Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Midway City, CA | San Mateo Construction
We provide independent Mr-Glass construction service throughout Midway City, handling shower enclosures, glass splash panels, and window or door glass on the tract homes that dominate this unincorporated pocket of Orange County. What makes our work different here is that we template and set Mr-Glass profiles against walls that are rarely plumb or square after 60-plus years of coastal settling, then schedule the rough work around OC Public Works inspection milestones rather than any city’s own code. Call (855) 901-7266 for a free estimate on Mr-Glass installation, repair, or replacement in Midway City.
Why Midway City Residents Choose Us for Mr-Glass Service
We know Mr-Glass hardware down to the roller profiles and hinge geometries, and we know Midway City’s housing stock, too. Noel Carrington, our owner, built his career on tight framing and clean permit packages, and the crew has spent three decades working residential jobs across Southern California. We’re not a Mr-Glass dealer, and we don’t work for the manufacturer. That independence means we can match Mr-Glass profiles and OEM-compatible hardware while making honest calls about what needs replacement versus what just needs re-hinging, re-sealing, and re-templating. For Midway City’s small-lot bungalows and detached-garage ADUs, that practical judgment matters. Check out our full Mr-Glass sales & service overview or read on for what applies specifically to this city.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Midway City
- Sliding door rollers and bottom guide tracks gumming up. Midway City sits in the coastal marine layer, and that persistent damp air settles into shower enclosures. Rollers seize, tracks clog with mineral and soap buildup, and doors start jumping the rail mid-slide. Water escapes onto aging bathroom subfloor, which is a problem in 1950s and 1960s homes where the plywood under the tile has already seen decades of humidity cycling.
- Semi-frameless pivot hinges loosening on out-of-square walls. The stucco walls in Midway City’s post-war tract homes move. Framing settles, drywall gets patched over patches, and the wall a Mr-Glass pivot enclosure was originally templated to is rarely the same plane today. Hinges pull loose, the door swings past its strike jamb, and the seal fails.
- Tempered glass panels chipping or shattering in tight bathrooms. Small parcel sizes mean small bathrooms. When a door swings into a Mr-Glass panel in a cramped 1950s bath, the impact can chip or fracture the tempered glass. We see this after walls have been re-tiled or patched, when a once-fitted panel no longer has its original clearance.
- Enclosures pulling away from walls with hidden dry-rot or termite damage. Termites and dry-rot, not frost, are the recurring structural enemies here. A Mr-Glass enclosure that once sat flush can start gapping when the wall behind it swells or softens. No amount of shimming fixes that; the wall needs re-framing first.
- Failed seals and sweeps on tub-to-shower conversions. Marine-layer humidity breaks down vinyl sweeps faster than inland climates do. We replace them with OEM-compatible Mr-Glass sweeps where the profile is still current, and quality aftermarket sweeps when the original track has been discontinued.
Mr-Glass Service in Midway City: What Local Conditions Mean for Your Equipment
Midway City is unincorporated, and that changes how construction works here compared to a block over in Westminster or Huntington Beach. If you’re remodeling a bathroom or shower in Midway City, the permit comes through OC Public Works, not a city building department. County plan check, county setback rules, and impervious-coverage limits all apply, and those don’t match what a contractor did on an identical lot one street west. For Mr-Glass owners, that means the enclosure templating, any drain or wall changes behind the glass, and the final waterproofing inspection all schedule around county milestones rather than the process a General Contractor in Midway City would follow in an incorporated city. On a 1960s stucco tract bungalow off Bolsa Avenue, our crew converted a leaking fiberglass tub to a tiled walk-in shower and set a Mr-Glass frameless enclosure, but the original wall was out of plumb and the bottom plate had termite and dry-rot damage. We re-framed, re-templated the glass, and re-hung the doors so they swung true, then replaced the gummed original-style rollers on the adjacent Mr-Glass sliding door before the OC Public Works inspection. That’s the difference between installing glass and installing glass that passes county inspection the first time.
Mr-Glass Models & Products We Service in Midway City
We install and service the Mr-Glass frameless sliding shower door systems, semi-frameless pivot shower enclosures, tempered glass tub-to-shower panels, fixed splash panels, and the custom-cut mirror and glass shelf or panel sets. When parts are available, we use Mr-Glass-compatible OEM rollers, hinges, seals, and sweeps so the original profile and warranty geometry hold. When a track has been discontinued, we source quality aftermarket hardware that matches the profile rather than forcing a mismatched part. For Midway City turnaround, we keep common Mr-Glass roller sets, sweeps, and hinge bushings on the truck so most repair calls don’t need a second visit. Our Midway City service area page covers the broader remodel and construction scope we handle here.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Midway City
What you’ll pay for Mr-Glass work in Midway City depends on whether we’re re-hinging and re-sealing an existing enclosure, replacing a panel, or doing a full tub-to-shower conversion with new glass. The wall condition behind the enclosure drives cost more than the glass itself, especially in older tract homes where dry-rot or termite damage shows up once the old surround comes out. Here’s what we quote across Midway City jobs:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
A free estimate includes us measuring the existing opening, checking wall plumb and base-plate condition, and telling you whether the Mr-Glass hardware can be salvaged or needs replacement. Call (855) 901-7266 and we’ll come out to Midway City and look.
Serving Midway City, CA — Our Local Coverage Area
We’re based in the Midway City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Midway City
No, we’re an independent construction company that installs and services Mr-Glass products. Independence lets us tell you straight when a part is worth replacing versus when the wall behind it is the real problem. We can match Mr-Glass profiles and use OEM-compatible hardware without being tied to the dealer network’s pricing or lead times.
Yes. Beyond shower enclosures, we handle Mr-Glass fixed glass panels, window glass, and custom-cut mirror or shelf sets on Midway City homes. The same template-first approach applies: we measure the actual rough opening rather than trusting the original dimensions, because 60-year-old stucco walls shift. If you’re looking at replacement windows or glass doors as part of a broader remodel, or need Mr-Glass service in Fountain Valley and nearby areas, call (855) 901-7266 and we’ll scope the whole job.
We use Mr-Glass-compatible OEM rollers, hinges, seals, and sweeps whenever the current profile is still available. When a track was discontinued and the OEM part can’t be sourced, we use quality aftermarket hardware matched to the profile rather than leaving you with a door that doesn’t roll clean. We’ll never install a part that changes the door’s geometry.
Most roller, hinge, seal, and sweep repairs take one visit. A full enclosure replacement or tub-to-shower conversion depends on whether dry-rot, termite, or subfloor repairs show up once the old unit comes out, plus the OC Public Works inspection schedule. We’ll give you a written timeline before we start, and we don’t change the number unless the wall opens up and reveals something the original builder left behind.
A tub-to-shower conversion with Mr-Glass glass runs $3,500 to $10,000 in Midway City, depending on wall condition and whether we’re re-framing around termite or dry-rot damage. If the enclosure just needs a new panel or re-hinging, you’re looking at lower numbers. Call (855) 901-7266 for an exact quote, written and line-itemed, before any work starts.
Service Areas Near Midway City
We cover Midway City and the surrounding Orange County area, including Mr-Glass service in Garden Grove, Mr-Glass service in Orange, Westminster, Huntington Beach, and Fountain Valley. If you’re on the unincorporated side of the line, the county permitting rules still apply, and we know how to schedule around them.
Book Your Mr-Glass Service in Midway City Today
Tell me what you actually need, and we’ll figure out the right way to build it. For Mr-Glass enclosures, panels, or glass repair in Midway City, call (855) 901-7266 to schedule your free estimate. We’ll measure, check the walls, and give you a written quote.
Written by Noel Carrington, Owner at San Mateo Construction, serving Midway City and the surrounding Orange County area.