Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Santa Ana, CA | San Mateo Construction
We provide independent CGI cabinet and countertop installation, refacing, and repair throughout Santa Ana, CA. Our team works on CGI frameless cabinetry, shaker and raised-panel door styles, and CGI quartz and laminate surfaces in the city’s oldest bungalows, mid-century tracts, and garage conversions. The difference here comes down to housing stock: Santa Ana is one of the densest, oldest built cities in Orange County, so most CGI work we do involves out-of-square walls, narrow infill lots, and add-on rooms that were never permitted. Call us at (855) 901-7266 and we’ll send someone to look at what you’re dealing with.
Why Santa Ana Residents Choose Us for CGI Service
Santa Ana’s housing runs older than most of Orange County. A lot of what we service sits in pre-1950 downtown and Lacy-area bungalows or 1950s-60s tract homes, and those houses throw specific problems at cabinetry. Walls aren’t square. Floors slope. Add-on rooms trap moisture against what used to be exterior walls. We’ve spent years installing and retrofitting CGI cabinetry in exactly those conditions, which means we know how these boxes, finishes, and hardware behave in pre-war bungalows and mid-century tracts alike. As an independent provider we work on the product itself: layout, scribing, sealing, and repair, without any manufacturer authorization or warranty endorsement. Noel Carrington owns San Mateo Construction. He grew up helping his father pour concrete footings in San Mateo County, studied construction technology at Skyline College, and has spent three decades on residential and light commercial work. That’s the person answering for the job.
We use OEM CGI replacement doors, drawer fronts, hinges, and slides where the product line still supplies them. When OEM parts aren’t available, or cost more than the cabinet is worth, we source matched aftermarket hardware and tell you the difference up front. If you’re just starting to plan a kitchen, look through our CGI sales & service page to understand what we carry and how we work. If your scope is bigger, our Santa Ana service area coverage includes full remodels, additions, and ADUs on the same account.
Styles & brands we work with
Common CGI Construction Problems We Solve in Santa Ana
These are the failures we see repeatedly on CGI cabinets and counters in Santa Ana, and most of them trace back to how the city’s homes were built and how they’ve been lived in for decades.
- Swollen and delaminated door bottoms on frameless cabinets. Unpermitted add-on rooms, especially enclosed back porches and garage conversions, trap moisture against walls that used to breathe. That moisture wicks into the bottom edges of CGI door and drawer faces and they start to peel at the corners. We rebuild the affected runs and seal the wall before resetting anything.
- Loose full-overlay hinges and sagging soft-close slides. CGI frameless boxes rely on tight tolerances. When they’re set against the out-of-square walls common in old Santa Ana bungalows, the boxes twist and the hardware absorbs the load. Hinges loosen, drawer slides bind, and doors start to hang proud of the frame. Leveling shims and furred-out walls fix the underlying issue; replacing the hardware only buys time.
- Open seams and staining on CGI quartz and laminate tops. A kitchen sitting on a settling slab, or on an unpermitted garage-conversion floor that was never leveled, will flex the countertop. Seams open at the sink and corners. Liquids get under laminate edges. We pull the top, address the substrate, and reset with proper seam bridging.
- Finish checking and cabinet warping on south- and west-facing walls. Santa Ana’s hot, dry wind events hit unshaded box faces hard. We see hairline cracks in painted finishes and slight bowing on cabinet ends where afternoon sun pounds the wall. Cabinet placement and shading matter more here than homeowners expect.
- Water damage at base cabinets in kitchens with old galvanized plumbing. Many Santa Ana homes still run original galvanized supply lines. A slow pinhole leak inside a sink base will destroy a CGI cabinet before you ever see water on the floor. We replace the damaged box and flag the plumbing before it takes out the new one.
CGI Service in Santa Ana: What Local Conditions Mean for Your Equipment
Santa Ana’s downtown and Lacy-area bungalows are packed shoulder-to-shoulder on narrow infill lots. A CGI cabinet delivery and install often comes down to hand-carrying boxes through a 3-foot side yard and working in a 90-square-foot kitchen with no staging space. That’s a logistics problem you don’t hit on Irvine’s wide-lot tracts. Mature street trees and tight setbacks mean the truck can’t always pull close, so our crew stages materials in sequence and keeps unused boxes outside until the moment they’re needed. In 92701 and the older blocks of 92702, we also contend with add-on rooms built decades ago without permits. Kitchens that started as back porches sit on floors that were never leveled and walls that were never sealed. A CGI cabinet installed on that wall without correction will fail at the bottom edge within a few seasons. We correct the wall and floor first, then set the cabinets. That order of operations is the difference between a five-year kitchen and a twenty-year one.
CGI Models & Products We Service in Santa Ana
We install, reface, and repair CGI Euro-style frameless full-overlay cabinets, CGI shaker and raised-panel door styles, CGI quartz and laminate countertop surfaces, and CGI vanity and bath cabinetry lines. When a door or drawer front needs replacement, we order OEM CGI parts if the line still supplies them. If the line’s been discontinued or an OEM door costs more than the carcass is worth, we match a quality aftermarket panel and adjust the reveal so it sits correctly. We’ll tell you honestly when a warped or water-damaged CGI box should be rebuilt rather than refaced. Refacing a swollen cabinet just hides the problem, and it comes back looking worse. For full product details on what we sell and service, see our CGI sales & service page.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Santa Ana
Pricing for CGI work in Santa Ana tracks the scope of the job, not just the material line. Cabinets in an unpermitted add-on room usually cost more to set correctly because the wall and floor need correction first. Countertop resets on settling slabs take longer than fresh-trim installs. Here’s what we quote most often:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Remodel | $14,000 – $45,000 |
Every estimate is written and line-itemed. You see the material, labor, and any correction work separately. Call (855) 901-7266 to schedule a free estimate, and we’ll come measure the actual space before quoting a number.
Serving Santa Ana, CA — Our Local Coverage Area
We’re based in the Santa Ana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Santa Ana
No. We’re an independent contractor working on the product itself: layout, scribing, sealing, and repair. We don’t carry manufacturer authorization or warranty endorsement, which means we’re free to recommend what actually makes sense for your kitchen rather than what the brand wants pushed.
We use OEM CGI replacement doors, drawer fronts, hinges, and slides when the line still supplies them and the cost makes sense. When OEM parts are discontinued or priced beyond the cabinet’s value, we match quality aftermarket hardware and tell you exactly what we’re using before we order.
Most cabinet installs run two to five working days. Older Santa Ana bungalows with out-of-square walls and uneven floors add a day or two for correction work. A full small kitchen remodel usually runs three to six weeks depending on countertop fabrication and plumbing inspections. Call (855) 901-7266 and we’ll give you a schedule tied to your actual job.
We service CGI Euro-style frameless full-overlay cabinets, shaker and raised-panel door styles, quartz and laminate countertops, and vanity and bath cabinetry lines. If you have a line we don’t recognize, send a photo of the hinge and drawer box and we’ll tell you what you’re working with.
$9,000 to $20,000 covers what most Santa Ana homeowners end up spending on a small kitchen with CGI cabinets, a new countertop, and trim. Older homes with unpermitted prior work or plumbing that needs replacing trend toward the top of that range. We write fixed line-item quotes so the number doesn’t move once work starts. Call (855) 901-7266 for an exact quote, estimates are free.
Service Areas Near Santa Ana
We run CGI installs and repairs daily in Santa Ana’s 92701, 92702, 92735, and 92799 ZIP codes. Teams also cover nearby work in Fountain Valley, Garden Grove, Tustin, Orange, and Anaheim. Use our Santa Ana service area page for dispatch details. For brand work outside Orange County, see CGI service in Crestline and CGI service in Fontana.
Book Your CGI Service in Santa Ana Today
We’ll send someone to measure, inspect the walls and floor, and give you a straight answer on what needs correction before the cabinets go in. Call (855) 901-7266 to schedule your free estimate.
Written by Noel Carrington, Owner at San Mateo Construction, serving Santa Ana since the company’s founding.