GAF Construction in Ben Lomond, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

GAF Construction in Ben Lomond, CA | San Mateo Construction

We provide independent GAF roofing service across Ben Lomond, from emergency repairs on storm-damaged slopes to full Timberline HDZ replacements on post-CZU rebuilds. The thing that separates GAF work here from anywhere else is the redwood canopy: it never stops dropping needles, it holds moisture against the roof deck for months, and it punishes any flashing detail that isn’t perfect. Call (855) 901-7266 for a free estimate on any GAF roof in the 95005 ZIP.

Call (855) 901-7266

We’re San Mateo Construction, a licensed general contractor led by Noel Carrington. We’re not a GAF-authorized installer, and we don’t pretend to be. What we are is a crew that has spent years pulling apart GAF shingle systems on steep, tree-heavy mountain lots and learning exactly where they fail and why. GAF sales & service is one part of a much broader whole-home construction practice, which means the same team that re-roofs your cabin can also rebuild the deck that caused the leak in the first place.

Why Ben Lomond Residents Choose Us for GAF Service

Most roofing crews in the Santa Cruz Mountains know how to nail shingles. Far fewer understand how a GAF Timberline HDZ assembly behaves when it sits under a hundred-foot redwood for twenty years, shaded on the north slope, getting rained on for five straight months and never fully drying out. We’ve seen the exact failure patterns that Ben Lomond and Mount Hermon produce, and we’ve learned to address them at the deck level, not just the shingle surface.

Noel Carrington grew up in the Baywood neighborhood of San Mateo pouring concrete footings with his father, studied construction technology at Skyline College, and has spent close to three decades on residential and light commercial work across San Mateo County. That background means when we show up to your Ben Lomond property, we’re reading the whole structure: roof, walls, drainage, foundation. A leak at the valley isn’t always a shingle problem. Sometimes it’s a deck tie-in flashing that was never right from the day it was installed.

We use genuine GAF ridge caps, starter strips, and underlayment where the roof is a GAF assembly. Where a quality aftermarket flashing or vent outperforms the factory piece, we say so. Single-point accountability means the roofer and the carpenter are the same team, under the same contract.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Common GAF Construction Problems We Solve in Ben Lomond

  • Redwood needle and moss damming in valleys and behind ridge caps. Timberline HDZ roofs on tree-heavy Ben Lomond lots accumulate needles faster than most homeowners realize. Once they pack into valleys, water backs up and rots the decking beneath shingles that still look fine from the ground. We clear the debris, inspect the deck, and rebuild the valley with proper underlayment so it drains again.
  • Wind-lifted tabs on Timberline HDZ after winter storm gusts. The San Lorenzo Valley funnels wind in odd ways, and once GAF sealant strips get compromised by constant canopy shade and moisture, tabs start lifting. A lifted tab catches more wind, then creases or tears. We re-secure or replace affected tabs before a full blow-off happens.
  • Granule loss on shaded north-facing slopes. Ben Lomond has plenty of roofs that barely see sun from November to April. GAF shingles that stay perpetually damp shed granules faster than the same shingle would on a sunny San Mateo hillside. When we see bald spots forming, we tell you honestly whether repair or replacement makes more financial sense.
  • Flashing failures at pier-and-post roof-to-wall junctions. Older redwood-era cabins and newer additions on sloped parcels often have awkward ties between roof planes and vertical walls. Steep-slope runoff finds those gaps first. We re-flash using proper step flashing and ice-and-water membrane at every transition.
  • Post-CZU rebuilds with ember-resistant gaps. Plenty of Ben Lomond roofs are recent rebuilds where fire-hardening details matter as much as water-tightness. We inspect Class A assemblies and ember-resistant eaves and vents to make sure the fire protection isn’t creating new moisture entry points.

GAF Service in Ben Lomond: What Local Conditions Mean for Your Equipment

Because the 2020 CZU Lightning Complex burned through the San Lorenzo Valley and reshaped rebuilding priorities here, a lot of the roofs we touch in Ben Lomond are post-fire rebuilds where the owner is balancing fire-hardening against the same steep-slope and root-zone constraints that existed before the fire. That’s a uniquely Ben Lomond tension. A flatland roofer installing a fire-resistant Class A assembly in, say, San Mateo doesn’t have to engineer the same roof to shed water off a 30-degree slope while surrounded by redwood roots that limit where downspouts can daylight. Here, the fire code and the hillside drainage code pull in opposite directions, and the roof is the meeting point.

What this means for GAF owners specifically: the underlayment choices matter more than the shingle choice. On a steep Ben Lomond rebuild, we spec GAF’s heavier underlayment and ice-and-water barrier at every valley and eave, because the roof is going to see runoff volumes that overwhelm standard felt in a single winter storm. The shingle is just the visible top layer of a system, and on this terrain the hidden layers do the real work.

GAF Models & Products We Service in Ben Lomond

We work on the full GAF shingle lineup you’ll find across Ben Lomond’s housing stock: Timberline HDZ architectural shingles on mid-century and newer builds, Timberline UHDZ premium architectural on higher-end mountain homes, Grand Sequoia heavyweight designer shingles on custom rebuilds, and Royal Sovereign three-tab shingles still holding on to older redwood-era cabins. For GAF assemblies in Brookdale and nearby areas, we stock genuine GAF ridge caps, starter strips, and matching underlayment locally so we’re not waiting on a distributor when your roof is open to the weather. Where the brand doesn’t make a specific flashing or vent configuration, we use proven aftermarket pieces that perform better for our hillside conditions.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

GAF Service Pricing in Ben Lomond

Roof work in the Santa Cruz Mountains costs more than flatland work because access is harder, disposal costs run higher, and the detailing takes longer. Here’s what we’re quoting across the San Lorenzo Valley right now:

GAF Service Typical Price Range
Roof Replacement $8,000 – $20,000
Roof Repair $400 – $1,800
Metal Roof Installation $15,000 – $40,000
Tile Roof Repair $600 – $2,500

Your final number depends on roof pitch, deck condition, how much redwood limb work is required, and whether you’re on a post-CZU rebuild with additional fire-hardening requirements. Every estimate is free, written, and line-itemed. Call (855) 901-7266 and we’ll walk your roof in person.

Serving Ben Lomond, CA — Our Local Coverage Area

We’re based in the Ben Lomond area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – GAF Construction in Ben Lomond

Service Areas Near Ben Lomond

From our San Mateo County base, we serve mountain and coastal communities throughout the region. Along with Ben Lomond, we work in Ben Lomond service area plus nearby Felton, Boulder Creek, Scotts Valley, and Bonny Doon. You’ll also find us across the hill in Burlingame, Foster City, and Hillsborough. For GAF-specific service in neighboring mountain towns, see our pages for GAF service in Bonny Doon and GAF service in Felton.

Book Your GAF Service in Ben Lomond Today

On a sloped parcel off the San Lorenzo River corridor near GAF work we’ve done in Lompico, our crew tore off a failing Royal Sovereign three-tab roof on an older redwood-era cabin and found the north valley packed with decades of redwood needles holding water against soft decking. We replaced the rotted sheathing, laid a GAF underlayment and Timberline HDZ system with proper ice-and-water flashing at the cabin’s roof-to-wall tie-ins, and cut back overhanging limbs so the new roof could actually shed rain and debris. That’s the kind of work Ben Lomond demands, and it’s the kind we do. Call (855) 901-7266 to schedule your free estimate.

Written by Noel Carrington, Owner at San Mateo Construction, serving Ben Lomond since the CZU rebuild era.

Need Construction help in Ben Lomond? Licensed & insured · Free on-site estimates response · free estimates
Call (855) 901-7266
Areas We Serve

Request a Free Estimate in Ben Lomond

Tell us what you need — San Mateo Construction responds fast. No obligation.

When you submit this form, you confirm you have read our Privacy Policy and consent to receive communications via phone, email, or SMS about your service request, including from the local pros who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch