Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Mission District, CA | San Mateo Construction
We provide independent Unilock paver and wall construction across Mission District, handling everything from Brussels Block driveways to Yorkville patios and Onyx walkways, and we also offer Chinatown Unilock service for nearby neighborhoods. What sets our Unilock work here apart is simple: we plan for what’s under the surface. The Mission’s soft-story retrofit cycle means nearly every job we start uncovers the same century-old brick foundations and clay lateral trenches that the retrofit crews are chasing, and we build our Unilock installs to hold through that discovery. Call (855) 901-7266 for a free estimate on any Unilock project in the 94110.
Why Mission District Residents Choose Us for Unilock Service
We’ve set Unilock product through hundreds of Bay Area yards, and we’re fluent in the compaction specs, base depths, and polymeric-sand practices Unilock’s own installation guidelines demand. As an independent contractor, we’re not authorized, sponsored, or warranted by Unilock. But we know their product families cold, and we install them to spec because we’ve seen what happens when someone doesn’t.
Noel Carrington, our owner, grew up pouring concrete footings in San Mateo County and has spent three decades working residential and light commercial jobs across the Bay Area. His crews have lifted and re-based more failed paver fields than we care to count. In Mission District, the difference comes down to planning for what the retrofit ordinance keeps exposing, unlike areas where Unilock in Visitacion Valley faces different soil challenges. We don’t just lay pavers; we account for the old brick, the clay laterals, and the zero-lot-line realities before we ever compact the first lift.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Mission District
- Efflorescence and salt bloom on Brussels Block and Beacon Hill faces. This shows up as a white haze when the base doesn’t drain. In the Mission, it’s common when pavers are laid tight against a Victorian’s old brick foundation and water wicks up through the setting bed. We fix the drainage, not just the surface stain.
- Joint sand washout and paver migration. When the base is compacted over a century-old clay sewer lateral trench or an unreinforced masonry footing that keeps settling, the surface heaves and the soldier course separates. We lift the affected run, re-base it properly, and reset with Unilock-spec joint sand.
- Edge restraint failure at zero-lot-line property lines. Many Mission District homes have no room for proper spike depth against a neighbor’s wall, so the outer row creeps and the pattern racks. We use Unilock edge restraints anchored into firmer native soils wherever possible.
- Staining and algae on lighter Onyx and Yorkville tones. The Mission’s fog-free sunny microclimate accelerates algae growth, especially where a downspout from a remodeled flat roof dumps onto the paver apron. We address the drainage path and reset affected pavers.
- Heaved driveways from soft-story work. When retrofit crews open the ground floor of a multi-unit Victorian, the driveway apron often shifts. We see this on a regular basis and re-base the affected section rather than tear out the whole field.
Unilock Service in Mission District: What Local Conditions Mean for Your Equipment
Here’s what no generic paver page will tell you: the Mission’s mandatory soft-story retrofit ordinance means multi-unit Victorians along the 94110 corridor are constantly having their ground floors opened up. Our Unilock patio and driveway work routinely uncovers the same original brick foundations and clay laterals the retrofit crews are chasing. So we plan for a discovery stop before we ever set base. On a two-flat Edwardian off Valencia we tore out a cracked concrete apron and set a Brussels Block driveway, and once we excavated we found the original brick foundation underpinning the front stoop sitting higher than the neighboring lot grade. We stepped the base down in lifts, added a drainage channel against the brick, and reset the soldier course with Unilock edge restraint spiked into the firmer native soils so the pavers held through the winter rains. That’s the kind of thing you only learn by working the Mission block by block – and it’s why we don’t skip the discovery step.
Unilock Models & Products We Service in Mission District
We work with the full Unilock product families you’re most likely to see on Mission District homes: Brussels Block for driveways and front aprons, Beacon Hill for tighter urban lots, Onyx for clean modern patios, and Yorkville for larger backyard pads. We use genuine Unilock pavers and Unilock-spec edge restraints and polymeric joint sand rather than off-brand substitutes. Color lots and dimensional tolerances only match within a single manufacturer, and we won’t gamble with what you’ll look at every day. For Mission District turnaround, we keep common Unilock accessories on hand and order specific color lots directly for each project so the blend is right.
We also bring Unilock sales & service knowledge that goes beyond just laying pavers. From base preparation to edge restraint to joint sand, the entire system gets addressed, not just the surface.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Mission District
Pricing for Unilock work in Mission District depends on base conditions, access, and the size of the field. Here’s what you can expect:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
What drives cost here specifically is the unknown: an old brick foundation, a clay lateral trench that never got properly compacted, a zero-lot-line edge that needs a creative anchor. A free estimate from us includes an on-site look at your base conditions, because that’s the only way to give you a number that won’t change once we start digging. Call (855) 901-7266 to schedule yours.
Serving Mission District, CA — Our Local Coverage Area
We’re based in the Mission District area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Mission District
Yes, but not directly on top of the brick. The original brick foundations under Mission District Victorians and Edwardians wick moisture and settle unevenly, so we step the base down in lifts, add a drainage channel against the brick face, and set Unilock edge restraint into the firmer native soils beyond the foundation line. The pavers then ride on a properly compacted base instead of the old masonry. Call (855) 901-7266 and we’ll take a look at yours.
That white haze is efflorescence – mineral salts wicking up through the setting bed when the base doesn’t drain. In the Mission, it’s almost always tied to pavers laid tight against an old brick foundation or a clay lateral trench that holds water. We fix it by correcting the drainage path and re-setting the affected pavers. Call (855) 901-7266 for a free assessment.
A Unilock paver driveway in Mission District typically runs $7,000 to $18,000, depending on the size, base conditions, and access. Zero-lot-line properties and old foundation discoveries tend to push toward the higher end. Call (855) 901-7266 and we’ll give you an exact line-item quote.
Usually not for a patio at grade, but it depends on how the Mission’s planning department interprets your specific lot. If the patio abuts a retaining wall or involves slope work, a permit may kick in. We pull permits when they’re required and handle the paperwork. Call (855) 901-7266 and we’ll tell you what applies to your property.
Yes, when they’re installed on a properly compacted base with proper joint sand and drainage. The Mission’s fog-free summers actually help with paver longevity by reducing moss and algae compared to wetter parts of the city. But the winter rains will expose any base failure quickly, so the installation quality matters more than the weather. Call (855) 901-7266 to schedule a free estimate.
Service Areas Near Mission District
We serve Mission District and the surrounding communities across San Mateo County. That includes San Mateo, Burlingame, Highlands-Baywood Park, Foster City, Hillsborough, and Belmont. For more detail, see our Mission District service area page. If you’re up the Peninsula, we also offer Unilock service in San Francisco and Unilock service in Los Altos Hills.
Book Your Unilock Service in Mission District Today
Tell me what you actually need, and we’ll figure out the right way to build it. Call (855) 901-7266 to schedule your free Unilock estimate in Mission District. We’ll walk your property, check the base conditions, and give you a written quote before any work begins.
Written by Noel Carrington, Owner at San Mateo Construction, serving Mission District and the Bay Area with Unilock construction services.