Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Master Halco Construction in Redwood Shores, CA | San Mateo Construction
We install and repair Master Halco fencing systems throughout Redwood Shores as an independent General Contractor – Redwood Shores, not a manufacturer-authorized dealer. The work here is different because every post hole, every fence run, every gate hinge sits on 1980s engineered bay fill that shifts, settles, and holds groundwater in ways inland Peninsula soil never does. If your Master Halco fence is leaning, rusting, or blowing out, call us at (855) 901-7266 and we’ll tell you what’s actually happening under the surface.
Why Redwood Shores Residents Choose Us for Master Halco Service
We’ve been setting posts and hanging gates in Redwood Shores long enough to know which Master Halco lines hold up to bayfront salt air and which need upgrading before they ever go in the ground. Our Master Halco sales & service work covers galvanized chain link, ornamental steel, vinyl privacy, and aluminum panel fencing, and we match OEM posts, rails, and fabric where they’re still available. Where the OEM line runs thin for salt exposure, we switch to corrosion-rated hot-dip fittings on our own judgment rather than watching a fence fail in three years.
Noel Carrington, our owner, grew up a few blocks from Coyote Point in San Mateo and spent weekends as a kid helping pour concrete footings. He’s been working residential jobs across San Mateo County for the better part of three decades, including San Mateo Master Halco service, and he still walks every Redwood Shores fence site himself before we quote. Tell me what you actually need, and we’ll figure out the right way to build it.
Styles & brands we work with
Common Master Halco Construction Problems We Solve in Redwood Shores
- Rusted galvanized chain-link fabric near the lagoons and bayfront. Salt-laden marine air off the water accelerates corrosion on Master Halco galvanized fabric and fittings far faster than you’d see in Belmont or San Mateo proper. We see pitting on the fabric and crumbling fittings inside of ten years on lagoon-side lots, and the fix is usually a fabric replacement with upgraded hot-dip hardware rather than a patch job.
- Heaved and leaning posts along settled fill. The engineered fill in Redwood Shores is young, and seasonal groundwater rises through it. Posts set into that ground heave and lean as the fill settles, pulling rails out of line and stressing gate hinges. We re-set footings deeper and wider than the original install, because the original was probably just a bag of quick-set in a shallow hole.
- Blown-out vinyl privacy panels on exposed levee-side yards. Wind uplift off the bay hits vinyl Master Halco panels hard, especially where the ground has settled unevenly and the panels were racked to follow it. A panel that’s been racked over settling ground is already under stress, and a good winter storm finishes the job. We replace blown panels and re-set the run to true before re-racking.
- Sagging ornamental steel and aluminum gates at the hinge post. The metal isn’t the problem. The original footing was undersized for the soft fill, and the hinge post slowly leans until the gate drags. We pull the post, pour a deeper pier, and re-hang the gate so it clears the settled ground instead of dragging through it.
- Fence runs pulled out of line for ADU and addition work. When a Redwood Shores homeowner adds an ADU or a room addition on fill ground, the old fence line often gets disturbed or has to move. We coordinate Master Halco fence work with the broader construction schedule so you’re not paying to re-do a fence that a concrete truck just backed over.
Master Halco Service in Redwood Shores: What Local Conditions Mean for Your Equipment
Redwood Shores sits on engineered bay fill from the 1980s, and that changes everything about how a fence gets built here. Lot lines and fence footings often rest on young, settling ground rather than native soil, and excavation and post footings get reviewed against fill and flood-elevation maps that inland Peninsula cities simply don’t require. On a lagoon-side lot off Redwood Shores Parkway, our crew replaced a leaning Master Halco galvanized chain-link run whose posts had heaved out of the fill after years of seasonal groundwater movement. We pulled the old footings, re-set deeper concrete piers with corrosion-rated hot-dip hardware, and re-hung the Master Halco gate so it clears the settled ground instead of dragging. The fence line now tracks a straight run despite the soft bay fill underneath. That’s the difference between a Redwood Shores fence job done right and one done to a generic spec.
Master Halco Models & Products We Service in Redwood Shores
We work across the Master Halco lines most common on 94065 properties: Master Halco Galvanized Chain Link Fence Systems, Master Halco Ornamental Steel Fence, Master Halco Vinyl Privacy Fencing, and Master Halco Aluminum Fence Panels. We match OEM posts, rails, fabric, and hardware where they’re still available so gates and panels stay compatible, and switch to quality corrosion-rated aftermarket fasteners and hot-dip fittings where the OEM line is too thin for bayfront salt exposure. We keep common Master Halco hardware and fittings staged locally so we’re not waiting on a distributor for a gate hinge when your fence is already down.
See the difference
Before
After
Before
After
Before
AfterMaster Halco Service Pricing in Redwood Shores
Here’s what Master Halco fence work typically runs in Redwood Shores, based on the jobs we’ve completed across the 94065 ZIP:
| Service | Typical Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| ADU Construction | $90,000 – $220,000 |
What drives cost here more than anything is the fill. Deeper footings, more concrete, and sometimes geogrid or drainage work all get priced into a Redwood Shores fence quote in ways they wouldn’t for an inland job. A free estimate from us includes a walk of the actual fence line, a check of the existing footings, and a written line-item quote. Call (855) 901-7266 and we’ll come out and look at it.
Serving Redwood Shores, CA — Our Local Coverage Area
We’re based in the Redwood Shores area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Master Halco Construction in Redwood Shores
Yes, and this is the single biggest factor in whether a fence here lasts five years or twenty-five. The engineered fill under Redwood Shores settles and holds seasonal groundwater, so we set Master Halco posts in deeper concrete piers than a standard spec calls for, and we use corrosion-rated hardware at the base. A footing sized for native San Mateo County soil will heave within a few seasons on lagoon-side lots. Call (855) 901-7266 if you want us to check your existing footings before you patch a leaning fence.
Salt-laden marine air off the bay is the culprit, and it hits galvanized fabric and fittings hard. The zinc coating on standard Master Halco galvanized chain link gets consumed much faster in Redwood Shores than in Belmont Master Halco service or San Mateo proper, especially on lots within a couple blocks of the lagoons. We often replace fabric with a heavier galvanization or add hot-dip fittings that hold up longer. Call (855) 901-7266 and we’ll tell you whether your run is worth saving or should be replaced.
Yes, and we do this regularly. ADU construction in Redwood Shores involves excavation on fill ground, and the old fence line often gets disturbed or has to shift. We coordinate the Master Halco fence work around the ADU schedule so the fence goes up once, with footings sized for the disturbed fill, rather than getting re-done after the concrete trucks leave. Call (855) 901-7266 if you’re planning an ADU and want the fence and the build on the same schedule.
It does, and it’s usually wind uplift combined with panels that were racked over uneven settling ground. When the ground settles and the fence was racked to follow it, the panels are already under tension. A strong bayfront storm finishes the job. The fix is replacing the blown panel and re-setting the run to true before re-racking, otherwise you’ll lose the same panel next storm season. Call (855) 901-7266 for a repair quote.
Depends on whether the hinge post footing is failing or the metal itself is compromised. Most of the sagging ornamental gates we see in Redwood Shores have bad footings, not bad metal. If the post is sound and the footing is the problem, we re-set the post and re-hang the gate. If the gate frame is rusted through or the hinges are pulling out of thin steel, replacement is the better call. We’ll tell you which way to go after we walk the gate. Call (855) 901-7266 for an honest assessment.
Service Areas Near Redwood Shores
Our Redwood Shores service area work extends to San Mateo, Foster City, Hillsborough, Burlingame, and Highlands-Baywood Park. We also run Master Halco service in San Carlos and Master Halco service in San Bruno for homeowners across the mid-Peninsula.
Book Your Master Halco Service in Redwood Shores Today
If your Master Halco fence is leaning, rusting, or blowing out, we’ll come walk the line and give you a straight answer. Call (855) 901-7266 to schedule your free estimate, and we’ll work around your schedule to get eyes on it fast.
Written by Noel Carrington, Owner at San Mateo Construction, serving Redwood Shores and San Mateo County.