Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Redwood City, CA | San Mateo Construction
We provide independent Ameristar service across Redwood City, from steel entry door rehangs in 94063 to storm door closer replacements in Redwood Shores, plus Ameristar service in San Carlos and nearby areas. The thing that makes our Ameristar work different here is simple: we understand how Redwood City’s split between soft-story raised foundations and bayfill slab construction changes how a door fails. Call (855) 901-7266 for an Ameristar assessment from a contractor who actually works both sides of town.
Why Redwood City Residents Choose Us for Ameristar Service
Ameristar builds a solid door. We’ve worked their steel entry and storm door lines long enough to know exactly which hinge, sweep, and closer assemblies fail first in Bay Area salt air and hillside wind exposure, and we source direct, not through a dealer network. That same expertise applies to our Woodside Ameristar service. That means when your Ameristar slab starts dragging on the strike side in a 1940s raised-foundation house off Middlefield Road, we don’t guess. We’ve seen it before.
Noel Carrington, our owner, grew up in Baywood a few blocks from Coyote Point and spent thirty years working residential and light commercial jobs across San Mateo County. He taught our crews to re-plumb a rough opening rather than shim it forever. That’s the difference between a door that latches clean through the wet season and one that binds every winter.
We’re an independent contractor. We are not authorized, sponsored, or endorsed by Ameristar. What we are is familiar with their product line, honest about when to repair versus replace, and local to Redwood City in a way that matters when the permit counter wants to see engineered anchoring on a fill lot.
Styles & brands we work with
Common Ameristar Construction Problems We Solve in Redwood City
- Steel doors dragging on the strike side. Raised-foundation homes in 94061 and 94063 settle and rack slightly over decades. The slab stops clearing the jamb, the adjustable sill maxes out, and shimming just moves the problem. We re-plumb the frame and re-bolt the sill plates so the door works without fighting the house.
- Rust and paint blistering at the bottom rail. West-facing entries in 94062 take afternoon sun plus coastal moisture. On Ameristar steel doors sitting above humid pier-and-beam crawl spaces, the factory paint blisters and rusts where the bottom rail meets the sill. We strip, treat, and re-seal before the rust reaches the lock rail.
- Wind-driven rain pushing past the sweep. Redwood Shores 94065 gets winter rain driven hard by bay wind. The standard Ameristar sweep and threshold on a slab entry can’t hold it back, and the jamb bottom soaks through, swelling fiberglass skins. We upgrade to a heavier sweep and re-seal the threshold for that exposure.
- Storm door closers and hinge springs failing fast. Doors facing prevailing bay wind eat closers. You get slam failures and self-close failures within a few seasons. We stock Ameristar OEM closer assemblies and swap them before the door gets damaged.
- Fogged insulated glass in door lites. Redwood City’s tight, non-freezing construction keeps interior humidity up. The seal on Ameristar half-lite and full-lite insulated glass units fails, and you get haze before the door itself shows wear. We replace the IGU when the frame is sound.
Ameristar Service in Redwood City: What Local Conditions Mean for Your Equipment
Redwood City’s permit counter processes both Redwood Shores bayfill slab homes and 1940s raised-foundation downtown houses in the same queue. That means a front-door replacement that looks identical on two blocks can require engineered anchoring for wind and seismic loads on the fill lots, but frame bolting and re-leveling on the soft-story older homes. We’ve pulled permits for both types in the same month. The Ameristar door is the same quality either way; the work behind it is completely different.
On a 1948 raised-foundation house off Middlefield Road in 94063, our crew pulled an Ameristar steel entry door that had dragged for years. The sill was shimmed past its limit and the original unbolted sill plates let the jamb rack seasonally. We re-bolted and braced the cripple wall, re-plumbed the rough opening, and set a new Ameristar half-lite steel door with OEM sweep and adjustable sill. It now latches clean through the wet season.
Ameristar Models & Products We Service in Redwood City
We work across Ameristar’s residential entry and storm door lines: the Steel Entry Door in half-lite and full-lite configurations, the St. Laurent and Birmingham fiberglass entry series, and the Deluxe storm door line. For Redwood City turnaround, we keep the common failure parts on hand: OEM hinges, sweeps, adjustable sills, and closer assemblies. When an Ameristar OEM part is discontinued for a series, we move to quality aftermarket hardware that matches the original spec, and we’ll tell you that upfront. Our honest stance has not changed: rehang or re-seal a good Ameristar slab before selling a full replacement. But once rust, rot, or a cracked fiberglass skin reaches the lock rail, replacement is the smarter money.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in Redwood City
Most Ameristar work in Redwood City falls into two buckets: repairs and rehangs that run a few hundred dollars, or full replacements on homes where the door has reached the end of its life. What drives cost is the condition of the frame and the foundation behind it, not the brand. A rehang on a square rough opening is straightforward; a re-plumb on a racked 1940s jamb takes more labor. Here’s what full-project pricing looks like across the services we handle:
| Service | Redwood City Price Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Full Bathroom Remodeling | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Home Addition | $45,000 – $130,000 |
A free estimate includes a look at the door, the frame, the sill, and the foundation condition behind it. Call (855) 901-7266 and we’ll give you a written line-item quote before any work starts.
Serving Redwood City, CA — Our Local Coverage Area
We’re based in the Redwood City area and know this community well, operating as a trusted General Contractor – Redwood City. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in Redwood City
It’s usually the house. Raised-foundation homes in 94061 and 94063 settle and rack seasonally, and the original unbolted sill plates let the jamb move. The door slab itself is often fine. We re-bolt the cripple walls and re-plumb the rough opening, then re-shim the hinges so the door clears. If the door is rusted through at the bottom rail, that’s a different repair. Call (855) 901-7266 for an assessment.
Yes. The St. Laurent and Birmingham fiberglass series both take factory and custom stain finishes, so we can match the wood tone on a mid-century rancher or a newer custom hillside home. The bigger variable on 94062 entries is sun and wind exposure. We spec the sweep, threshold, and closer for that orientation so the door doesn’t leak in the first winter rain.
We do. We stock Ameristar OEM closer assemblies and hinge springs for the Deluxe storm door line, and we replace them the same visit. On Redwood City doors that face prevailing bay wind, we recommend a heavier-duty closer if the door keeps slamming even with the stock part. Call (855) 901-7266 if the closer is already failing; a slamming storm door tears itself apart quickly.
The catch is the bayfill. Most Redwood Shores homes sit on engineered fill with a high water table, and the city requires anchoring details for wind and seismic loads that older downtown homes don’t need. We pull the permit, handle the engineered anchoring spec, and coordinate the HOA design review if your community requires it. A door that would sail through permit in 94063 takes longer here, but we do it regularly.
Not automatically, but it often makes sense. If we’re already pulling permits for a full kitchen remodel in Redwood City and the entry door is a rusted steel slab from the 1980s, upgrading to a new Ameristar while the job site is open costs less than a standalone replacement later. We’ll tell you if your existing door has years left or if it’s cheaper to replace it now. Estimates are free; call (855) 901-7266.
Service Areas Near Redwood City
We service Ameristar doors and hardware throughout Redwood City and the surrounding peninsula: Redwood City service area covers 94061, 94062, 94063, 94064, and 94065. We also work in Ameristar service in South San Francisco, San Mateo, Burlingame, Foster City, and Ameristar service in Emerald Lake Hills. If you’re not sure whether we cover your street, call and ask. We’ll tell you straight.
For broader context on the brand and what we carry, see our Ameristar sales & service page. We’re the same crew no matter which side of Redwood City you live on.
Book Your Ameristar Service in Redwood City Today
Tell me what you actually need, and we’ll figure out the right way to build it. Call (855) 901-7266 to schedule a free Ameristar estimate in Redwood City, and we’ll put eyes on the door, the frame, and the foundation this week.
Written by Noel Carrington, Owner at San Mateo Construction, serving Redwood City and San Mateo County.