Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Construction in Boulder Creek, CA | San Mateo Construction
We provide independent CertainTeed construction service across Boulder Creek, from re-roofs and repairs to siding and standing seam metal work. The one thing that separates CertainTeed work here from work anywhere else: Boulder Creek sits in a Very High Fire Hazard Severity Zone, so nearly every exterior project triggers a wildfire-defensible construction review that changes shingle specs, venting requirements, and the permit path before the first bundle gets torn off. We know that review process because we go through it on steep, tree-covered Boulder Creek lots every month. Call (855) 901-7266 for a free estimate.
Why Boulder Creek Residents Choose Us for CertainTeed Service
We’re not a roofing-only outfit that happens to carry CertainTeed. We’re a general contractor with full exterior-to-interior scope, and CertainTeed is one of the brands we spec weekly on Boulder Creek homes and CertainTeed in Felton, alongside GAF and Owens Corning. That means the same crew managing your CertainTeed re-roof can also handle the window replacement, the siding repair, or the deck rebuild down the line, under one contract and one accountable team.
Noel Carrington leads our CertainTeed work. He grew up pouring concrete footings with his father and has spent nearly three decades on residential and light commercial jobs across San Mateo County, including CertainTeed repair in Ben Lomond. When it comes to a CertainTeed assembly on a steep Boulder Creek lot, he’ll tell you straight: “Tell me what you actually need, and we’ll figure out the right way to build it.” That approach matters here, where a roofline decision has to survive wildfire review, wet-winter cycling, and a road so narrow you can’t get a full-size truck turned around.
We stock genuine CertainTeed accessories, ridge vent, starter, WinterGuard underlayment, and matching shingle bundles for fast local turnaround. And we’re upfront that we are an independent contractor. We’re not authorized, sponsored, or warranted by CertainTeed. What we are is experienced with their product lines under Boulder Creek’s specific conditions.
Styles & brands we work with
Common CertainTeed Construction Problems We Solve in Boulder Creek
- Valley leaks where redwood needles hold moisture. Boulder Creek’s redwood canopy drops needles and fine debris into roof valleys all year, and during the October – April rainy season that buildup holds water against WinterGuard underlayment and shingle edges. We routinely see underlayment breakdown at valleys and penetrations on homes where gutters haven’t been cleaned since summer. The fix is typically a valley re-flash with new WinterGuard, not just a shingle patch.
- Landmark shingle granule loss on south and west slopes. After a wet winter, Boulder Creek’s dry summers bake south- and west-facing roof planes hard. The Landmark shingles on those slopes lose granules faster than the rest of the roof, especially where defensible-space clearing has removed the shade the roof was originally built under. Edge curl follows, then cracking, then leaks at the eave line.
- Presidential Shake debris trapping and ember catch. Thicker-profile shingles like Presidential Shake have deep shadow lines. On heavily treed Boulder Creek lots, those recesses collect pine needles and redwood litter, and during fire season wind-driven embers find exactly those voids. It’s one reason we often recommend a Class A assembly with ember-resistant venting for these homes.
- Damp north-facing walls causing Cedar Impressions to cup. On north-facing canyon walls where fog and tree canopy keep surfaces damp into late spring, Cedar Impressions and Monogram vinyl siding panels wick moisture at end grain and start to cup. Once panels cup, water gets behind them and the framing starts to suffer. We replace the affected courses and correct the drainage plane behind them.
- WUI review flags on ridge and soffit venting. When a Boulder Creek home goes through wildfire-defensible construction review, old ridge and soffit venting frequently gets flagged for missing ember screens. We pair CertainTeed ridge vent with compliant ember-resistant mesh as part of the same re-roof permit, so the venting upgrade doesn’t become a separate inspection headache later.
CertainTeed Service in Boulder Creek: What Local Conditions Mean for Your Equipment
Boulder Creek’s Very High Fire Hazard Severity Zone designation is the single biggest factor shaping how CertainTeed work gets specified here. Even a straightforward re-roof or deck replacement can pull the project into a wildfire-defensible construction review plus a new vegetation-management plan. That means our CertainTeed scope on a Boulder Creek home often has to document a Class A assembly, ember-resistant venting, noncombustible drip edge, and defensible-space clearance as part of the same permit package. A contractor working Scotts Valley or a valley-floor job never faces that requirement. On a steep private drive off Bear Creek Road, we re-roofed a 1960s redwood-and-wood-frame cabin whose original deck had been re-sheathed over skipped boards and whose Landmark shingles were curling along the west slope. Because the lot sits in the Very High Fire Hazard Severity Zone, our scope paired a Class A CertainTeed assembly with ember-resistant ridge venting, noncombustible drip edge, and a documented defensible-space clearing plan before we tore off a single bundle. We staged materials by shuttle from a pullout at the bottom of the drive and chuted tear-off debris to one spot, then closed it out with new WinterGuard at the valleys where needle buildup had been holding water against the deck.
CertainTeed Models & Products We Service in Boulder Creek
We install, repair, and replace across the CertainTeed exterior line, including CertainTeed repair in Lompico: Landmark asphalt shingles including Landmark Pro and Landmark Solaris for cool-roof reflectance; Presidential Shake and Presidential Solaris designer shingles; WinterGuard waterproofing underlayment; and Cedar Impressions or Monogram vinyl siding for the building envelope. When a repair makes sense, we use genuine CertainTeed shingles and accessory components rather than mismatched substitutes, so the assembly details hold together for inspection. When the deck is compromised or the slope is too steep and tree-covered for a patch, we’ll say so and recommend a tear-off with a full Class A assembly instead of selling you a repair that won’t survive the next wildfire review or wet winter.
See the difference
Before
After
Before
After
Before
AfterCertainTeed Service Pricing in Boulder Creek
Pricing below reflects our current ranges for Boulder Creek work. What drives cost here more than anything is access: a narrow private road with no turn-around means shuttling materials, a steep pitch means fall protection and slower tear-off, and the WUI requirement often adds ember-resistant venting and documentation time. Here’s what to expect:
| Scope | Typical Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Metal Roof Installation | $15,000 – $40,000 |
| Tile Roof Repair | $600 – $2,500 |
| Home Addition | $45,000 – $130,000 |
Every estimate includes a written line-item breakdown, a permit path review, and honest guidance on repair versus replacement. Call (855) 901-7266 to schedule a free estimate.
Serving Boulder Creek, CA — Our Local Coverage Area
We’re based in the Boulder Creek area and know this community well, and we also provide CertainTeed service in Brookdale. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CertainTeed Construction in Boulder Creek
Yes. Because Boulder Creek sits in a Very High Fire Hazard Severity Zone, a re-roof typically triggers a wildfire-defensible construction review and often a vegetation-management plan alongside the standard building permit. You’ll need documentation of a Class A assembly, ember-resistant venting, and defensible-space clearance. We handle that paperwork as part of the same scope. Call (855) 901-7266 and we’ll tell you exactly what your specific lot will require.
For most Boulder Creek canyon homes, we recommend Landmark Pro with a documented valley and penetration detail rather than a thicker-profile shingle. Deep-profile shingles like Presidential Shake trap debris and embers in the shadow lines. On a shaded north-facing slope, the thinner Landmark Pro profile sheds needle litter more readily and dries faster between winter storms. We’ll confirm the right spec after seeing your slope and canopy cover in person.
Usually not directly. Most narrow private drives off Bear Creek Road don’t give a full-size material truck room to turn around. We stage shingle bundles at a pullout or turnout and shuttle materials up in smaller loads, and we’ve done this on dozens of Boulder Creek jobs. It adds a little time but keeps the driveway from getting torn up. Your estimate will account for access labor up front, so call (855) 901-7266 and we’ll price it honestly.
Yes, often. Standing seam metal gives you a Class A rated roof surface with no shingle voids for embers to catch, and it sheds redwood needles better than any asphalt profile. The trade-off is cost: metal roof installation runs $15,000 – $40,000 in Boulder Creek, roughly double a Landmark re-roof. For a cabin you plan to keep, it’s frequently the most defensible choice for wildfire review, and we install both CertainTeed asphalt systems and standing seam metal.
It can. If the roof deck was re-sheathed over skipped boards or the structure was never permitted, the inspector may require sheathing corrections before the new CertainTeed assembly goes on. We run into this regularly on older Boulder Creek cabins. The added deck work becomes part of the same permit and scope, so you’re not left with a torn-off roof and a stop-work order. Call (855) 901-7266 for an exact quote on your cabin’s condition.
Service Areas Near Boulder Creek
We also provide CertainTeed sales & service across the San Mateo County footprint. From our Boulder Creek service area, we cover nearby communities including San Mateo, Burlingame, Highlands-Baywood Park, Foster City, Hillsborough, and Belmont. We also reach CertainTeed service in Seven Trees and CertainTeed service in Lexington Hills for homeowners on the valley side.
Book Your CertainTeed Service in Boulder Creek Today
If you need a CertainTeed re-roof, siding repair, or standing seam metal installation in Boulder Creek, call (855) 901-7266 for a free estimate. We’ll walk your lot, check the access and the fire-review requirements, and give you a written line-item quote.
Written by Noel Carrington, Owner at San Mateo Construction, serving Boulder Creek since our founding.