Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Broadmoor, CA | San Mateo Construction
San Mateo Construction provides independent Jerith fence and railing service across Broadmoor’s stucco tract neighborhoods, from full aluminum fence installations to gate repairs on narrow side yards. We’re an independent Jerith service provider – not manufacturer-affiliated or authorized – and we run every Broadmoor project through San Mateo County permitting rather than a city building department, because that’s how unincorporated Broadmoor works. If your Jerith fence has chalked-out powder-coat or a sagging gate off the county line, call (855) 901-7266.
Why Broadmoor Residents Choose Us for Jerith Service
Noel Carrington grew up in San Mateo County and has spent the better part of three decades on residential and light commercial jobs across the county. He studied construction technology at Skyline College in San Bruno and built his reputation on clean permit packages and tight framing before running San Mateo Construction. When we take on a Jerith project in Broadmoor, we bring all of that – plus a working knowledge of how county inspectors look at fence and gate placements on packed lots.
We know Jerith’s Patriot, Provincial, and Regency picket profiles, understand the powder-coat finish spec, and keep genuine OEM posts, panels, caps, and brackets on order for fast turnaround. On Broadmoor’s damp, foggy lots, swapping in aftermarket stainless fasteners where the stock hardware would corrode makes a real difference. Tell me what you actually need, and we’ll figure out the right way to build it. We service everything from a single gate post to a full perimeter fence, and we stand behind our work.
Styles & brands we work with







Common Jerith Construction Problems We Solve in Broadmoor
- Powder-coat chalking and dulling. Broadmoor sits on a wind-exposed slope near San Bruno Mountain, and the west-facing fence runs take steady onshore wind with damp marine fog holding moisture against the finish. We see Jerith panels turn chalky and dull on those exposures, and we sand, prep, and touch up or replace the affected sections with matching OEM finish.
- Galvanic and crevice corrosion at post bases. Set into damp stucco or against concrete footings on narrow side yards with poor drainage, Jerith post bases and bracket fasteners corrode faster than they should. We pull the bad hardware, clean the seating, and reset with stainless fasteners that outlast stock hardware in wet coastal air.
- Gate sag and racking from shallow-set posts. When footings get squeezed into tight lot lines, posts don’t always get set deep enough. We see gates drift and racks go out of square, especially on the narrow lots packed against each other. We reset posts to the county-approved line and rehang gates so they swing clear.
- Bent and scraped panels from close-quarters staging. Delivering and staging materials on Broadmoor’s narrow streets means trucks and equipment run close to existing fence lines. Panels get bent or scraped. We replace damaged sections and keep the profile matched to the original run.
- Post rot at the base of older Jerith runs. The classic post-WWII stucco tract homes in Broadmoor often have original fence lines that predate current drainage thinking. Water pools at post bases after fog cycles, and the posts corrode from the bottom up. If the post section is eaten through, we recommend replacement – otherwise we repair.
Jerith Service in Broadmoor: What Local Conditions Mean for Your Equipment
Broadmoor is one of those places where the jurisdiction is easy to misread. It’s a San Mateo County unincorporated enclave (ZIP 94015), fully surrounded by Daly City, but Daly City’s building department has no authority here. Every Jerith fence or railing project runs through San Mateo County. That means county setback and fire-separation rules apply, and on Broadmoor’s tightly packed tract lots – many built in the 1940s through the 1960s – side-yard fence lines get reviewed against the county line, not simply where the old fence happened to sit. We’ve had projects where the existing fence was a foot or more off the property line, and the county required us to set the new Jerith run correctly. Staging panels and equipment on those narrow streets isn’t simple either; we plan material drops and parking so we don’t block a neighbor’s driveway or force the inspector to walk through a mess. The county schedules inspections on its own timeline, so we sequence our Broadmoor work to stay ahead of those dates.
Jerith Models & Products We Service in Broadmoor
We install and repair the full Jerith residential range: the Patriot aluminum ornamental fence in its standard picket profiles, the Provincial and Regency fence styles, Jerith aluminum railing systems for porches and stairs, and the vinyl and privacy fence lines. On parts, we favor genuine Jerith OEM panels, posts, caps, and proprietary brackets so the finishes, profiles, and any remaining warranty stay consistent. Where the stock hardware is the weak link – typically the fasteners and post brackets in Broadmoor’s wet coastal air – we spec quality aftermarket stainless so the repair outlasts what was there before.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Broadmoor
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Roof Repair | $400 – $1,800 |
Your Jerith fence or railing quote in Broadmoor depends on run length, post depth and footing condition, whether we’re pulling a permit through San Mateo County, and how much of the existing hardware needs replacing. A repair on a sagging gate might be a few hundred dollars; a full perimeter aluminum fence on a typical Broadmoor lot falls in the $4,000 – $10,000 range. A free estimate includes the site walk, measurements, and a written line-item scope. Call (855) 901-7266 to schedule one.
Serving Broadmoor, CA — Our Local Coverage Area
We’re based in the Broadmoor area and know this community well, and we also offer Jerith repair in Colma. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Broadmoor
Do Jerith aluminum fence and railing projects in Broadmoor need San Mateo County permits?
Yes. Because Broadmoor is unincorporated San Mateo County, fence and railing projects are permitted through the county, not a city building department. We pull the permits, schedule the inspections, and set your Jerith posts to the county-approved property line. Call (855) 901-7266 and we’ll walk you through exactly what your project needs.
Will Jerith’s powder-coat finish survive Broadmoor’s fog and onshore wind?
Jerith’s powder-coat is a quality finish, but Broadmoor’s wind-driven moisture is tough on west-facing runs. We see chalking and dulling faster here than on inland sites. The answer is proper prep, matched OEM finish touch-ups, and stainless fasteners where the hardware would corrode. Call (855) 901-7266 for a free condition check on your existing run.
My Jerith gate sags and the post wobbles – repair or replace?
Usually repair. A sagging gate with a wobbling post is typically a shallow or corroded post base, not a full fence failure. We reset the post on a properly drained footing to the county line, rehang the gate, and check the rack. We only recommend full replacement when corrosion has eaten the post section or the run no longer meets county setback and fire-separation lines. Call (855) 901-7266 and we’ll tell you which one you have.
Can a Jerith railing or fence anchor a garage conversion or ADU in Broadmoor?
Yes. We’ve used Jerith railings and fence runs on garage conversion and ADU projects in Broadmoor. The key is pulling everything through San Mateo County permitting and positioning the railing or fence to meet county setback and fire-separation rules, which are tighter on these packed lots. Call (855) 901-7266 to discuss your scope.
How do you stage Jerith panels on Broadmoor’s narrow streets?
We plan each drop. We deliver panels in staged batches, park equipment without blocking driveways, and keep the work area clear for the county inspector. Tight streets and small lots are normal in Broadmoor, and a little logistics planning keeps the project moving. Call (855) 901-7266 and we’ll walk your site before we quote.
Service Areas Near Broadmoor
We run Jerith fence and railing work throughout the mid-Peninsula. If you’re in Jerith service in Daly City, we’re familiar with those neighborhood streets. We also serve Jerith service in Stanford, San Mateo, Burlingame, Highlands-Baywood Park, Foster City, Hillsborough, and Belmont. See our Broadmoor service area page for full coverage.
Book Your Jerith Service in Broadmoor Today
Call (855) 901-7266 to schedule your free Jerith fence or railing estimate in Broadmoor. We’ll walk your lot, check the current run, and give you a written line-item quote. For more on our full Jerith capabilities, see Jerith sales & service.
Written by Noel Carrington, Owner at San Mateo Construction, serving Broadmoor and the San Mateo Peninsula since 1989.