Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Corralitos, CA | San Mateo Construction
We provide independent CGI cabinet installation, refacing, and full kitchen remodeling across Corralitos, CA, from ranch homes off Browns Valley Road to custom builds up in the hills, and we also cover CGI repair in Interlaken. The thing that separates our CGI work here from what you’d get from a generic contractor is that we know how Corralitos’s coastal damp and well-and-septic reality act on these boxes and doors. If you need CGI cabinets installed, repaired, or refaced in Corralitos, call (855) 901-7266 for a free estimate.
We’ve been working with CGI sales & service cabinetry in this valley long enough to know exactly which failures are local, which are manufacturing, and which are simply the house settling. We’re an independent CGI service provider, which means we recommend repair over replacement whenever it makes sense and we’re not tied to any manufacturer’s sales targets.
Why Corralitos Residents Choose Us for CGI Service
We’ve installed and serviced CGI cabinetry across the Corralitos service area for years, from original ranch kitchens to full custom builds. We know how CGI’s Milano flat-panel thermofoil doors hold up in a kitchen that goes through wet winters and summer fog cycles, and we know what’s repairable versus what needs replacing. Noel Carrington, our owner, has spent three decades on residential jobs across the Bay Area and the Santa Cruz County foothills. He’ll tell you straight when a hinge is worth saving and when a sink base has to go.
Corralitos homeowners tend to call us because we quote the job the same way we’d quote it for ourselves: line by line, with the actual parts listed. We keep OEM CGI hinges, glides, and touch-up finishes on hand for warranty-compatible work. When a part is discontinued or back-ordered, we’ll tell you what the aftermarket equivalent is and why it’s fine.
Styles & brands we work with
Common CGI Construction Problems We Solve in Corralitos
- Thermofoil delamination and peeling on cabinet doors. This is the number one call we get from Corralitos kitchens. The Milano flat-panel thermofoil looks clean until the coastal damp gets into it, then the laminate lifts at the edges and starts peeling. We can often replace just the affected doors rather than the whole run.
- Particleboard core swelling at sink bases and dishwasher openings. A slow well-pump leak or persistent humidity under the sink soaks into the core and it swells. We replace those boxes with CGI’s all-plywood construction, which holds up far better in a rural house on a well and septic system.
- Soft-close hinge and drawer-glide failures from seasonal humidity swings. Older Corralitos ranch homes without central dehumidification put real stress on cheap hardware. We swap in OEM CGI hinges or quality aftermarket soft-close glides and the drawers work like new.
- Face-frame separation and finish cracking on out-of-square walls. Many older Corralitos ranch houses have settled over decades. If the original cabinets were installed without proper shimming, the frames pull apart and the finish cracks. We can correct the alignment and repair the affected sections.
- Finish haze and corner wear from years of household use. Not everything is moisture. Daily wear shows up on CGI door corners and drawer fronts. We can refinish or replace the worn faces and blend them in with the existing run.
CGI Service in Corralitos: What Local Conditions Mean for Your Equipment
Here’s what you won’t read on a national CGI page: because Corralitos homes are on wells and septic, a kitchen remodel here often triggers Santa Cruz County Environmental Health review if plumbing fixtures or drain lines change. That doesn’t happen in Watsonville or Aptos, where municipal water and sewer mean simpler kitchen permits. So when a Corralitos homeowner wants to install new CGI cabinets around a sink that’s being relocated, or add a dishwasher where there wasn’t one, we factor the county review into the schedule and the permit package before the first cabinet comes out of the box. It’s not a complication you can skip, and working with a contractor who already knows the process saves you weeks and a lot of phone calls.
On a ranch-style home off Browns Valley Road, we found the original CGI thermofoil doors delaminating above a sink base that had swelled from a slow well-pump leak. We replaced the sink base with a plywood-box CGI cabinet, installed new Shaker doors, and reset the soft-close glides, then added a bead of sealant and a small ventilation fix so the same moisture cycle wouldn’t return.
CGI Models & Products We Service in Corralitos
We work with CGI’s Milano flat-panel door in thermofoil, the Shaker-style wood-door cabinets, and the all-plywood box construction line. That covers most of the CGI kitchens we see in Corralitos, from the original installations in older ranch homes to recent custom builds. For repairs we default to OEM CGI hinges, glides, and touch-up finishes so the work stays warranty-compatible. When CGI has discontinued a part or the lead time is unreasonable, we use proven aftermarket soft-close hardware and tell you exactly what we’re substituting and why it’ll hold up.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Corralitos
What you’ll pay for CGI work in Corralitos depends on whether we’re repairing, refacing, or doing a full install, plus the current condition of the boxes — our CGI repair in Amesti follows the same pricing. Here’s what we see most often:
| Service | Typical Range in Corralitos |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
Refacing a full CGI kitchen usually lands on the lower end; a full remodel with new boxes, counters, and a backsplash runs toward the middle or upper end. Every estimate is free and line-itemed, so you see exactly what the materials and labor cost. Call (855) 901-7266 and we’ll set up a time to look at your kitchen.
Serving Corralitos, CA — Our Local Coverage Area
We’re based in the Corralitos area and know this community well, and we also handle Freedom CGI service nearby. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Corralitos
Replacing cabinet boxes and doors alone generally doesn’t trigger a permit. But if you’re also moving the sink, adding a dishwasher, or changing drain lines, Santa Cruz County Environmental Health will likely need to review the plumbing portion of the job. We handle that as part of the project scope. Call (855) 901-7266 for a free estimate and we’ll tell you exactly what applies to your house.
Thermofoil peels when moisture gets between the laminate and the MDF core. Corralitos’s wet winters and summer fog create humidity cycles that accelerate this, especially in kitchens without good ventilation. We can usually replace the affected doors without tearing out the whole run.
In many cases, yes. CGI’s Shaker and Milano door styles are still available, and we can order matching doors or refinish existing ones to blend. The match isn’t always perfect on older kitchens, but we’ll show you the options before you commit.
If we’re doing a full kitchen remodel with new boxes, the wet season matters because we’re often working around exterior access, material delivery on rural lanes, and drainage around the property. Interior cabinet installation itself can happen year-round, but we schedule the rough work to avoid the heaviest rain. Call (855) 901-7266 and we’ll give you a realistic timeline for your project.
Refacing is a smart option when the cabinet boxes are still sound and the layout works for you. You keep the structure, replace doors and drawer fronts, and avoid the plumbing or permit complications that come with pulling boxes. But if the sink base has swelled from a well leak, we’ll recommend replacing that box with plywood rather than refacing over a compromised core. Tell me what you actually need, and we’ll figure out the right way to build it.
Service Areas Near Corralitos
We serve Corralitos and the surrounding communities, including CGI service in Aptos Hills-Larkin Valley and CGI service in La Selva Beach. If you’re a bit farther out, we also work in San Mateo, Burlingame, Foster City, and Belmont.
Book Your CGI Service in Corralitos Today
Call (855) 901-7266 to schedule your free estimate. We’ll come out to your Corralitos home, look at the cabinets, and give you a written line-item quote. No pressure, no vague numbers.
Written by Noel Carrington, Owner at San Mateo Construction, serving Corralitos and the greater Santa Cruz County foothills.