Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Colma, CA | San Mateo Construction
We’re San Mateo Construction, an independent general contractor that installs and repairs Jerith fencing throughout Colma, California. We are not Jerith authorized or manufacturer-affiliated – we’re a local crew that sources genuine Jerith components directly and stands behind our own work. The one thing that makes our Jerith service different here is the ground itself: Colma’s saturated, fog-belt soils and cemetery-district boundaries change how a fence post needs to be set, drained, and maintained. Call (855) 901-7266 for a free estimate.
Why Colma Residents Choose Us for Jerith Service
Most fence contractors in this area treat Jerith like any other vinyl or aluminum product. We don’t, because we’ve pulled too many leaning posts out of Colma’s flat, moist ground to think that way. Noel Carrington, our owner, grew up in Baywood and spent weekends as a kid pouring concrete footings with his father – before studying construction technology at Skyline College and spending three decades on residential and light commercial jobs across San Mateo County. He’s the one who’ll walk your property line, look at the drainage, and tell you honestly whether a repair makes sense or a full run needs replacing.
We carry genuine Jerith extrusions, caps, and brackets for color match and structural integrity. For hardware, we swap stock fasteners for stainless where the fog demands it. That combination – factory parts where they matter, better hardware where the coast requires it – keeps your fence standing straight and looking right through Colma’s dampest stretches.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Colma
- Leaning post footings in saturated soil. Colma sits flat and low, and winter rains saturate the ground fast. Posts set too shallow or without gravel drainage at the base end up leaning and racking by spring. We reset them on deeper, drained footings so the freeze-thaw and wet-dry cycle leaves them alone.
- Chalky white bloom and moss film on vinyl. Persistent fog keeps vinyl rails and pickets damp for weeks at a time. That drives efflorescence-like chalk and green moss, especially on north-facing runs that never see direct sun. We clean, treat, and where needed swap in new genuine Jerith pickets so the fence doesn’t look ten years older than it is.
- Rust staining around aluminum hardware and picket screws. Fog-driven moisture creeps into unsealed post caps and routed rail channels, then sits against steel screws and aluminum hardware. The result is rust bleed you can see on white rails. We reseal and convert to stainless fasteners that don’t streak.
- Slick algae on shaded panels. Runs along the north side of a home or backing a mausoleum wall get almost zero sunlight. Vinyl that never dries grows a slick film that makes latches and hinges work harder. We address drainage, airflow, and hardware clearance so the gate swings like it should.
- Heaved fence lines along cemetery-district boundaries. When Jerith fencing separates perpetual-care grounds from a neighboring parcel, footing failures affect both sides. We coordinate with cemetery associations to keep gate widths, sightlines, and post locations aligned with their interment-related permitting – not some generic HOA checklist.
Jerith Service in Colma: What Local Conditions Mean for Your Equipment
Colma is a cemetery town. Seventeen cemeteries hold over a million burials, and roughly 1,500 living residents live above ground. That reality shapes fencing work here in a way no neighboring city experiences. Much of the Jerith fencing we service in Colma runs along cemetery-district boundaries and perimeter lines – separating perpetual-care grounds from adjacent parcels, or defining maintenance yards near columbaria and mausoleum walls. A standard fence quote doesn’t cover that. We’re coordinating gate widths for grounds crews and interment vehicles, respecting sightlines the association cares about, and setting footings where the ground stays wetter than a Daly City Jerith service backyard ever would. That’s the difference between a contractor who works in Colma and one who happens to have it on their service map.
Fog is the constant here. It rolls in off the Pacifica Jerith service coast and sits in the flat basin, keeping vinyl damp, promoting moss, and rusting hardware that would last decades in drier inland air. The water table is close. Drainage is slow. A fence installed without thinking about those two things will lean within two winters. We design for it from the first post hole.
Jerith Models & Products We Service in Colma
We work on the full Jerith lineup you’ll see around Colma and the fog belt. That includes the Patriot vinyl picket fence – the classic white residential run – plus the aluminum ornamental fence with its Grandview and Regency-style picket systems, vinyl privacy and ranch rail fencing, and the vinyl post-and-rail with reinforced bottom rail. We stock genuine Jerith extrusions, caps, and brackets locally for fast turnaround on common repairs, and we don’t substitute cheap aftermarket vinyl where color match or structural rating matters. When aftermarket parts do make sense – stainless fasteners, drainage gravel, post-base flashing – we use better-than-spec materials that hold up in coastal damp. We service it all through our broader Jerith sales & service work across the Peninsula.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Colma
What you’ll pay depends on whether we’re repairing a section or installing a full run, plus the soil and access conditions on your property. Here’s where Colma projects typically land:
| Service | Typical Cost Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
| Home Addition | $45,000 – $130,000 |
Footing depth, drainage work, boundary coordination with a cemetery association, and tear-out of old material all move the number. A free estimate from us means we walk the line, check the soil, and hand you a written line-item quote – no vague allowances. Call (855) 901-7266 and we’ll put a real number on it.
Serving Colma, CA — Our Local Coverage Area
We’re based in the Colma area and know this community well, and we also handle Jerith repair in Broadmoor. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Colma
Because Colma’s ground is flat, low, and saturated for months at a stretch, and most original footings were poured too shallow without gravel drainage at the base. Water builds around the concrete, the surrounding soil softens, and the post starts to rack. We fix it by pulling the post, drilling deeper, adding a gravel drain layer, and re-setting with concrete that extends below the soggiest zone. Call (855) 901-7266 and we’ll look at your run before another winter does more damage.
Yes. Persistent fog keeps vinyl damp long enough to develop chalky efflorescence-like bloom and moss film, and it’s worse on north-facing or shaded runs that never dry out. We remove the film, treat the surface, and reseal caps and channels. Where pickets are too far gone, we swap in genuine Jerith replacements so the color stays consistent.
We do it regularly. That work means coordinating gate widths, sightlines, and footing locations with the cemetery association – and sometimes the town’s interment-related permitting process – rather than dealing with a typical HOA. We’ll handle that coordination as part of the estimate. For a property inside our core area, see our Colma service area coverage.
No. As an independent contractor, we’re permitted to install and repair Jerith products using genuine components we source directly. We’re not affiliated with or authorized by Jerith, which means our warranty and workmanship stand on our own reputation – not a manufacturer’s program.
If one post has heaved or a single section of rails has chalked, repair is usually the smarter spend. We’ll replace that section with genuine Jerith parts and stainless hardware, and you avoid buying material you don’t need. Full tear-out only makes sense when multiple footings have moved and the line can’t be re-trued. We’ll tell you which one you’re looking at, not whichever is more profitable. Call (855) 901-7266 for an honest read.
Service Areas Near Colma
Beyond Colma, we run Jerith service up and down the Peninsula. That includes Jerith service in West Menlo Park, Jerith service in Visitacion Valley, plus San Mateo, Burlingame, Highlands-Baywood Park, Foster City, Hillsborough, and Belmont.
Book Your Jerith Service in Colma Today
Tell me what you actually need, and we’ll figure out the right way to build it. Whether it’s a leaning post, a fog-chalked run, or a full boundary replacement, call (855) 901-7266. Estimates are free, and we’ll walk the line before we quote it.
Written by Noel Carrington, Owner at San Mateo Construction, serving Colma across the fog belt.