Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Sun City, CA | San Mateo Construction
We provide independent Mr-Glass shower enclosure, mirror, and glass service across Sun City, CA, from ZIP codes 92585 through 92587. The thing that separates our Mr-Glass work here from everywhere else is the Del Webb factor: nearly every home we touch is a 1960s-to-1980s ranch where openings are out of square and HOA architectural review applies before you change anything on the front elevation. We template and cut to the actual opening instead of selling boxed stock sizes. Call (855) 901-7266 to schedule a free estimate.
Why Sun City Residents Choose Us for Mr-Glass Service
We’ve spent years fitting Mr-Glass shower enclosures, mirrors, and window glass into Sun City’s original Del Webb homes, and that’s not a small distinction. The framing in these houses has settled for 40 to 60 years, which means almost no alcove opening is square, plumb, or the size listed in any catalog. That doesn’t scare us off. It’s the entire reason we template first and cut after.
Noel Carrington, our owner, grew up in San Mateo County learning that a bad measurement costs more than a good material. He’s kept that approach in Sun City where the difference between an enclosure that drains properly and one that leaks into the drywall is often an eighth of an inch. We also operate as a single-contractor team across every system in the house, from Schluter waterproofing under the tile to the PGT or Therma-Tru window you might swap while we’re in there. One accountable crew, not three separate trades that point fingers at each other.
Styles & brands we work with







Common Mr-Glass Construction Problems We Solve in Sun City
- Rollers and bottom tracks loaded with hard-water mineral scale and inland dust. Sun City’s water is mineral-heavy, and when the Santa Anas kick up, fine dust coats everything. The combination grinds down the zinc rollers that came stock on many older Mr-Glass sliding enclosures. Doors start jumping the track, dragging, or binding within a few years. We replace failed rollers with OEM Mr-Glass hardware where it’s still available, or stainless aftermarket parts when a series is discontinued. Not the zinc rollers that fail again in a season.
- Aluminum frames and clear seals on sun-exposed glass that have baked and yellowed. East- and west-facing enclosures in Sun City take brutal Riverside County UV for six months a year. The clear vinyl seals shrink, crack, and leak, and aluminum frames can discolor. We re-seal where the glass is sound and replace the frame only when the metal itself has degraded.
- Stock Mr-Glass panels that won’t sit flush in 1960s and 1970s alcove tubs converted to showers. These original openings are rarely plumb and rarely standard width. A boxed panel leaves gaps at the curb or binds at the hinge. That’s why we template and cut for the actual opening.
- Hinge and jamb anchors pulling loose from drywall or greenboard behind aging tile. Del Webb walls were often never blocked for the weight of framed or frameless glass. When anchors pull, we cut the tile back, add proper blocking, and re-hang so the door doesn’t sag against the threshold.
- Tempered glass chipped at the edge from misalignment. A chip at the edge of a tempered panel is a stress riser. If the glass is otherwise sound we can sometimes re-hang it, but if the edge is compromised or the opening has moved, replacement is the only honest call.
Mr-Glass Service in Sun City: What Local Conditions Mean for Your Equipment
There’s a step in Sun City that doesn’t exist a few miles away in Menifee or Mr-Glass repair in Perris, and it changes the order of everything we do. Sun City’s original Del Webb homes have front-elevation and roof-color changes reviewed by the HOA architectural committee before work starts, and glass-door or window swaps that alter the front face fall under that same review. If your Mr-Glass project touches the front elevation with even a subtle glass change, we prepare the elevation drawings and submit the review package before ordering glass. On interior shower enclosures and mirror work, no review applies and we can move immediately. But on a 1968 ranch near Sun City Boulevard where the original front windows are part of the architectural character, you don’t touch the face without sign-off. Our team knows the committee’s expectations, which saves Sun City owners from ordering the wrong glass or the wrong frame finish and then eating the re-order. That’s not a layer of busywork; it’s the reason this community has held its look for six decades.
Mr-Glass Models & Products We Service in Sun City
We work on the full Mr-Glass residential range common in Sun City: frameless swing shower doors in standard 3/8-inch tempered glass, semi-frameless sliding shower enclosures on aluminum track, mirror closet doors and wardrobe sliding systems, and custom-cut mirror and glass panels for retrofit openings. When a Mr-Glass series calls for OEM rollers, hinges, or gaskets, we source them before we open the wall. When they’re discontinued, we use quality aftermarket stainless hardware, never the zinc substitutes that fail in a season. For most Sun City work we stage the common Mr-Glass track, roller, and seal sizes in our local trucks so the second trip doesn’t stretch a shower project out by another week. For more on our Mr-Glass depth, see our Mr-Glass sales & service page.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Sun City
We price Sun City Mr-Glass work by the actual opening, not by the catalog. A straight repair with OEM rollers and a re-hung door runs on the lower end; a full tub-to-shower conversion with blocking, Schluter waterproofing, and a templated Mr-Glass panel lands higher. Here are the project ranges we quote most often in Sun City:
| Service | Typical Sun City Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Every estimate is free and written so you can compare line items against other quotes. Call (855) 901-7266 and we’ll schedule a measurement.
Serving Sun City, CA — Our Local Coverage Area
We’re based in the Sun City area and know this community well, and we also provide Mr-Glass in Quail Valley. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Sun City
No. San Mateo Construction is an independent general contractor that installs and services Mr-Glass products. We are not manufacturer-affiliated or authorized. What that means in practice: we recommend what fits your opening and your budget, not what a supplier program tells us to push.
We use OEM Mr-Glass rollers, hinges, and gaskets wherever they’re still available for a given series. When a series is discontinued, we spec quality aftermarket stainless hardware rather than a cheap zinc substitute. Our first priority is a repair that lasts, not a part number that looks good on paper.
Most framed or semi-frameless Mr-Glass installations finish in one day once the glass is templated and delivered, the same standard we apply to our Mr-Glass in Good Hope. Frameless panels and tub-to-shower conversions often run two to three days including waterproofing, blocking, and HOA paperwork if the project touches the front elevation. Interior shower work typically has no committee delay. Call (855) 901-7266 and we’ll give you an honest timeline for your specific opening.
We cover frameless swing doors, semi-frameless sliders, mirror closet door systems, and custom-cut mirror and glass panels. If it’s a Mr-Glass residential glass product in a Sun City Del Webb home, we’ve likely installed or repaired one in the last season.
For Sun City homes, a Mr-Glass tub-to-shower conversion typically runs $3,500 to $10,000 depending on the tile scope, waterproofing, blocking, and whether we’re moving a drain. Walk-in showers run $4,500 to $12,000. The estimate is free and line-itemed. Call (855) 901-7266 for an exact quote based on your opening.
Service Areas Near Sun City
We serve Sun City and the surrounding communities, including Menifee, Perris, Canyon Lake, Murrieta, and Wildomar. For more on our coverage, see our Sun City service area page. If you’re a little north or east, we also cover Mr-Glass service in Wildomar and Mr-Glass service in Banning.
Book Your Mr-Glass Service in Sun City Today
Tell me what you actually need, and we’ll figure out the right way to build it. Call (855) 901-7266 to schedule your free Mr-Glass estimate in Sun City. We’ll template, measure, and give you a written price.
Written by Noel Carrington, Owner at San Mateo Construction, serving Sun City, Romoland Mr-Glass service, and the surrounding areas.