Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Stanford, CA | San Mateo Construction
We install and repair Unilock paver systems across Stanford, from Brussels Block patios to Town Hall driveways and Pisa2 retaining walls. We also provide Unilock service in Los Altos and nearby communities. We’re an independent contractor, not a manufacturer program, so our recommendations are based on what actually holds up in Stanford’s clay soil and wet winters. The work we do around campus also has to respect the university’s planning calendar and historic-review standards, which shapes material choices and scheduling. Call (855) 901-7266 for a free estimate on any Unilock project in the 94305 ZIP.
Why Stanford Residents Choose Us for Unilock Service
Unilock pavers behave differently depending on the subgrade, the slope, and how water moves across a property. Stanford has all three in play. We’ve torn out enough failed paver bases on sloped lots near campus to know that the difference between a patio that lasts fifteen years and one that heaves after two winters is usually in the base preparation, not the paver itself. We carry genuine Unilock units and matching edge restraints, so when we add to an existing field or repair a section, the color lot and stone height line up. Noel Carrington, who owns San Mateo Construction, has spent decades working residential and light commercial jobs across San Mateo County, and he treats Unilock work the same way he treats any trade: get the subgrade right first, then lay the finish. Unilock sales & service is one part of how we help, but we don’t push a product line that doesn’t fit the site.
Styles & brands we work with







Common Unilock Construction Problems We Solve in Stanford
- Efflorescence on Brussels Block and Beacon Hill Flagstone. White salt bloom shows up after Stanford’s wet winters when the base below the pavers doesn’t drain well and moisture wicks up through the concrete. It’s usually cosmetic, but persistent efflorescence points to water trapped in the bedding layer. We fix the drainage, not just the stain.
- Joint sand washout and edge creep on sloped lots. When surface water sheets off a patio or walkway toward the house, it carries sand out of the joints and loosens the edge restraint. On Stanford hillside properties this gets worse every rainy season. We reset the edge, re-sand, and often add a concrete-cored restraint so the field stops migrating.
- Polymeric joint failure on Town Hall permeable installs. Permeable pavers only work if the open-graded base was compacted in proper lifts. Too thick a lift, and the base settles unevenly, joints crack, and the whole field dips. We see this on older Stanford installs where someone cut corners on compaction time.
- Frost and root heave on Pisa2 and Rivercrest wall units. On hillside terraces near campus, oak roots and expanding clay push against the back of retaining walls. The concrete lip on wall units cracks, and backfill soil starts bleeding out through the open joints. We rebuild the wall section, add filter fabric and clean drainage stone, and reset the battered profile so it doesn’t happen again.
- Settlement across entire paver fields. Stanford’s clay-heavy soil expands and contracts with moisture. If the original install didn’t remove enough organic material or used too thin a base, the whole field settles unevenly. Patching a few pavers won’t fix a bad subgrade. We say so, and we quote the rebuild honestly.
Unilock Service in Stanford: What Local Conditions Mean for Your Equipment
Exterior work in the 94305 ZIP runs on the academic calendar. Noisy cutting, grinding, and plate compaction have to be scheduled outside finals and major campus events, and that’s not a suggestion from the university planning office, it’s a requirement. The historic core around the Main Quad is also subject to the Secretary of the Interior’s Standards for Rehabilitation, which means paver hardscape near sandstone and terra cotta buildings has to read as sympathetic to the historic fabric rather than as a modern contrast. In practice, that pushes our Unilock layouts toward muted Brussels Block and Beacon Hill tones with tighter, hand-set detailing instead of high-contrast slab patterns. A Town Hall patio in bold charcoal that might work in a new Palo Alto development would get flagged in Stanford’s historic overlay. We specify accordingly, and we file the paperwork that goes with it. This also affects timing: a Unilock paver driveway or patio replacement near a dorm or academic building might need a noise variance or a summer-window schedule. We coordinate that so the homeowner doesn’t have to chase down a campus project manager.
We had a faculty-housing project off Campus Drive East where a winter-rained Town Hall walk and patio had settled into a low spot that pooled water against the slab edge. We pulled the affected field, re-graded to a positive slope away from the house, rebuilt the open-graded base in proper lifts, and re-laid the Town Hall units with new edge restraint and fresh joint sand. The homeowner got a hardscape that drains before the next wet season instead of a repeat puddle. That’s the kind of fix that only works if you understand both Unilock’s base requirements and Stanford’s drainage patterns.
Unilock Models & Products We Service in Stanford
We work with the Unilock product families most common on Stanford properties. Brussels Block is a tumbled concrete paver that reads well on older homes and historic adjacent sites. Town Hall comes in standard and permeable versions, both popular for driveways and walkways. Beacon Hill Flagstone gives the look of natural stone without the price. Pisa2 and Rivercrest wall block handle terraced yards and raised planting beds. For repairs, we source genuine Unilock units and matching edge restraints so color lots, heights, and surface texture line up with the existing field. We don’t substitute a different paver into a visible run just to save a few dollars. If a base or drainage failure is localized, we reset and re-sand that section. If settlement runs through the whole field, we tell you and quote the rebuild. That’s the honest way to do it, and it’s the only way that lasts.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Stanford
Pricing for Unilock work in Stanford depends on access, existing base conditions, and whether we’re repairing or rebuilding. Here are the ranges we quote for the most common projects:
| Service | Typical Range |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
What drives the final number? Whether we’re repairing a section or rebuilding the full field, how much base remediation the site needs, and whether campus scheduling constraints require phased work. A free estimate from San Mateo Construction includes a written line-item quote, so you’ll know exactly what you’re paying for before we start. Call (855) 901-7266 to schedule one.
Serving Stanford, CA — Our Local Coverage Area
We’re based in the Stanford area and know this community well, and we offer Unilock in Los Altos Hills too. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Stanford
No. San Mateo Construction is an independent Stanford General Contractor with extensive Unilock installation and repair experience across Stanford and San Mateo County. We’re not manufacturer-affiliated, which means our recommendations aren’t tied to a dealer program. We specify Unilock when it’s the right fit for the site, and we source genuine Unilock units for every repair.
Yes. We order genuine Unilock units in the same color lot and product line as your existing field, and we match edge restraints so heights and joint lines align. Unilock’s color lots shift slightly from year to year, so we’ll sample against the existing pavers before the full order goes in. For a match on an existing Stanford patio or driveway, call (855) 901-7266 and we’ll take a look.
Most paver repairs, from edge-course resets to localized base remediation, take one to three days once materials arrive and weather allows. Full driveway or patio replacements run longer, typically one to two weeks depending on access and scope. On Stanford properties near campus, scheduling around the academic calendar can add lead time. We’ll give you a written schedule before work starts.
We install and repair Brussels Block, Town Hall (standard and permeable), Beacon Hill Flagstone, Pisa2, and Rivercrest wall block, which covers the vast majority of Unilock hardscape on Stanford properties. If you have a different Unilock line, call us and we’ll source matching units or recommend an equivalent from the current catalog.
Repair pricing varies by scope: sealing runs $250 to $700, driveway replacement ranges from $5,000 to $14,000, and full paver patio installation runs $3,500 to $11,000. Localized repairs like edge resets and section re-leveling are quoted by the job after we assess the base. Call (855) 901-7266 for a free, line-item estimate.
Service Areas Near Stanford
We serve Stanford and the surrounding Peninsula communities including San Mateo, Burlingame, Highlands-Baywood Park, Foster City, Hillsborough, and Belmont. For specifics on nearby coverage, see Stanford service area. We also provide Unilock service in Palo Alto and Unilock service in Ladera.
Book Your Unilock Service in Stanford Today
If your Unilock patio, driveway, or retaining wall needs attention before the next rainy season, call (855) 901-7266 to schedule a free estimate. We also offer Unilock service in West Menlo Park for homeowners in that area. We’ll assess the base, the drainage, and the existing field, and give you a written quote with no pressure. Tell us what you actually need, and we’ll figure out the right way to build it.
Written by Noel Carrington, Owner at San Mateo Construction, serving Stanford and the San Mateo County Peninsula.