling everything from panelized wall repairs to full ADU builds on steep, wooded lots. What sets our Dvele work apart here is straightforward: we know how Dvele’s panel joints, shear brackets, and roof cassettes actually hold up in this specific terrain, where fire-safe detailing and storm exposure create challenges most contractors never see. If you own a Dvele home in Lexington Hills or are planning a Dvele addition, call (855) 901-7266 and we’ll tell you what’s actually involved before anyone picks up a tool.
Why Lexington Hills Residents Choose Us for Dvele Service
Most general contractors have never touched a Dvele panelized system. They’ll treat it like a stick-built house and miss the things that actually fail. We’ve built with Dvele’s Q-Series, L-Series, and custom panelized wall and floor systems, so we know where the manufacturer’s standard detailing runs into trouble on high-fire-severity mountain lots. Noel Carrington, our owner, grew up pouring concrete footings in San Mateo County and spent three decades on residential and light commercial jobs before San Mateo Construction took on Dvele in Los Gatos and nearby communities like Lexington Hills. His take on it: “Tell me what you actually need, and we’ll figure out the right way to build it.” That’s how we approach every Dvele repair, remodel, or addition here.
We’re also local to Lexington Hills. We don’t need to study a map to know which private roads off Old Santa Cruz Highway will block a concrete truck or where the county wants to see defensible-space clearance on a site plan. That familiarity keeps inspections moving and keeps your project from stalling in plan review. Whether you’re repairing storm damage on an existing Dvele home or planning a Dvele ADU, Dvele sales & service is what we do, and Lexington Hills is where we do it well.
Styles & brands we work with
Common Dvele Construction Problems We Solve in Lexington Hills
- Panel joint weather-barrier tape failure. After winter storms saturate slopes and drive wind against uphill walls, Dvele’s taped sheathing seams can lift or delaminate, letting moisture sit behind the barrier. We strip the failed tape, inspect the sheathing, and re-seal with genuine Dvele weather-barrier components before moisture becomes rot.
- Steel connector corrosion on shear brackets. Lexington Hills sits in a high-fire-severity zone where ember exposure and wet-dry cycles work against metal connectors year after year. We see accelerated oxidation on Dvele shear brackets, especially on homes with heavy tree canopy holding dampness against the walls. We replace with corrosion-rated fasteners and verify the shear path is intact.
- Roof cassette drip-edge and fascia separation. Mountain storms bring real wind uplift, and Dvele roof cassettes can separate at the perimeter attachments. We re-secure fascia, replace drip-edge where it’s compromised, and check the roof tie-in before water gets a path under the assembly.
- Deck ledger connections that don’t meet fire-safe detailing. The county requires upgraded standoffs and flashing where a deck ledger hits a panelized wall. We’ve fixed enough non-compliant Dvele deck connections in Lexington Hills to know what inspectors will flag, and we correct it before final sign-off.
- Moisture intrusion behind ember-resistant venting. Standard Dvele perimeter closure strips don’t always stand up to Lexington Hills’ specific combination of wildfire ember exposure and wet winters. We upgrade to ember-resistant closure strips and re-detail the venting so your wall assembly stays dry and code-compliant.
Dvele Service in Lexington Hills: What Local Conditions Mean for Your Equipment
Here’s something most Dvele information misses. Lexington Hills is unincorporated Santa Cruz Mountains territory, and Santa Clara County plan review will stall your Dvele project if the site plan doesn’t show both the 100-foot defensible-space zone and the approved expansion area for your septic system. That’s not a suggestion, it’s the reality of building here. For a Dvele panelized home, this means your panel joints and roof cassettes need to be detailed and flashed to meet fire-safe construction requirements from day one, often requiring upgrades to standard Dvele perimeter closure strips and ember-resistant venting before final inspection. If you’re on a steep, wooded lot off Old Santa Cruz Highway, you may also be dealing with a narrow private road that a concrete truck can’t climb, forcing a pump-truck or smaller-mix delivery for any foundation work. We factor all of that into the estimate up front, because finding it out at inspection time costs weeks and money. That’s the kind of local knowledge that keeps a Dvele project in Lexington Hills on schedule.
We saw exactly this on a recent job off Old Santa Cruz Highway. A Dvele Q-Series home had winter storms lift the roof cassette fascia and soak the taped panel joints along the uphill wall. We replaced the failed weather-barrier tape with Dvele OEM flashing and ember-resistant closure strips, re-secured the shear brackets with corrosion-rated fasteners, and brought the deck ledger standoffs up to fire-safe detail for county sign-off. On the same project, we coordinated the concrete delivery around the road access limits so the foundation work never stalled. That’s Dvele service in Lexington Hills done the local way, and you can read more about how we approach the broader area on our Lexington Hills service area page.
Dvele Models & Products We Service in Lexington Hills
We work on the full Dvele lineup: Q-Series modular homes, L-Series luxury modular homes, custom panelized wall and floor systems, and the roof cassettes and pre-engineered shear walls that tie it all together. When a warranty-critical assembly is involved, we source genuine Dvele connectors and weather-barrier components. When the OEM part is back-ordered, we use tested third-party structural screws and flashing that equal or exceed the spec. We don’t guess, and we don’t substitute something cheaper just to close the job. On older Dvele panels with localized damage, we repair rather than replace entire assemblies whenever the water barrier and shear path can be restored, which saves Dvele owners in Lexington Hills thousands and keeps the original panel configuration intact.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Lexington Hills
Pricing for Dvele work in Lexington Hills depends on what you’re doing. Roof replacements on Dvele homes run $8,000 to $20,000 depending on the cassette condition and how much perimeter flashing needs re-detailing. Home additions start around $45,000 and can reach $130,000 when the design includes full panelized wall integration and fire-safe upgrades. ADU construction through Dvele’s panelized system typically runs $90,000 to $220,000, with the final number driven by site access, foundation type on steep slopes, and septic expansion requirements.
| Dvele Service | Typical Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
Every estimate includes a walk-through of the Dvele assembly, a written line-item quote, and a straight answer about what Santa Clara County will ask for on your specific site. Call (855) 901-7266 for an exact number on your project. The estimate costs you nothing, and you’ll know exactly what drives the price before you decide anything.
Serving Lexington Hills, CA — Our Local Coverage Area
We’re based in the Lexington Hills area and know this community well, and we also provide Dvele repair in Monte Sereno. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Lexington Hills
Yes, it does. Because Lexington Hills sits in a high-fire-severity zone, Santa Clara County requires that Dvele panel joints and roof cassettes be detailed and flashed to meet fire-safe standards for the 100-foot defensible-space zone. That typically means upgrading standard perimeter closure strips and adding ember-resistant venting before final inspection. We handle those upgrades as part of any Dvele build or major repair here. Call (855) 901-7266 for a free estimate that includes the fire-safe detailing line items, not surprises after the permit comes back.
Yes, but it requires planning that a flat suburban lot doesn’t. Steep grades on lots off Old Santa Cruz Highway and similar roads in Lexington Hills often mean a concrete truck can’t reach the site, so we plan for pump-truck or smaller-mix deliveries from the start. We also have to show both the 100-foot defensible-space zone and the septic system’s approved expansion area on the site plan before the county will approve the project. We handle that paperwork and logistics for you.
We start by re-securing the fascia and drip-edge at the perimeter attachments where wind uplift stressed the assembly, then inspect the taped panel joints along any exposed hillside wall for moisture intrusion. We replace failed weather-barrier tape with Dvele OEM flashing, re-secure shear brackets with corrosion-rated fasteners, and upgrade closure strips to ember-resistant versions where required. The goal is a repair that passes inspection the first time and holds through the next winter storm.
For older Dvele homes in Lexington Hills, a deck or addition means checking the existing deck ledger connections against current fire-safe detailing requirements. Many older Dvele ledger connections don’t meet today’s Santa Clara County standoff and flashing standards, so we upgrade them before adding any new structure. We also verify that the existing panelized wall assembly can handle the new shear loads, then tie the addition in using Dvele-compatible connectors so the whole assembly moves as one system.
No, we’re not authorized or endorsed by Dvele. We’re an independent Dvele service provider. That means we can repair, upgrade, and build with Dvele panelized systems without being bound to manufacturer pricing or service territory. It also means we’re free to recommend the best fix for your home, whether that’s a genuine Dvele part or a tested third-party alternative where the OEM part is back-ordered. Call (855) 901-7266 and we’ll give you our honest read on what your Dvele home actually needs.
Service Areas Near Lexington Hills
We work on Dvele projects across Lexington Hills and the surrounding Santa Cruz Mountains communities. If you’re in Dvele service in Brookdale or up the road in Dvele service in Lompico, we’ve already handled Dvele panelized work in both towns and know the local fire-safe requirements. We also serve San Mateo, Burlingame, Highlands-Baywood Park, Foster City, Hillsborough, and Belmont for Dvele owners whose mountain homes need attention from a crew that understands the system.
Book Your Dvele Service in Lexington Hills Today
If you own a Dvele home in Lexington Hills or you’re planning a Dvele build on a mountain lot, call us at (855) 901-7266 for a free estimate. We’ll walk your site, look at what the county will require, and give you a straight number for the work.
Written by Noel Carrington, Owner at San Mateo Construction, serving Lexington Hills, Dvele service in Scotts Valley, and the surrounding Santa Cruz Mountains with independent Dvele construction service.