Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in San Juan Bautista, CA | San Mateo Construction
We provide independent CGI construction service across San Juan Bautista and nearby communities like CGI in Aromas, including full kitchen and bath remodels, cabinet installation and refacing, and countertop work. What makes our CGI work different here is the housing stock itself. Much of San Juan Bautista near the Mission is old adobe and unreinforced masonry, so a cabinet run that would bolt straight into studs in Hollister needs a completely different anchoring approach here. Call (855) 901-7266 for a free estimate.
Why San Juan Bautista Residents Choose Us for CGI Service
We’re not affiliated with CGI or any manufacturer, and we’re honest about that. What we are is a licensed general contractor that has spent years installing and retrofitting CGI cabinetry, countertops, and shower systems in old houses. The difference shows up on the job site. Noel Carrington, our owner, grew up helping his father pour concrete footings and has spent three decades running residential and light commercial work across San Mateo County. He reads framing and foundation conditions before a single cabinet box gets spec’d, because in San Juan Bautista, what’s behind the wall matters as much as what goes on it.
We carry genuine CGI components where they matter most: hinges, drawer slides, connectors, and anything load-bearing. For sealants and shims on old adobe or out-of-square plaster walls, we use aftermarket products that outperform OEM under those specific conditions. That’s not a downgrade. It’s the right call for the house you actually live in.
Styles & brands we work with
Common CGI Construction Problems We Solve in San Juan Bautista
- Frameless CGI boxes pulling away at seams. Euro-style frameless cabinets are unforgiving. If the wall behind them isn’t flat and plumb, the boxes twist and door alignment goes bad within months. That happens constantly in San Juan Bautista, where old plaster and adobe walls are rarely square. We shim and scribe every box before setting it.
- Moisture-driven finish failure on cabinet ends and toe kicks. The San Juan Valley gets fog influence in winter and warm, dry summers. Homes with poor drainage near slab edges and old foundations see moisture wick up into cabinet ends and kick plates. The finish swells, delaminates, and looks tired within a few seasons. We address the drainage or slab condition rather than just swapping the cabinet part.
- Quartz and granite CGI surfaces cracking over settling substrates. Expansive soils and proximity to the San Andreas Fault mean floors in San Juan Bautista move. A stone countertop set directly over an unsupported or uneven cabinet run will crack. We check level and deflection before the slab goes down, and we correct it if needed.
- Shower and tile system failures at the pan and curb. Mid-century bathrooms with shifted framing are common around here. A CGI shower enclosure installed over framing that has moved will fail at the pan or curb within a couple of years. We inspect what’s underneath before any tile or glass goes in.
- Hardware and hinge wear from humidity swings. San Juan Bautista’s dry summers and cool, damp winters stress cabinet hardware. We see soft-close mechanisms binding or failing earlier than expected. Where the load is light, quality aftermarket hardware often lasts longer than the original spec.
CGI Service in San Juan Bautista: What Local Conditions Mean for Your Equipment
San Juan Bautista is a small, historic mission town of about 1,900 people, and much of the construction work happens within or right next to a State Historic Park and the downtown historic corridor. That changes how CGI work gets done. In the tract-home subdivisions of Hollister or CGI service in Gilroy, a kitchen remodel means opening drywall over stud framing and moving on. Here, we open walls on a downtown or Mission-adjacent property and find unreinforced adobe, old brick, or hand-framed wood that predates any modern building code. A CGI cabinet run cannot anchor into adobe the way it would in a framed wall. We fur out with reinforced ledgers, shim and scribe every box, and set surfaces on a level, stable substrate. That’s the gap between a remodeler who knows CGI products and a contractor who knows how they actually perform in San Juan Bautista’s housing stock. On a kitchen remodel near the Mission, we opened walls and found unreinforced adobe behind old plaster. The CGI cabinet run couldn’t be anchored the way it would in a frame house, so we furred out with a reinforced ledger and shimmed and scribed every box before setting the quartz. The result was a square, plumb installation that respected the adobe instead of cracking it.
This work doesn’t come up in neighboring cities, and it’s why we approach CGI service in San Juan Bautista as a construction problem first and a product install second. For broader context on how we serve this area, see our San Juan Bautista service area page.
CGI Models & Products We Service in San Juan Bautista
We work on the full CGI line that shows up in kitchens and baths around here: Euro-style frameless cabinetry with full-overlay doors and soft-close hardware, shaker and raised-panel door series, quartz and granite countertop programs, and tile and glass shower enclosures. For frameless runs especially, we stock the common hardware locally so San Juan Bautista turnaround stays quick. When a hinge or connector is genuinely load-bearing or tied to a warranty, we use genuine CGI parts. Where old-house conditions call for something different, we explain exactly what we’re using and why. You can read more about how we handle the brand across all locations on our CGI sales & service page.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in San Juan Bautista
Every San Juan Bautista project is different, so pricing depends on what’s behind the walls and what condition the substrate is in. Here are the ranges we work within for CGI-related work in this area:
| Service | Typical Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Cabinet Installation & Refacing | $4,000 – $13,000 |
| Quartz & Granite Countertops | $2,000 – $6,500 |
| Full Bathroom Remodeling | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
The number moves based on whether we’re dealing with modern framing or adobe retrofit conditions, whether the floor needs leveling, and how much custom shimming and scribing the walls require. A free estimate includes a site inspection and a written line-item quote, so you’ll know what you’re paying for before anything starts. Call (855) 901-7266 to schedule yours.
Serving San Juan Bautista, CA — Our Local Coverage Area
We’re based in the San Juan Bautista area and know this community well, with experience extending to CGI repair in Prunedale. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in San Juan Bautista
Yes, but not the way they would be in a stick-frame house. We can install CGI cabinets into adobe and unreinforced masonry walls by furring out with reinforced ledgers, shimming every box, and anchoring into stable points rather than relying on the adobe itself. Call (855) 901-7266 to have us look at your specific walls.
It can. Projects within the downtown historic corridor or State Historic Park boundaries may need design review, and matching materials or preserving original features sometimes becomes a condition of approval. We have worked through those processes and can tell you early whether your project will trigger them. Call (855) 901-7266 for a straight answer on your property.
San Juan Bautista gets warm, dry summers and cool, fog-influenced winters, plus expansive soils and seismic activity near the San Andreas Fault. Moisture wicking near old slab edges causes finish failure, and floor movement cracks stone surfaces set over unlevel substrates. Most CGI product failures here trace back to what the product was installed on, not the product itself.
Yes. We’re a licensed general contractor, which means the same crew that installs your CGI cabinets can also address the foundation, seismic retrofit, and structural work underneath them. This matters in San Juan Bautista, where old foundations and earthquake exposure are routine. We don’t set cabinets on a problem we haven’t looked at.
No. We are an independent construction firm and not affiliated with or authorized by CGI. Our credibility comes from years of installing and retrofitting CGI products in old, code-challenged housing, not from a manufacturer relationship. Call (855) 901-7266 and we’ll tell you exactly what that means for your project.
Service Areas Near San Juan Bautista
We serve San Juan Bautista and the surrounding region, including San Mateo, Burlingame, Highlands-Baywood Park, Foster City, Hillsborough, and Belmont. For similar CGI work in the high desert, see our CGI service in Piñon Hills page, and for the Silver Lakes area, our CGI service in Silver Lakes page.
Book Your CGI Service in San Juan Bautista Today
Tell me what you actually need, and we’ll figure out the right way to build it. That’s the way Noel runs every San Juan Bautista job. Call (855) 901-7266 to schedule your free estimate, and we’ll walk your home and give you a written line-item quote before any work starts.
Written by Noel Carrington, Owner at San Mateo Construction, serving San Juan Bautista and surrounding communities.